Optimization of novel pyrazolium ionic liquid catalysts for transesterification of bitter apple oil

In the present study, 4 different functionalized pyrazoliums based on sulfoalkyl-pyrazolium hydrogensulfate and alkylsulfo-alakylpyrazolium hydrogensulfate were explored to catalyze biodiesel production from bitter apple oil (BAO). The results demonstrated that a longer chains catalyst of 2-(4-sulfobutyl) pyrazolium hydrogensulfate (SBPHSO₄) exhibited the highest catalytic activity, which is attributed to its strong acidity. The highest yield of esters was up to 89.5% when the reaction was carried out under the conditions of 5.2 wt% of SBPHSO₄, molar ratio of methanol to BAO of 15:1, 170 °C, and 800 rpm for 6 h. These results demonstrated that ionic liquids offer a promising new type of pyrazolium catalyst for biodiesel production. The use of clean ionic liquids in preparing clean biodiesel could solve the drawbacks associated with using the old conventional catalysts and might be employed as an efficient catalyst for such relevance.     

Leaching behavior of copper from waste printed circuit boards with Brønsted acidic ionic liquid

In this work, a Brønsted acidic ionic liquid, 1-butyl-3-methyl-imidazolium hydrogen sulfate ([bmim]HSO₄), was used to leach copper from waste printed circuit boards (WPCBs, mounted with electronic components) for the first time, and the leaching behavior of copper was discussed in detail. The results showed that after the pre-treatment, the metal distributions were different with the particle size: Cu, Zn and Al increased with the increasing particle size; while Ni, Sn and Pb were in the contrary. And the particle size has significant influence on copper leaching rate. Copper leaching rate was higher than 99%, almost 100%, when 1 g WPCBs powder was leached under the optimum conditions: particle size of 0.1–0.25 mm, 25 mL 80% (v/v) ionic liquid, 10 mL 30% hydrogen peroxide, solid/liquid ratio of 1/25, 70 °C and 2 h. Copper leaching by [bmim]HSO₄ can be modeled with the shrinking core model, controlled by diffusion through a solid product layer, and the kinetic apparent activation energy has been calculated to be 25.36 kJ/mol.     

水中~（14）C取样与测量方法的实验研究

目前由于日本福岛核电事故,全世界高度关注核污染,14C作为影响人体健康8个主要放射性核素之一,在核电站的运行过程中随流出物大量排入周围的环境中,因此也受到人们的关注。作者在前人工作的基础上设计了一种采样及测定水中14C的分析方法,并确定出了该方法对水中碳取样效率、NaOH溶液对CO2捕集效率、CaCO3沉淀制备效率、液闪对Ca14CO3的探测效率等的最优化条件。实际测得探测下限为0.12 mBq/L。     

氟铃脲在棉花和土壤中的残留与降解行为研究

利用高效液相色谱分析方法,考查氟铃脲在棉叶及土壤上使用后的降解和残留行为,为安全施药提供依据。采用田间试验法研究氟铃脲在棉叶和土壤中的残留消解动态。氟铃脲在棉叶中的消解动态均满足一级降解动力学过程及其降解常数。按照试验要求,氟铃脲在棉籽中的最终残留均未检出,低于日本规定的最大残留限量值（0.05 mg·kg-1）。该分析方法操作简单,精密度、准确度和灵敏度都符合农药残留标准要求,适用于棉花和土壤中的氟铃脲残留测定;建议2%氟铃脲乳油在棉花上防治病害,用药次数1次,使用剂量是22.5～30.0 g·a·i·hm-2,在棉花上的安全间隔期可定为10 d。     

新疆第二代生物液体燃料原料潜力评估

我国政府高度重视生物质能的开发,第二代生物液体燃料是一种清洁可再生的生物质能源,较第一代生物质能源更容易获得,因此大力发展第二代生物液体燃料对改善我国能源结构,实现节能减排具有重要意义.本文从年净生物量大、耐干旱、耐盐碱等角度出发,选择出适合新疆发展的棉花、甜高粱及红柳三种第二代生物液体燃料原料植物,并在了解新疆自然条件及国家和新疆政策法规、规划的基础上,预测到2030年三种生物质能源作物生物量,为相关部门制定生物质能源政策提供参考.     

几种结晶条件对氧化镁脱硫副产物回收的影响

为了优化脱硫液中硫酸镁结晶回收的控制条件,将经过处理的现场脱硫液放入5L夹套反应器中进行冷却结晶的单因素试验和正交试验,发现溶液冷却速率在7℃/h,搅拌速度为40 r/min,结晶温度为20℃,硫酸镁质量分数为34％时,一次结晶率为53％、晶体粒径0.45 mm.此条件下得到的结晶基本符合工业标准.     

全身正压生物防护服防护性能研究

为研究动力送风全身式正压生物防护服对人员的防护性能,采用标准方法检测正压生物防护服气密性和液体喷溅防护性能,连续监测穿着正压生物防护服活动时的内部正压值变化。采用微环境气溶胶密闭舱室平台,研究正压生物防护服对黏质沙雷氏菌(ATCC 8039)和phi-x174噬菌体气溶胶的整体防护性能。结果表明,正压生物防护服气密性和液体喷溅防护性能均达到气密型防护服和喷射液密防护服水平。对2种生物气溶胶的防护效率均在99.97%以上,且与送风量与环境湿度无关。正压生物防护服被人员穿着进行作业时,其内部能始终能保持大于16 Pa的正压。对该防护服防护性能的系统分析能全面评估类似防护服的整体防护性能,也为未来各类正压式防护服研发和防护性能研究提供技术参考。     

Modeling the vapor source term associated with the spill of LNG into a sump or impoundment area

The recent publication of evaluation protocols for vapor source term models and vapor dispersion models have influenced the modeling approaches that can be used for approval of new and expansion projects at LNG receiving terminals. In the past few years the scientific basis of integral vapor source term models has been questioned with growing concerns regarding their validity. In this paper, the shallow water equations (SWEs) were solved to study the characteristics of the evaporating LNG pool associated with a constant flow rate spill of LNG into a concrete sump. In the early stages of pool spreading, the leading edge thickness profile of the SWE model scales with the square root of the distance from the leading edge as the pool spreads. After the edge of the pool reaches the wall, the reflected wave forms a hydraulic jump that travels back towards the center of the pool at a speed that is considerably slower than the initial spreading of the pool. Once the hydraulic jump reaches the center, the pool assumes a nearly flat free surface for the rest of the spill. The pool spreading and the rate of evaporation from the SWEs were then compared to the solution provided by the integral model, PHAST. The two approaches were found to agree well with one another. The SWE model was also used to demonstrate the influence of an elevated spill source. With an elevated source, the LNG pool spreads faster, significantly increasing the initial rate of vaporization and peak vaporization rate. This increase in the initial rate of vaporization could lead to an increase in the vapor cloud hazard distance. The SWE model was also used to demonstrate the influence of an inclined sump floor in the shape of an inverted cone where the spilling LNG accumulates in the low vertex of the cone. Inclined sump floors can be used to significantly reduce the cumulative evaporation, making them attractive as a possible mitigation approach in cases where a containment sump is located close to a property boundary.     

液氧罐防火间距不足隐患治理技术

液氧罐与周边建（构）筑物防火间距不足的问题在新建企业中比较罕见。本文以某企业在安全验收评价时发现液氧罐防火间距不足隐患治理为例,为了预测液氧罐泄漏事故可能的事故后果,设定了液氧罐三种可能的典型泄漏事故情景,进行了泄漏事故后果计算。研究结果表明,液氧罐泄漏造成的空气中氧气浓度提高2.5%（相应约29630ppm）即可使动火作业受到影响,液氧罐泄漏事故后果影响范围较大。并在此基础上,提出了隐患治理的主要技术措施,具有实际意义。     

电晕放电与络合催化联合同时去除烟气中SO_2、NO实验研究

采用电晕放电与液相络合催化协同同时去除烟气中SO2和NO,电压、水流量、乙二胺合钴浓度、pH、SO2和NO初始浓度以及气流量对同时去除SO2和NO效率的影响进行了实验研究.结果表明:NO去除率随着放电电压、水流量、乙二胺合钴浓度、pH的增加而增加,而随SO2和NO初始浓度、烟气流量的增大而减小;SO2去除率也随放电电压,水流量的增加而增加,随烟气流量的增加而下降,但溶液pH,SO2和NO初始浓度和乙二胺合钴浓度对其影响很小.溶液中加入Mn2+和尿素能分别增强SO2和NO的去除效果.最佳条件为:电压25 kV、水流量80 L·h-1,乙二胺合钴浓度0.02 mol·L-1,烟气流量1.0 m3·h-1、尿素浓度0.02 mol·L-1,Mn2+浓度为0.02 mol·L-1时,NO和SO2去除率分别可达68%和94%,对应能量消耗分别为22.2 g·k Wh-1和75.2 g·k Wh-1.