基于可编辑VR实验平台的突发事件下跟随效应研究

建立了可编辑VR疏散动力学实验平台,并招募100名大学生开展地铁车厢内的虚拟实验,探究突发事件下的跟随效应。每次实验有一名实验人员和20名虚拟乘客(NPC)参与,共设置5个场景探究不同比例的运动NPC对参与者预动作行为和运动行为的影响。通过分析问卷、预动作时间、出门选择、运动距离等数据,发现在实验中存在跟随等待人群和跟随运动人群两种跟随效应,而人群的运动是更为强烈的信息,当等待和运动NPC占比从0%提升至50%,等待和运动参与者占比分别提高10%和60%。因此,在突发事件场景中,应及时对局部人群施加有效的同向引导,以提升整体疏散效率。     

水力停留时间对膜生物反应器复合工艺污水处理特性的影响

开发了厌氧-多级好氧/缺氧-膜生物反应器复合工艺,在不同水力停留时间(HRT)下,考察了系统对污染物去除效果及其膜污染的特性.结果表明,在试验选定的HRT范围内,系统对TN和TP的去除率随着HRT的降低而升高,当HRT为8.70、6.96、4.97 h时,系统对TN和TP的平均去除率分别为73.15%、79.76%、81.98%和67.79%、80.99%、92.16%.但是,较低HRT条件下膜通量较高,会加剧膜污染进程.解决这一问题的措施是增加膜组件个数,从而在不提高膜通量的情况下使系统保持较低的HRT,保证系统高效稳定的污染物去除效果.     

不同墩高下连续刚构桥抗震性能分析

以某大跨连续高墩刚构桥为依托,采用Midas/civil软件建立仿真模型,通过时程分析方法研究双肢薄壁墩参数在地震响应下对高墩连续刚构桥抗震性能的影响.以桥墩高度为主要参数,以模型阵型频率、桥墩墩顶、墩底位移及内力变化三个方面对其抗震性能进行评价.研究结果表明,随着其中一个桥墩高度的增加,桥梁频率不断减小,矮墩墩底及矮...     

Immunotoxicity of bisphenol a to Carassius auratus Lymphocytes and macrophages following in vitro exposure

Bisphenol A （BPA） is the monomer component of polycarbonate plastics and classified as an endocrine disrupting chemical （EDC）. The reproductive toxicity of BPA has been extensively studied in mammals; however, relatively little information is available on the immunotoxic responses of fish to BPA. In this study, we investigated the effects of BPA on the immune functions of lymphocytes and macrophages in Carassius auratus. The effects of BPA were compared with those of two natural steroid hormones, estradiol and hydrocortisone. Proliferation of the two types of cells in response to PHA was measured using colorimetric MTT assay. Macrophage respiratory burst stimulated by Con A was measured using chemiluminescence assay. Results showed that BPA （0.054-5.4 mg/L）, estradiol （0.0002-2.0 mg/L） and hydrocortisone （5-50 mg/L） significantly induced Carassius auratus lymphocyte proliferation while higher doses of hydrocortisone （500-5000 mg/L） appeared to be inhibitory. BPA （0.005-50 mg/L）, estradiol （0.005-800 mg/L） and hydrocortisone （0.005-500 mg/L） markedly enhanced macrophage proliferation, whereas higher doses of BPA （500-1000 mg/L） appeared to inhibit cell proliferation. Furthermore, higher dosage of BPA （50 mg/L） and hydrocortisone （50 and 500 mg/L） suppressed the macrophages respiratory burst while estradiol is stimulative all the doses tested （0.05-500 mg/L）. In conclusion, BPA could have immunotoxicity to Carassius auratus and functional changes of lymphocyte and macrophage in Carassius auratus may be different between low and high dosages.     

Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

Leaching of styrene and other aromatic compounds in drinking water from PS bottles

Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene （PS） bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as ＂purge and trap＂ and analysed by gas chromatograph-mass spectrometer （GC/MS）. Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

Imazaquin degradation and metabolism in a sandy loam soil amended with farm litters

Irnazaquin applied in legume crops has a long residual time in soil, which often impacts safety of the susceptible crops. To increase safety of imazaquin application, two composted litters, bovine manure （BM） and chicken manure （CM）, were used to determine their effects on imazaquin environmental behavior by incorporating each kind of manure into the tested sandy loam soil at 10% （w/w）. The degradation of imazaquin in BM- and CM-amended soil was about 2.4 and 1.5 times, respectively, faster than that in unamended soil. The half-lives of imazaquin in BM-amended soil varied between 6.7 and 15.4 d over the temperature range of 20 to 40℃, and the degradation rate constant （k） increased by a factor of about 1.5 for every 10℃ change. Higher mix ratio did not significantly increase the degradation, and the optimal active degradation of imazaquin was observed approximately at the mix ratio of 10：1 of soil to BM. The different moisture levels had negligible effect on imazaquin degradation. In both unamended and BM-amended treatments, two metabolites were observed at 5, 10 and 30 d after treatment. One metabolite at retention time （RT） of 8.4 rain was identified as 2-（4- hydroxyl-5-oxo-2-imidazolin-2-yl） quinoline acid, originating from the loss of isopropyl group and hydroxylation at the 4-position of imidazolinone ring. The other at RT of 12.9 rain was identified as quinoline-2,3-dicarboxylic anhydride, resulting from detachment of imidazolinone ring and the forming of dicarboxylic anhydride. This finding suggested that the addition of farm litters into soil might be a good management option since it can not only increase soil fertility but also contribute to increase safety of imazaquin application to the following susceptible crops.     

Adsorption thermodynamics and kinetic investigation of aromatic amphoteric compounds onto different polymeric adsorbents

The adsorption behavior of p-aminobenzoic acid and o-aminobenzoic acid onto the different polymeric adsorbents was systematically investigated as a function of the solution concentration and temperature.Experimental results indicated that the equilibrium adsorption data of the four polymeric adsorbents fitted well in the Freundlich isotherm.The adsorption capacity of multi-functional polymeric adsorbent NJ-99 was the highest,which might be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of aminobenzoic acid.The adsorption capacity of o-aminobenzoic acid onto any adsorbent was higher than p-aminobenzoic acid.Thermodynamic studies suggested the exothermic,spontaneous physical adsorption process.Adsorption kinetics results showed that the adsorption followed the pseudo-second-order kinetics model and the intraparticle mass transfer process was the rate-controlling step.