Electrochemical study of the fungicide acibenzolar-s-methyl and its voltammetric determination in environmental samples

The electrochemical behavior of new generation fungicide acibenzolar-s-methyl (S-methyl 1,2,3-benzothiadiazole-7-carbothioate, ASM) on the hanging mercury drop electrode (HMDE) was investigated using square wave adsorptive stripping voltammetry. This method of determination is based on the irreversible reduction of ASM at the HMDE. The well-defined ASM peak was observed at ?0.4 V (vs. Ag/AgCl) in BR buffer at pH 2.2. The reduction peak current was proportional to concentration of ASM from 1.0 × 10^?8 to 6.0 × 10^?8 mol L^?1 with detection and quantification limit 3.0 × 10^?9 and 1.0 × 10^?8 mol L^?1, respectively. The applicability of the developed method for analysis of spiked samples of tap water, river water, and soil is illustrated. The effect of adsorption on the mercury electrode was studied in detail using the AC impedance method. Possible interferences with other common pesticides and heavy metal ions were examined. Clarification of the electrode mechanism was made using cyclic voltammetry (CV) technique.     

Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998–2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected for analysis and risk assessment. The levels of contaminants in the samples from the official control were below maximum limits from EU regulations with only a few exceptions in the following groups; dioxins and dioxin-like polychlorobiphenyls (PCBs) in fish-containing byproducts and dioxins in vegetable and animal fat, hydrogen cyanide in linseed, and cadmium in sunflowers. The levels of pesticides and mycotoxins in the additionally collected samples were below maximum limits. Enniatin B (ENN B) was present in all DDGS samples. The hypothetical cases of carry-over of contamination from these byproducts were designed assuming total absorption and accumulation of the ingested contaminant in meat and milk and high exposure (a byproduct formed 15–20% of the feed ration depending on the species). The risk assessment was refined based on literature data on metabolism in relevant animal species. Risk assessment of contaminants in byproducts is generally based on a worst-case approach, as data on carry-over of a contaminant are sparse. This may lead to erroneous estimation of health hazards. The presence of ENN B in all samples of DDGS indicates that potential impact of this emerging mycotoxin on feed and food safety deserves attention. A challenge for the future is to fill up gaps in toxicological databases and improve models for carry-over of contaminants.     

森林碳汇资源开发潜力定量评价与研究——以黑龙江省为例

森林碳汇资源是开展森林碳汇贸易的基础。森林碳汇潜力的定量评价,将为森林碳汇贸易提供可靠的依据。在对森林碳汇资源开发潜力的定量方法进行深入研究的基础上,以黑龙江省为案例进行潜力评价,明确了黑龙江省具有巨大的森林碳汇增量潜力,提出了进一步发展森林碳汇贸易及构建森林碳汇交易市场的可行性。     

基于排队论的城市垃圾箱最佳间距研究

针对城市垃圾箱最佳间距的研究不够精细的现状,本文通过建立排队论模型得到了可供不同城市参考的城市垃圾箱最佳间距参数表。通过对部分城市街道的垃圾箱摆放间距情况进行实地调查,运用层次分析法将影响垃圾箱间距分布的多重因素转化为单因素;建立了基于指数分布的数学模型,利用排队论分析单因素状态下的垃圾箱间距分布,得到了求解城市垃圾箱最佳间距的一般方法。     

城市旅游综合体发展模式与对策研究

旅游综合体顺应了世界休闲业发展的潮流,它以旅游为主导,是一种全新的生产力形态。界定了城市旅游综合体的基本概念,归纳了城市旅游综合体的主要特征,探讨了城市旅游综合体形成的机制,认为旅游消费转型发展、地方特色文化传承、城市商业发展、旅游供给能力升级、政府的城市发展政策支持是城市旅游综合体形成的主要因素。依据城市旅游综合体发展的核心驱动功能不同,将城市旅游综合体的开发模式分为娱乐旅游综合体、休闲度假游综合体、会展旅游综合体和商业旅游综合体4种类型,在此基础上,提出了促进城市旅游综合体健康持续发展的对策。     

振动试验数据管理系统概述

随着近些年振动试验技术的快速发展,对于振动试验数据的保存、管理和统计提出了更高的要求。鉴于此,附属于试验室信息管理系统的振动试验数据管理系统作为振动试验有效的管理工具,必然会成为提升试验室振动试验能力、规范试验技术的有效工具。     

高含硫天然气勘探开发潜在危害分析与防范

川东北地区大型天然气矿藏中硫化氢含量较高,且带有高剧毒性和高腐蚀性,勘探开发难度较大。同时气田所处区域的岩土条件十分脆弱,洪涝、大风、冰雹等气候灾害经常发生,易引发泥石流、滑坡,形成地质灾害。另外气田所在地人口密度大,给勘探开发设施布局和居民安全带来很大困难。文章通过对川东北地区天然气勘探、开发过程中存在的潜在危害进行详细分析,提出风险防范技术与对策,以供参考。     

Is Urban Stream Restoration Worth It?1

Kenney, Melissa A., Peter R. Wilcock, Benjamin F. Hobbs, Nicholas E. Flores, and Daniela C. Martínez, 2012. Is Urban Stream Restoration Worth It? Journal of the American Water Resources Association (JAWRA) 48(3): 603-615. DOI: 10.1111/j.1752-1688.2011.00635.x Abstract: Public investment in urban stream restoration is growing, yet little has been done to quantify whether its benefits outweigh its cost. The most common drivers of urban stream projects are water quality improvement and infrastructure protection, although recreational and aesthetic benefits are often important community goals. We use standard economic methods to show that these contributions of restoration can be quantified and compared to costs. The approach is demonstrated with a case study in Baltimore, Maryland, a city with a legal mandate to reduce its pollutant load. Typical urban stream restoration costs of US$500-1,200 per foot are larger than the cost of the least expensive alternatives for management of nitrogen loads from stormwater (here, detention ponds, equivalent to $30-120 per foot of restored stream) and for protecting infrastructure (rip-rap armoring of streambanks, at $0-120 per foot). However, the higher costs of stream restoration can in some cases be justified by its aesthetic and recreational benefits, valued using a contingent valuation survey at $560-1,100 per foot. We do not intend to provide a definitive answer regarding the worth of stream restoration, but demonstrate that questions of worth can be asked and answered. Broader application of economic analysis would provide a defensible basis for understanding restoration benefits and for making restoration decisions.     

Anaerobic degradation of microcrystalline cellulose: kinetics and micro-scale structure evolution

The degradation kinetics and micro-scale structure change of microcrystalline cellulose during anaerobic biodegradation were investigated. A modified Logistic model was established to properly describe the kinetics, which showed good fitness and wide applicability for cellulose degradation. A maximum degradation rate of 0.14 g L⁻¹ h⁻¹ was achieved after cultivating for 51.5 h. This result was in good agreement with the scanning electron microscope and X-ray diffraction analysis. Channels of 400-500 nm size started to occur on the crystalline surface of cellulose at around the inflexion time. Accordingly, the crystallinity significantly decreased at this point, indicating a degradation of the crystalline structure zones by anaerobic bacteria. This study offers direct morphological evidence and quantitative analysis of the biodegradation process of cellulose, and is beneficial to a better understanding of the cellulose degradation mechanism.     

Enhanced resistance of yeast mutants deficient in low-affinity iron and zinc transporters to stannous-induced toxicity

Tin or stannous (Sn²⁺) compounds are used as catalysts, stabilizers in plastic industries, wood preservatives, agricultural biocides and nuclear medicine. In order to verify the Sn²⁺ up-take and toxicity in yeast cells we utilized a multi-elemental analysis known as particle-induced X-ray emission (PIXE) along with cell survival assays and quantitative real-time PCR. The detection of Sn²⁺ by PIXE was possible only in yeast cells in stationary phase of growth (STAT cells) that survive at 25 mM Sn²⁺ concentration. Yeast cells in exponential phase of growth (LOG cells) tolerate only micro-molar Sn²⁺ concentrations that result in intracellular concentration below of the method detection limit. Our PIXE analysis showed that STAT XV185-14c yeast cells demonstrate a significant loss of intracellular elements such as Mg, Zn, S, Fe and an increase in P levels after 1 h exposure to SnCl₂. The survival assay showed enhanced tolerance of LOG yeast cells lacking the low-affinity iron and zinc transporters to stannous treatment, suggesting the possible involvement in Sn²⁺ uptake. Moreover, our qRT-PCR data showed that Sn²⁺ treatment could generate reactive oxygen species as it induces activation of many stress-response genes, including SOD1, YAP1, and APN1.