IS IT REALISTIC TO DEFINE A 100-YEAR DROUGHT FOR WATER MANAGEMENT?1

ABSTRACT: The concept of recurrence interval has been used for years in engineering designs. Can the same concept be applied to the drought analysis? This paper uses the plotting position method to define drought of various recurrence intervals based on stream-flow data. The method of truncation level was applied to the same data to examine the defined drought. Based on the method of truncation level, drought duration and its corresponding flow deficit were investigated. Eighteen flow gage stations from the Scioto River Basin in Ohio were selected for the study. The results show that flows of 100-year droughts using the plotting position method are practically nil. On the other hand, flows of droughts using the truncation method are gradually decreasing with an increase in truncation level, where flows of 95 percent are approximately equal to those of two-year droughts defined by the plotting position. It is also shown that there is a strung correlation between drought duration and deficit.     

Residence and place image

Data are presented for a particular population on its perception of English and Welsh local authority areas in terms of desirability for residence. The method employed permits a distinction between positive and negative judgements as well as a measure of the differing degree to which areas figure in the mind at all. It is established that the areas are seen in terms of a sharply differentiated hierarchy of preference and that there is considerable variation in the extent to which areas are “visible”. In aggregate negative judgements predominate and the most frequently expressed attitude is strong dislike. Places in the south‐west are popular as are some places in the north. London Boroughs are unpopular although in varying degrees. The most favoured place is Cornwall and the least favoured is Wolverhampton. It is argued that perceptions studied in the “direct” way used here are important to complement those employing an “oblique” method in which criteria of choice are assumed or established by social survey and then used to create a profile of preference against which places can be measured and ranked.     

山东地震台网数字与模拟记录资料对比分析

对山东数字化台网荣成、烟台、莱阳、潍坊、苍山和大山台记录的垂直向P波初动半振幅、S波与P波的振幅比、P波、S波的卓越周期及振动持续时间比等参数进行了测算,并将之与同台址相应的模拟记录进行了对比,得出分析结果为:1 数字记录的速度震级较模拟记录的位移震级平均偏小0 11,数字记录的仿真震级与模拟记录的位移震级基本一致。2 数字记录的地震波参数与模拟记录一致性较好,没有明显差异。     

HYDROLOGIC MODELING WITH REMOTELY SENSED DATABASES1

ABSTRACT: An integrated remotely sensed database was used as the basis for a hydrologic and sediment transport modeling effort for an agricultural area of western Puerto Rico. Classified spectral images of airborne radiance data provided ground cover information and were used in conjunction with topographic and soils data to guide model construction and provide input to the water balance and sediment yield simulations. Runoff and sediment discharge from hydrologically homogeneous regions were routed through the drainage network and combined at the basin outlet. The model was used to simulate four years of observed sediment discharge from the basin. Relative contributions to the total sediment yield of forested and agricultural areas were determined and compared.     

DIGITAL SIMULATION OF THE EFFECT OF THERMAL DISCHARGE ON STREAM WATER QUALITY1

A modified transient version of the Streeter-Phelps model along with the energy balance equation is employed to analyze the effects of waste heat discharge from power plants on stream water quality. Analysis is also made to examine the effects of the upstream water quality and stream velocity on the downstream DO concentration level. The resulting coupled nonlinear hyperbolic partial differential equations representing the energy, BOD and DO concentrations are solved by the method of characteristics and simulated on a digital computer. Final numerical results indicate that the allowable quantity of thermal discharge does heavily depend on the upstream quality.     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

百口泉地下水电导率与溶解性总固体相关性讨论

由于溶解性总固体的测定较为复杂,平行性、稳定性差,而电导率的测定简便、迅速,重现性、稳定性好,若二者相关关系显著,可通过测定电导率,按一定的比例推算水中溶解性总固体的量。通过对百口泉地下水的溶解性总固体与电导率的相关性的监测、分析,经统计检验,线性关系显著,其比值范围在065～076,均值为07,即百口泉地下水的电导率1μs/cm相当于070mg/L的溶解性总固体。     

DEVELOPMENT OF A BASIN GEOMORPHIC INFORMATION SYSTEM USING A TIN-DEM DATA STRUCTURE1

ABSTRACT: To make a distributed rainfall-runoff model, it is very important to build a model of topographic surface of a basin which takes account of the direction of water flow. In this paper, a geographic information system in hydrologic modeling, the BGIS (Basin Geomorphic Information Systems) are presented for modeling a river basin using a TIN-DEM (Triangulated Irregular Network - Digital Elevation Model) data structure. The BGIS have two core systems, which are the TIN-DEM generating system and the topographic analysis system. In the TIN-DEM generating system, landscapes are modeled as a set of contiguous non-overlapping terangular facets whose vertices are made up of points on a regular grid DEM and on river segments. These triangular facets are subdivided, if needed, so that each of them has only one side through which water flows out. The TIN-DEM generating system is made up of four modules, (1) a module for generating triangles from a grid DEM, (2) a module for getting rid of pits, (3) a module for joining discontinuous valley segments to a channel network, (4) a module for subdividing triangular facets. In the topographic analysis system, using datasets processed with the TIN-DEM generating system, a watershed source area for any segments in a stream network are delineated automatically, and topographic attributes of slopes, aspects, flow path lengths and upslope contributing areas are computed.