湿法净化黑烟中添加剂对炭黑沉降性能的影响

湿法净化黑烟中炭黑颗粒物的关键在于降低吸收液的表面张力并以高性能絮凝剂使其从溶液中絮凝、沉降以利于分离。选用十六烷基三甲基溴化胺(CTAB)为主要表面活性剂,使之与十二烷基苯磺酸钠(SDBS)和月桂醇聚氧乙烯(9)醚(AEO-9)进行复配实验,研究了复配液的表面张力,再向最低表面张力的复配表面活性剂溶液中投加絮凝剂聚合氯化铝(PAC)和聚丙烯酰胺(PAM),探讨絮凝剂的添加对黑烟颗粒沉降和絮凝的影响.实验结果表明:同时添加表面活性剂CTAB,SDBS和PAC,并使之浓度分别为0.5 mmol/L,0.4 mmol/L和200 mg/L时,炭黑颗粒的沉降效果最好,沉降率高达94%,且絮凝体较大,沉降时间仅为2 min。     

生物通风技术修复柴油污染土壤的土柱模拟实验

生物通风技术是将土壤气相抽提和生物降解结合起来的原位强迫氧化降解方法,对于修复因地下储油罐泄漏引起的土壤污染具有广阔的应用前景。通过室内土柱模拟柴油泄漏污染土壤,分析了不同历时残余总石油烃(total pe-troleum hydrocarbon,TPH)的平衡分布规律以及土壤中不同深度柴油量、总柴油量的变化。结果表明:(1)各柱残余TPH剖面分布差异的原因受土柱的初始装填情况的影响较大;(2)残余TPH平衡分布曲线呈双峰型的土柱,柴油的去除主要以挥发作用及生物降解作用为主;(3)挥发作用主要是由通风孔隙体积数及土壤含水率来影响的;重力作用则主要是由初始油浓度、土壤含水率、C∶N∶P影响的;除通风方式外,其余4个因素都对生物降解作用有影响;(4)初始油浓度较大,土壤含水率较小的柱8和柱11,生物降解作用最明显,柴油去除效果最好。该成果可为生物通风过程的强化提供理论依据。     

利用餐饮业废油脂制造生物柴油

世界的石油产量将会逐渐减少,石化柴油燃烧后所排放的废气是造成的城市空气污染的主要原因,生物柴油是石化柴油很好的替代能源,文章介绍了国外废油脂处理利用和甸餐饮业废油脂的概况,提出了利用餐饮业废油脂制造生物柴油的方法和工艺流程,并讨论了利用餐饮业废油脂制造生物柴油的几个问题。     

深圳市纯电动泥头车减污降碳协同效益评价研究

新能源汽车替代传统燃油车是减缓能源与环境压力并如期实现“双碳”目标的重要途径,但在重型车辆、工程车等领域推广较为缓慢.深圳市自2019年开始推广使用纯电动泥头车,并计划到2025年新能源环卫、泥头车数量达到8000辆.为深入探究纯电动泥头车替代柴油泥头车所产生的减污降碳协同效益,本研究基于一手调研数据,采用生命周期评价方法并结合GREET模型,对比分析了两类泥头车在燃料周期、车辆周期和配套设施周期3个周期内的能耗、主要空气污染物及碳排放情况.结果表明,纯电动泥头车全生命周期内能耗较柴油泥头车可减少36.2%,主要污染物如NO_x、SO₂、VOC和PM_2.5降幅分别达81.3%、37.8%、29.0%和25.9%;温室气体(GHGs)排放强度减少14.4%,基准情境下2030年和2050年推广纯电动泥头车GHGs累计减排量分别为71.4万t和258.5万t.尽管节能减排效果显著,但其初始购置和售后维保成本过高是制约其推广的最主要因素,通过降低车辆及电池生产制造成本、提高充换电设施数量及售后维保能力等有望加快泥头车纯电动化.     

废塑料生产汽柴油技术分析与应用中的误区

从废塑料生产汽柴油技术的工艺流程入手，对该项技术中存在的一些问题进行了分析，内容涉及原料来源及范围，裂化反应条件，传热与除焦，油品质量及收率，新形成的污染和经济效益评估等；指出了此项技术在应用中存在的误区。     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

催化裂化废水萃取脱酚预处理研究

选用焦化粗柴油为萃取剂,对催化裂化含酚废水进行脱酚预处理,结果表明,最佳萃取条件为：ｐＨ７．０－８．５,温度１５－４０℃,油水体系比１．７－２．１,理论萃取级数４－７级。在上述条件下,出水酚质量浓度为５０ｍｇ／Ｌ。萃取后的粗柴油用于炼油厂加氢精制装置。     

管式电除尘器"伞形罩"结构特性研究

在高温、高湿窑炉烟气条件下,采用立式管式电除尘器“伞形罩”结构,能够解决其清灰不力、二次扬尘、除尘效率不稳定等问题。本研究了“伞形罩”结构的除尘机理及效率及清灰力度影响因素、抑制二次扬尘机制。研究结果表明,“伞形罩”结构除尘效率因集尘表面积的增加而提高;应用支铁框架式振打方式,振打强度明显加强;其分流机制能有效地抑制二次扬尘：从而为“伞形罩”结构的优化设计提供了依据。     

典型可燃物燃烧烟尘物化特性差异性研究

开展对典型可燃物燃烧烟尘的物化特性差异性研究,是全面了解烟尘信息的基础.基于可控条件下的燃烧试验,对典型可燃物燃烧烟尘物理特性和化学组分进行了分析.通过对比分析汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘及柴油烟尘和正庚烷烟尘的透射电镜图片,对透射电镜图的紧凑性、复杂性及灰度值进行了深入分析,探讨了燃烧烟尘的物理差异性.利用固相微萃取-气质联用技术(SPME-GC-MS),对汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘化学组分进行了分析和对比.通过燃烧烟尘的特征物质组分的分析,得到3种燃烧烟尘在特征物质的分布和出峰时间等方面的差异性.这些差异性可作为对烟尘来源及燃烧条件等因素判别的依据.     

pH-dependent leaching behaviour and other performance properties of cement-treated mixed contaminated soil

Portland cement has been widely used for stabilisation/solidification (S/S) treatment of contaminated soils. However, there is a dearth of literature on pH-dependent leaching of contaminants from cement-treated soils. This study investigates the leachability of Cu, Pb, Ni, Zn and total petroleum hydrocarbons (TPH) from a mixed contaminated soil. A sandy soil was spiked with 3000 mg/kg each of Cd, Cu, Pb, Ni and Zn, and 10,000 mg/kg of diesel, and treated with ordinary Portland cement (CEM I). Four different binder dosages, 5%, 10%, 15% and 20% (m/m) and different water contents ranging from 13%-19% dry weight were used in order to find a safe operating envelope for the treatment process. The pH-dependent leaching behaviour of the treated soil was monitored over an 84-day period using a 3-point acid neutralisation capacity (ANC) test. The monolithic leaching test was also conducted. Geotechnical properties such as unconfined compressive strength (UCS), hydraulic conductivity and porosity were assessed over time. The treated soils recorded lower leachate concentrations of Ni and Zn compared to the untreated soil at the same pH depending on binder dosage. The binder had problems with Pb stabilisation and TPH leachability was independent of pH and binder dosage. The hydraulic conductivity of the mixes was generally of the order, 10^-8 m/sec, while the porosity ranged from 26%-44%. The results of selected performance properties are compared with regulatory limits and the range of operating variables that lead to acceptable performance described.