延边地区水稻稳产高产施肥体系的探讨

采用二次饱和D-最优设计,建立了有机肥、氮肥、磷肥和钾肥配合施用对水稻产量影响的数学模型.研究表明有机肥施用量的过多或过少均使水稻产量下降,化肥的施用也有相似的影响;有机肥与氮肥、磷肥、钾肥只有施用量在适宜的范围内,交互作用较大,产量最高.提出了延边地区水稻获得稳产、高产的施肥体系.     

不同天气型下武汉城市圈PM2.5污染及大气层结特征分析

利用2015—2019年PM_2.5和气象要素观测资料、NCEP和ERA5再分析资料,分析不同天气型下武汉城市圈PM_2.5区域污染时空分布、天气尺度环流和大气层结特征.结果表明,城市圈污染以武汉为中心,多为轻度-中度污染,西部重于东部.造成武汉城市圈区域污染增长的天气形势包括4类,分别为冷高压底前部型、高压后部型、均压场型和低压倒槽型.4类污染天气型均有较低的混合层高度和地表通风系数,且边界层存在弱下沉运动和逆温,抑制污染垂直扩散.但气象要素影响PM_2.5污染的机理各异：冷高压底前部型主要为大气压梯度引导偏北大风带来污染物远程输送,边界层冷平流导致低温、锋面逆温和浅薄高湿层(65%～80%),强输入性污染配合吸湿性累积增长造成严重污染,逆温厚度对PM_2.5增幅作用明显;低压倒槽型东南风输入污染弱,但高温、低压引起气流辐合导致本地污染汇积,边界层暖平流带来平流逆温和深厚湿层(1000～750 hPa),逆温层底高偏低、厚度偏厚,促进污染物在近地面吸湿增长;高压后部和均压场型均为浅薄湿层(1000～975...     

核化危害源项反演技术现状及研究展望

源项反演对缓解和遏制核化危害源、精准预测核化危害时空传输和扩散情况、辅助作战行动和保障决策等具有十分重要的意义.本文从源项反演应用平台和源项反演关键算法(包括欧拉方法、拉格朗日方法、深度学习等)两个方面,对国内外核化危害源项反演技术的现状和二者间的差距进行了总结与分析.研究指出,利用深度学习提高反演精度和速率、从单污染...     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

循环载荷下煤裂隙演化试验研究

为了研究循环载荷下的煤体裂隙演化特征,在不同应力水平和不同频率条件下分别进行煤样破坏力学及声发射试验。结果表明:应力-应变曲线呈疏-密-疏的变化特征,对应的振铃数柱状图呈U型;上限应力点的应变值、累积能量、撞击计数均随循环次数增加而上升,曲线呈倒S型;煤裂隙演化经历了原始裂隙闭合、新生裂隙稳定发育和裂纹贯穿破坏等3个不同阶段;循环载荷的应力水平和加载频率对煤体疲劳寿命的影响具有差异性,对煤体裂隙演化和破坏模式均有明显影响。     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

浅谈再生资源服务中心助力两型社会建设

围绕武汉城市圈“两型社会”建设综合配套改革试验区的现代社会组织体制建立过程中的热点问题,阐述了现代社会组织暨再生资源服务中心的基本特征;强调了以民主促民生的制度建设的必要性：分析了现代社会组织助力“两型社会”建设的可行性;概述了以华中资源循环利用服务中心为例的创新型现代社会组织市场化运作公共服务项目的工作思路。     

重庆主城区秋冬季逆温对空气质量影响的观测分析

2013年9—11月利用RPG-HATPRO地基多通道微波辐射计对重庆主城区大气进行连续探测,统计了大气逆温情况,并对典型重污染天气下大气逆温与空气质量状况进行综合分析。结果表明,逆温出现的频率为63.3%,基本为接地逆温类型,逆温层厚度为953 m,逆温强度为0.3℃/hm;逆温的存在为气溶胶的积聚和凝聚创造了有利条件。     

Volatilization of 1,2‐dibromo‐3‐chloropropane (DBCP) from soils

Abstract

The volatilization of DBCP from soils, as affected by the soil characteristics and application techniques, was studied in a laboratory experiment. The volatilization rate of DBCP applied in water was higher from sandy and silty loam soils than from clay soil. Water added after DBCP application acted as a soil cover, decreasing the volatilization rate. The results obtained with DBCP application in hexane to air‐dry soils, indicate that adsorption could be an important factor in reducing the volatilization losses.

Diffusion coefficients were calculated from the volatilization parameters, by using a simplified relationship between volatilization losses and diffusion through soil.     

基于循环经济的煤炭企业生产模式研究

阐述了循环经济的内涵,分析了煤炭企业传统生产模式存在的问题,指出煤炭企业实施循环经济生产模式的必要性,提出我国煤炭企业建立循环经济生产模式的基本思路。即建立以煤炭企业为中心的小循环生产模式,以大型煤炭生产基地为中心的中循环生产模式和以社会为中心的大循环生产模式,对我国煤炭企业实施循环经济的生产模式具有指导意义。