一种污泥半静态强制通风堆肥系统的设计

为了提高堆肥效率,设计了一套半静态强制通风堆肥系统,并对其进行了堆肥应用试验。研究表明,该堆肥系统各部件设计较为合理,堆肥实验进程顺利,升温迅速,通风、保温等系统运行良好,堆肥产品腐熟度较好,性质稳定。     

农村变电站生活污水处理现状与探讨

我国大部分变电站位于农村地区,因无接入城市污水管网条件,农村变电站生活污水需就地处理后达标排放。变电站生活污水存在水量少、时变化系数大等特点,现有处理工艺不能正常运行或无法达标排放。本文借鉴农村生活污水处理技术,提出了生物组合法处理对策,可为变电站生活污水处理提供参考。     

The composting potential of different organic solid wastes: experience from the island of Crete

For the past 20 years, the National Foundation for Agricultural Research in Crete and the School of Agricultural Technology of the Technological and Educational Institute of Crete have been involved in a number of research and development activities, related to the production and evaluation of compost derived from a variety of local solid, mainly agricultural organic wastes. Materials such as olive press cake, olive tree leaves (OTL) and branches, vine branches (VB), pressed grape skins (PGS), pig manure (PM), sewage sludge and the organic fraction of municipal solid waste (OFMSW) have been evaluated for their behaviour during composting, their compatibility in mixtures and the quality of the end product. The quality evaluation included both a detailed physiochemical (pH, electrical conductivity (EC), nutrients concentration, heavy metal concentration, etc.) and biological analyses (pathogenic microorganisms). It also included an agronomic evaluation, in which composts were used either as a soil amendment or as a component for substrates in open air or covered (greenhouse) cultivation mainly of local vegetables (tomatoes, cucumbers, etc.). All materials were composted successfully, especially when mixed. The end products contained large amounts of organic matter, usually combined with an increased EC value. Pressed grape skins should be considered as the ideal raw material, producing a high quality compost, with the lowest EC value (1.57 mS cm(-1)) and the largest organic matter concentration (84.50%), compared to all other materials. When any of the produced compost was used in a ratio of 30% by volume (v/v), it increased plant growth, whereas in larger volumes, it presented phytotoxic behaviour, inhibiting both root and shoot development.     

Enhanced nitrogen removal upon the addition of volatile fatty acids from activated sludge by combining calcium peroxide and low-thermal pretreatments

This study investigated a combined low-thermal and CaO₂ pretreatment to enhance the volatile fatty acid (VFA) production from waste activated sludge (WAS). The fermentative product was added to a sequencing batch reactor (SBR) as an external carbon source to enhance nitrogen removal. The results showed that the combined pretreatment improved WAS solubilization, releasing more biodegradable substrates, such as proteins and polysaccharides, from TB-EPS to LB-EPS and S-EPS. The maximum VFA production of 3529 ± 188 mg COD/L was obtained in the combined pretreatment (0.2 g CaO₂/g VS + 70 °C for 60 min), which was 2.1 and 1.4-fold of that obtained from the sole low-thermal pretreatment and the control test, respectively. Consequently, when the fermentative liquid was added as an external denitrification carbon source, the effluent total nitrogen decreased to Class A of the discharge standard for pollutants in rural wastewater treatment plants in most areas of China.     

固定化脱色菌－活性污泥的脱色性能研究

将所筛选的高效脱色菌群,采用聚集－交联法固定在活性污泥上,形民絮状立体网状微观结构。固定化脱色菌－活性污泥的脱色酶活力较未经固定的活性污泥提高７０％左右。经厌氧条件下处理针织厂印染废水,色度平均去降率为７７．３％,ＣＯＤＣｒ平均去除率为６５．１％。     

基于溶解氧和缺氧时长调控的间歇曝气策略对短程硝化脱氮工艺的影响

短程硝化的实现可推动能源节约型脱氮工艺的应用。通过阐述间歇曝气策略实现短程硝化的机理,分析了应用间歇曝气策略实例中的运行参数,总结了DO协同缺氧时长分别在单独短程硝化工艺、短程硝化-反硝化(PN/D)工艺以及短程硝化-厌氧氨氧化(PN/A)工艺中的影响效果,如对功能菌活性和系统脱氮效率的影响;提出了以功能菌种、污泥存在形式等影响途径作为依据,基于DO协同缺氧时长的调控策略,并对各脱氮工艺中的运行参数进行优化,以期为各工艺系统实现最佳运行效果提供参考。     

活性污泥脱水性能与电化学阻抗谱参数的关联特性

为探究FeCl₃混凝调理过程中活性污泥脱水性能与电化学阻抗谱参数的关联关系,选取北京3座污水处理厂的剩余活性污泥,研究不同调理投药量下活性污泥的毛细吸水时间(CST)、比阻(SRF)、抽滤含水率、Zeta电位、电导率以及电化学阻抗等指标的变化,通过Pearson相关性分析讨论污泥脱水性能与阻抗谱参数(d_s/f_c)的相关性,并探讨d_s/f_c预测污泥脱水性能的可行性。实验结果表明,FeCl₃调理活性污泥的较适投加量为100 mg·g^-1;超过100 mg·g^-1时,活性污泥CST、SRF、抽滤含水率基本不再下降,Zeta电位却缓慢升高;电化学阻抗Z则随着投加量的增加而持续下降,且Nyquist图中高频区半圆面积减小,这表明电子更易转移、污泥更易导电。相关性分析表明,活性污泥的脱水性能均与d_s/f_c呈显著正相关(r > 0.639,p < 0.01);3种活性污泥CST、SRF、抽滤含水率分别与d_s/f_c的线性回归结果显示它们之间呈线性关系,且线性方程斜率为正值(R² > 0.921,p < 0.01)。上述研究结果表明,活性污泥的d_s/f_c参数可以作为指示脱水性能的潜在指标。本研究结果可为污泥减量化技术提供参考。     

磁性污泥基生物炭对Pb2+的吸附性能

为克服湿法制备磁性生物炭颗粒时团聚严重、固液分离困难、热解前需消耗大量能源脱水干化的问题,本研究以市政污泥为原料,通过无溶剂法热解制备了磁性污泥基生物炭(MSBC-2),并利用SEM、FTIR、XPS、VMS和Raman等方法对产物的表面结构与特征进行了表征。基于序批实验,分析了pH、温度、背景离子强度、生物炭投加量对该吸附材料的Pb²⁺吸附性能的影响,并进行了吸附动力学、吸附等温线及吸附热力学研究。结果表明：MSBC-2的Pb²⁺去除率随pH及温度的升高而升高,pH>4后去除率基本不变,离子强度对Pb²⁺去除率基本无影响。MSBC-2对Pb²⁺的吸附行为符合准二级动力学模型及Langmuir模型,表明吸附过程的限速步骤为化学反应,吸附为单分子层吸附;MSBC-2的反应速率常数k₂是未改性生物炭的4.1倍,25 ℃时最大理论吸附容量为113.36 mg·g⁻¹,高于大多数湿法制备的磁性生物炭;该吸附过程非自发、吸热且熵增过程;MSBC-2对Pb²⁺的吸附机理主要包括表面络合、离子交换和物理吸附。     

气泡尺寸对清洗固体表面油脂及颗粒污染物的影响

为明确气泡清洗技术在罐底油泥清洗中的应用情况,考察了气泡尺寸差异对固体表面清洗效果的影响。搭建了玻璃表面油污气泡清洗可视化实验装置,并设计了气泡发生器。该发生器可通过调节气液比产生多种尺寸分布的气泡。实验中产生的气泡直径分布于80~1 200 μm。研究了气泡尺寸、清洗时间、距离和角度等参数对清洗效果的影响,结果表明,在液体流量为2.5 L·min⁻¹条件下,清洗去除率随气泡尺寸的增大而提高,气泡的平均直径为800 μm时的清洗效果最好,能够将去除率从用水清洗的4.5%提高到68.3%,且当基底与水流方向为45°时的清洗去除率高于垂直或平行放置。上述结果说明,气泡撞击和破裂产生的水射流和涡流冲刷作用是主要的清洗机制。本研究结果可为高效处理油泥污染问题提供理论和实践参考,为罐底油泥清洗开拓新的解决路径。     

热解终温对含油污泥三相产物特性的影响

为实现含油污泥的资源化利用,以罐底油泥为研究对象并以油回收率为考核指标,对热解终温对油泥三相产物的影响进行了研究。结果表明,最佳热解条件是：升温速率为10 ℃·min⁻¹、载气中最佳氧气体积分数为4.2%。在400~800 ℃范围内,随着温度的升高,回收的热解油产率由16.43%提升至21.46%,后又降至14.15%;热解气产率由9.12%提升到了27.87%,热解残渣中可回收组分含量由39.1%降至16.5%。热解油中主要为轻质组分,油的品质较高;热解气中主要成分为CO₂和CO,且温度越高可燃气比例越高。对热解残渣进行电镜分析发现,渣体表面没有结焦现象,残渣表现出良好的吸附性能。本研究可为含油污泥热解处理资源化提供参考。