Modification of Evacuation Time Computational Model for Stadium Crowd Risk Analysis

The complexity of the evacuation process is associated with the flow of occupants through various egresses available inside the building. Several methods and algorithms are now available to analyse the problem related to evacuation. In the present paper an algorithm, evacuation discrete time model (EDTM) has been presented to analyse the building egress evacuation time problem with previous works. The algorithm is based on the crowd flow theory and uses discrete computational approach to identify various widths of egresses available for movement of the people, which is more accurate and practicable because the crowd flow rate is variable. The developed model has been compared with an existing model to show the capabilities of the developed algorithm. A case of stadium stand egress is chose for the validity of EDTM, and a comparison of EDTM, previous model and computer simulation indicates that both the EDTM and the simulation curves were found to give better predictions than the previous model. Based upon the comparison analysis with stranded crowd and evacuation crowd at a certain time, EDTM shows great value in explaining the cause of stampede-trampling and crushing incident of egress or narrow passage zone.     

Remediation of DDT-Contaminated Water and Soil by Using Pretreated Iron Byproducts from the Automotive Industry

The objective of this study was to quantify the effectiveness of different pretreated iron byproducts from the automotive industry to degrade DDT [(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane] in aqueous solutions and soil slurry. Iron byproducts from automotive manufacturing were pretreated by three different methods (heating, solvent and 0.5N HCl acid washing) prior to experimentation. All pretreated irons were used at 5% (wt v^{? 1}) to treat 0.014 mM (5 mgL^{? 1}) of DDT in aqueous solution. Among the pretreated irons, acid pretreated iron results in the fastest destruction rates, with a pseudo first-order degradation rate of 0.364 d^{? 1}. By lowering the pH of the DDT aqueous solution from 9 to 3, destruction kinetic rates increase more than 20%. In addition, when DDT-contaminated soil slurry (3.54 mg kg^{? 1}) was incubated with 5% (wt v^{? 1}) acid-pretreated iron, more than 90% destruction of DDT was observed within 8 weeks. Moreover, DDT destruction kinetics were enhanced when Fe(II), Fe(III) or Al(III) sulfate salts were added to the soil slurry, with the following order of destruction kinetics: Al(III) sulfate > Fe(III) sulfate > Fe(II) sulfate. These results provide proof-of concept that inexpensive iron byproducts of the automotive industry can be used to remediate DDT-contaminated water and soil.     

Kresoxim methyl dissipation kinetics and its residue effect on soil extra-cellular and intra-cellular enzymatic activity in four different soils of India

The rate of degradation of kresoxim methyl and its effect on soil extra-cellular (acid phosphatase, alkaline phosphatase and β-glucosidase) and intra-cellular (dehydrogenase) enzymes were explored in four different soils of India. In all the tested soils, the degradation rate was faster at the beginning, which slowed down with time indicating a non-linear pattern of degradation. Rate of degradation in black soil was fastest followed by saline, brown and red soils, respectively and followed 1st or 1st + 1st order kinetics with half-life ranging between 1–6 days for natural soil and 1–19 days for sterile soils. The rate of degradation in natural against sterilized soils suggests that microbial degradation might be the major pathway of residue dissipation. Although small changes in enzyme activities were observed, kresoxim methyl did not have any significant deleterious effect on the enzymatic activity of the various test soils in long run. Simple correlation studies between degradation percentage and individual enzyme activities did not establish any significant relationships. The pattern and change of enzyme activity was primarily due to the effect of the incubation period rather than the effect of kresoxim methyl itself.     

高效石油烃降解菌SKD-1的分离、筛选及其降解性能

从孤岛油田石油污染土壤中分离到一株高效石油降解菌,命名为SKD-1。该菌株菌落表面湿润光滑、边缘整齐、圆形、不透明、乳黄色,能够利用葡萄糖和淀粉作为其生长的碳源和能源,其最适生长环境为碱性（pH8-10）,在分别以正十六烷烃和原油为惟一碳源,温度为30℃,摇床（180r／min）培养的条件下,菌株SKD-1的降解率分别为66．1％和36．9％。16SrRNA基因序列分析表明,菌株SKD-1与不动杆菌AcinetobactercalcoaceticusSY-1同源性达99％。结合菌株SKD．1菌落形态、理化性质以及系统发育分析,可以鉴定菌株SKD-1属于不动杆菌属（Acinetobactersp．）,序列登录号为AB774229。     

CaCl2高温热处理垃圾焚烧飞灰中重金属的挥发特性

以深圳市某垃圾焚烧厂飞灰为原料,采用高温管式电阻炉,研究了在0．6L／minN,气氛下,CaCl2在不同添加量、处理温度及处理时间下对飞灰中重金属Pb、Cd、Zn和Cu挥发特性的影响,并对收集到的二次飞灰进行成分及物相分析。结果显示,X射线衍射仪和EDS分析表明,二次飞灰主要是由NaCl、KCl和部分SiCl4组成,zn主要以K2ZnCl4形式挥发,而Pb则主要以氧化物PbO和Pb3SiO5的形式挥发。最终得到CaCl2热处理飞灰的最佳二次气化条件：以0．6L／minN,为载气,添加14wt％的CaCl2,在1100℃高温下处理2．5h。经CaCl2热处理后的剩余飞灰,其浸出毒性达到了《生活垃圾填埋场污染控制标准》要求。     

CS-Fe和CS-Fe/Ni的制备及其用于去除钴离子

以氯化铁为铁源,硼氢化钠为还原剂,壳聚糖为稳定剂,采用液相还原法制备壳聚糖稳定纳米铁（CS-Fe）;并以氯化铁为铁源,硫酸镍为镍源,硼氢化钠为还原剂,壳聚糖为稳定剂,采用液相还原共沉淀法制备壳聚糖稳定纳米铁镍（CS-Fe/Ni）。通过SEM、EDS、XRD、FT-IR等表征手段,对所制备的CS-Fe和CS-Fe/Ni的形貌及微观结构进行表征,并以Co²⁺为目标去除物评价CS-Fe和CS-Fe/Ni的反应活性。初步研究表明,制成的CS-Fe含有单质纳米铁,颗粒多数以30~90 nm球形颗粒为主;而CS-Fe/Ni材料中含有纳米铁镍,颗粒多数以30~60 nm球形颗粒为主;在相同的实验条件下,反应60 min,CS-Fe/Ni对Co²⁺的去除率高达100%,但是CS-Fe仅为88%,即CS-Fe/Ni对Co²⁺的去除率比CS-Fe高。     

四环素高效降解酵母菌Trichosporon mycotoxinivoransXPY-10降解特性

Trichosporon mycotoxinivorans XPY-10是一株分离自抗生素制药厂的高效四环素降解酵母菌。为了建立该菌株降解四环素的适宜条件,分别研究了碳源、有机氮源、金属离子等营养物质及初始底物浓度、接种量、pH、温度、装液量、摇床转速等理化因素对菌体生长及四环素降解效率的影响。结果表明,菌株XPY-10生长的最适碳源和氮源分别为蔗糖和蛋白胨。在含有0.05% FeSO₄的培养基中,菌株XPY-10降解四环素的适宜条件为：接种量2%,pH 8,温度34℃,装液量100 mL（250 mL 三角瓶）,摇床转速180 r/min。在此条件下,菌株XPY-10在7 d内对初始浓度为600 mg/L的四环素降解率为83.63%。本菌株对养殖废水及制药废水中四环素的污染治理有一定的应用前景。     

复合人工湿地对水源地库区水质净化效果分析

宁波皎口水库是水源地,皎口复合人工湿地位于皎口水库的进水口,采用多种水流方式复合,对提高水库水质及保障饮用水安全具有积极的作用。为了探明人工湿地在微污染地区的应用价值,对人工湿地水源地水质净化效能进行了研究。在1年的监测调查调查中,研究探讨了复合人工湿地及其不同模块在不同季节的净化效果。结果表明,该人工湿地对总氮和总磷的平均去除率分别可达到为34.7%和42.6%,对COD和TOC的平均去除率可达到28.5%和21.6%。COD、NH₄⁺-N和总磷出水平均浓度分别为2.193、0.215和0.021 mg/L,均达到 《地表水环境质量标准》（GB3838-2002）Ⅱ类水质标准。在比较不同模块去除效果方面,提出了具有填料的生态滤池更有利于磷的去除,而对于氮、有机物等营养元素,复合多级强化生物膜系统及营养盐集约式植物资源化系统则有较好的去除效果。     

CaCl2高温热处理垃圾焚烧飞灰中重金属的挥发特性

以深圳市某垃圾焚烧厂飞灰为原料,采用高温管式电阻炉,研究了在0.6 L/min N₂气氛下,CaCl₂在不同添加量、处理温度及处理时间下对飞灰中重金属Pb、Cd、Zn和Cu挥发特性的影响,并对收集到的二次飞灰进行成分及物相分析。结果显示,X射线衍射仪和EDS分析表明,二次飞灰主要是由NaCl、KCl和部分SiCl₄组成,Zn主要以K₂ZnCl₄形式挥发,而Pb则主要以氧化物PbO和Pb₃SiO₅的形式挥发。最终得到CaCl₂热处理飞灰的最佳二次气化条件:以0.6 L/min N₂为载气,添加14 wt%的CaCl₂,在1 100℃高温下处理2.5 h。经CaCl₂热处理后的剩余飞灰,其浸出毒性达到了《生活垃圾填埋场污染控制标准》要求。     

Growth and photosynthetic responses to copper in wild grapevine

The present study evaluates the tolerance and accumulation potential of Vitis vinifera ssp. sylvestris under moderate and high external Cu levels. A greenhouse experiment was conducted in order to investigate the effects of a range of external Cu concentrations (0–23 mmol L⁻¹) on growth and photosynthetic performance by measuring gas exchange, chlorophyll fluorescence parameters and photosynthetic pigments. We also measured the total copper, nitrogen, phosphorus, sulphur, calcium, magnesium, iron, potassium and sodium concentrations in the plant tissues. All the experimental plants survived even with external Cu concentrations as high as 23 mmol L⁻¹ (1500 mg Cu L⁻¹), although the excess of metal resulted in a biomass reduction of 35%. The effects of Cu on growth were linked to a reduction in net photosynthesis, which may be related to the effect of the high concentration of the metal on photosynthetic electron transport. V. vinifera ssp. sylvestris survived with leaf Cu concentrations as high as 80 mg kg⁻¹ DW and growth parameters were unaffected by leaf tissue concentrations of 35 mg Cu kg⁻¹ DW. The results of our study indicate that plants of V. vinifera ssp. sylvestris from the studied population are more tolerant to Cu than the commercial varieties of grapevine that have been studied in the literature, and could constitute a basis for the genetic improvement of Cu tolerance in grapevine.