射流曝气的气液两相流的数值模拟

射流曝气在活性污泥处理方法中起着重要的作用。采用数值模拟的方法研究自吸式单级单喷射流器中的气液两相流动状况，通过对不同长径比和喷嘴面积比的射流曝气器模型的气液两相流的计算，定量分析长径比和喷嘴面积比对射流曝气器流场和空气与工作介质流量比的影响，为进一步设计开发新型高效的射流曝气器提供参考。     

Effective diffusivity of the uranyl ion in a granite from Inada, Ibaraki, Japan

The effective diffusivity of uranium(VI) in Inada granite has been determined by through-diffusion. Experiments were performed at room temperature (20–25°C) in a 0.1 mol 1⁻¹ KCl solution where uranium is present predominantly as the poorly sorbing UO₂²⁺. An effective diffusivity (D_e) of (3.6 ± 1.6) × 10⁻¹⁴ m² s⁻¹ was obtained, close to that for uranine (nonsorbing organic tracer), but one order of magnitude lower than those obtained for Sr²⁺ and NpO₂⁺, and two orders of magnitude lower than that obtained for I⁻. According to well established theory, a proportional relationship exists between D_e and the diffusivity in the bulk of the solution (D_v). The effective diffusivity obtained in granite was not proportional to D_v. This agrees with results obtained for effective diffusivity in a Swedish granite. The ratio D_e/D_v was found to be not constant but increased with D_e or D_v. This result suggests a limit to the application of the theory.     

Exchange of sulfur pollution between Bulgaria and Greece

The EMAP model (Eulerian Model for Air Pollution) is applied for calculating the sulfur concentration and deposition fields for 1995 as based upon Bulgarian and Greek sources. The country-to-country budgets show that about 4% of the sulfur oxides emitted by Bulgaria are deposited over Greek territory, estimated at 28 kt S. Only 2% of sulfur compounds emitted by Greece are deposited over Bulgaria, estimated at 6.2 kt S for 1995. This data is in agreement with EMEP/MSC-W estimates and provides more details concerning time and space. The results can be used in decision-making, negotiating and the development of contamination strategies.     

Modeling mobile source emissions during traffic jams in a micro urban environment

Urbanization typically involves a continuous increase in motor vehicle use, resulting in congestion known as traffic jams. Idling emissions due to traffic jams combine with the complex terrain created by buildings to concentrate atmospheric pollutants in localized areas. This research simulates emissions concentrations and distributions for a congested street in Minsk, Belarus. Ground-level (up to 50-meters above the street's surface) pollutant concentrations were calculated using STAR (version 3.10) with emission factors obtained from the U.S. Environmental Protection Agency, wind speed and direction, and building location and size. Relative emissions concentrations and distributions were simulated at 1-meter and 10-meters above street level. The findings demonstrate the importance of wind speed and direction, and building size and location on emissions concentrations and distributions, with the leeward sides of buildings retaining up to 99 percent of the emitted pollutants within 1-meter of street level, and up to 77 percent 10-meters above the street.     

Evaluating non-equilibrium solute transport in small soil columns

Displacement studies on leaching of bromide and two pesticides (atrazine and isoproturon) were conducted under unsaturated steady state flow conditions in 24 small undisturbed soil columns (5.7 cm in diameter and 10 cm long) each collected from two sites differing in soil structure and organic carbon content in North Germany. There were large and irregular variabilities in the characteristics of both soils, as well as in the shapes of breakthrough curves (BTCs) of different columns, including some with early breakthrough and increased tailing, qualitatively indicating the presence of preferential flow. It was estimated that one preferential flow column (PFC) at site A, and four at site B, contributed, respectively to 11% and 58% of the accumulated leached fraction and to more than 80% of the maximum observed standard deviation (SD) in the field-scale concentration and mass flux of pesticides at two sites. The bromide BTCs of two sites were analyzed with the equilibrium convection-dispersion equation (CDE) and a non-equilibrium two-region/mobile-immobile model. Transport parameters of these models for individual BTCs were determined using a curve fitting program, CXTFIT, and by the time moment method. For the CDE based equilibrium model, the mean values of retardation factor, R, considered separately for all columns, PFCs or non-preferential flow columns (NPFCs) were comparable for the two methods; significant differences were observed in the values of dispersion coefficients of two sites using the two estimation methods. It was inferred from the estimated parameters of non-equilibrium model that 5-12% of water at site A, and 12% at site B, was immobile during displacement in NPFCs. The corresponding values for PFCs of two sites were much larger, ranging from 25% to 51% by CXTFIT and from 24% to 72% by the moment method, suggesting the role of certain mechanisms other than immobile water in higher degrees of non-equilibrium in these columns. Peclet numbers in PFCs of both sites were consistently smaller than five, indicating the inadequacy of the non-equilibrium model to incorporate the effect of all forms of non-equilibrium in PFCs. Overall, the BTCs of individual NPFCs, PFCs and of field average concentration at the two sites were better reproduced with parameters obtained from CXTFIT than by the moment method. The moment method failed to capture the peak concentrations in PFCs, but tended to describe the desorption and tail branches of BTCs better than the curve fitting approach.     

污水在水体中的稀释扩散及稀释度的计算

结合长江白龙港水域水力模型试验对污水排海工程中污水稀释扩散的机理进行了描述，并对污水的两种稀释度（浓度释稀度和体积稀释度）进行了分析比较，得出了在污染物本底值存在时两种稀释度之间的关系。     

河谷型城市风场及污染物扩散的CFD数值仿真

为研究河谷型城市地形及其引起的风场和污染物扩散的复杂问题,利用CFD（计算流体力学）方法和复杂地形网格生成技术,建立河谷型城市风场及大气污染分布的数值仿真模型,实现CFD方法在复杂地形空气运动和污染物扩散方面的应用.分别使用LES（large eddy simulation）模型和mixture模型研究兰州市地面风场特征和污染物扩散形态,计算得到的污染物分布结果与实测结果分布一致.结果表明:复杂地形对空气运动的影响很大,如风速因山体屏障作用会呈现带状分布特征,山体后侧易出现弱风区域;同时,风场会密切影响污染物扩散,决定了污染物扩散形态,如幅散能够影响污染物扩散范围及污染水平.而给定西北风条件下,如地面以上10 m、风速为5 m/s、不受地形阻挡情况下,工业区污染物浓度被稀释10倍,约扩散2.2 km;山体阻挡会抑制污染物纵向扩散,表现在山体阻挡情况下污染物稀释100倍时的扩散长度约为相对平坦区域的1/3.此外,不同的入口风向会引起空气运动与山体相互作用发生变化,进而会使得地面风速、局部风场存在差异,造成污染物扩散及分布形态差异.研究显示,CFD方法可行,模型可靠,可以用来研究地形对风场和污染物扩散的影响.      

城市立体交通系统中污染物传播特性数值模拟

构建了一个包含交通转盘、隧道、高架桥和下沉式公交站的立体交通几何模型,建立了该系统中流体流动与污染物传播的耦合数学模型,数值分析了环境风变化时,该系统中流体流动与气态污染物的传播规律.结果表明,环境风向的变化直接改变了公交站区域流体的流向途径,在公交站区域;北风时的平均污染物浓度是西风时的3.5倍,而在转盘中央区域,北风时平均污染物浓度是西风时的5倍.西风时,环境风速从0.5m/s增加到3.5m/s,东侧公交站区域的平均污染物浓度减少95.21%;交通隧道内,环境风速的增加使空气流通速度增加,污染物浓度迅速降低.     

基于微积分的LPG和CNG喷射火模型建立和三维数值模拟

由液体和气体泄漏引发的喷射火灾事故屡见不鲜,而现有的喷射火模型却有诸多缺陷。将喷射火形状近似为圆锥,鉴于液体和气体的泄漏速度随压强和温度均有变化、点源离地面会有一定高度、风速对火焰倾角也有影响、圆锥喷射中心线上每个点源对目标的热辐射均不同等实际情况,新建液体和气体扩展半径的计算方法,引入风速对火焰高度和火焰偏角的作用,比较AGA法和Thornton模型,发现AGA法更加符合实际,再利用微积分原理建立三维点源喷射火模型,展示火焰形状对目标的影响,从而得出热辐射的最终危险性。最后以LPG和CNG储罐喷射火事故为例进行对比验证,首次模拟出喷射火的形状,更清晰准确地展示了目标入射热辐射通量随目标点位置的变化和危险范围,可为火焰阵面处的消防安全决策提供参考。     

高倍泡沫加速泄漏LNG扩散的有效性模拟试验

泡沫灭火剂在扑灭液体火灾中起到重要作用,关于低温液体蒸气云扩散控制的研究也逐渐得到应用。通过小尺寸模拟试验验证高倍泡沫加速泄漏LNG扩散的有效性,设计并进行了低温液体自然蒸发和高倍泡沫覆盖低温液体两个对照试验,测量了竖直方向上10个高度处的温度及装置整体质量,从而获取了低温液体蒸气到达泡沫层顶端时温度及蒸发速率的变化情况。结果表明,与未添加泡沫的情况对比,高倍泡沫的覆盖使泄漏低温液体在1 800 s内的蒸发量减少了6.4%,如果时间更长则减少的比例更多,且蒸发出的低温液体穿过泡沫层后蒸气温度可达0℃左右,而未添加泡沫时同等高度处蒸气温度为-75℃左右。0℃时,LNG蒸气密度已明显小于空气密度,此温度下LNG蒸气会迅速向上扩散,而不至在地表积聚,由此证明高倍泡沫能够加速泄漏低温液体蒸气向上扩散,减小了低温液体蒸气在地面积聚并引发火灾爆炸事故的可能性,从而证实了高倍泡沫加速泄漏LNG扩散的有效性。