The Influence of Varying Algal Biomass On Contaminant Exposure in Benthic-Planktonic Mesocosms: Copper (Ii)

A series of mesocosms was exposed to a suite of light treatments and nutrient enrichment in order to generate algal communities of varying biomass. the influence of this biomass on the speciation of copper (II) was studied. Distribution coefficients (_Kd,Lkg-1) were relatively high (log_Kd = 5 to 7), indicative of robust trace metal sequestration, and were likely controlled by the particulate organic carbon content (foc). Differences in _Kd over time and among treatments were significant, as was the relationship between _Kd and foc. Fluorescence quenching was used to determine binding capacities (_Lt, M) and their associated binding constants (_Kcond,M^-1) in order to model the solid phase copper speciation. the _Kcond ranged between 2.1 and 5.2 × 10¹²M^-1, indicating a very strong copper-ligand complex, and was higher in mesocosms that received more light. the light _Lt increased over time, dramatically after the nutrient enrichment, but did not vary systematically among light treatments. _Lt ranged from 7.2 × 10- 7 to 4.9 × 10- 5 M. the large magnitudes of _Kd, _Kcond and _Lt ensured that greater than 97% of total copper in the mesocosms was complexed by organic matter. the total copper concentration ([Cu]_T, M) needed to reach a target dissolved copper concentration of 10^-12.5 M (pCu = 12.5) was determined for each mesocosm over time. [Cu]_T was between 8.02 × 10^-5 and 3.41 × 10^-2 M, and increased over time. the [Cu]_T normalized to the target pCu (Effective Dose Ratio, EDR) increased directly with increases in algal biomass, indicating a direct link between system productivity and copper exposure. Approximately 45% of the variance in EDR was explained by variance in total biomass, while the residual variance in EDR was due likely to differences in the strengths of particle associations and magnitude of binding capacities.     

基于吸附质-分子探针的新型交联壳聚糖的吸附特性

研究了CCTS对低浓度游离酸的吸附特性,基于吸附质-分子探针电位法,考察了吸附剂活性中心数目、游离酸种类和温度对吸附行为的影响。结果表明,在30℃时,CCTS吸附游离酸的过程,遵循单分子层机理进行吸附。吸附剂―吸附质相互作用能U制约表观吸附速率常数K,K、U大小分别为2.519×10-2,4.084×10-2,9.398×10-2L/min和7.264,7.420,7.926 kJ/mol,两者存在线性相关性,呈逐渐增大趋势。K、U大小随着活性中心数目G的增加而增大。CCTS吸附游离酸为吸热过程,吸附表观活化能Ea为33.98 kJ/mol。3种类型游离酸K、U的大小顺序为:HClO4>HNO3>H2SO4,吸附分维数Dw分别为1.384、1.567、1.911,Dw值越大,导致表观吸附速率常数降低。     

一种适用于深水压试验的传压隔热装置设计

目的真实高效地进行深水压环境的温度模拟。方法提出一种深水压试验压力加载过程中的恒温实现方法,通过开展基于皮囊的结构设计、密封性设计、导热性研究等工作,设计一种适用于深水压试验的传压隔热装置,对其进行理论分析和仿真计算。结果该装置可以实现液体温度在较长时间内基本恒定,具有良好的传压隔热性能。结论在建立的实验系统上进行了试验研究,实现了深水压环境模拟试验中压力载荷同步条件下液体温度小范围恒定功能,该技术为深水压环境试验的相关技术研究提供了技术储备。     

Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

利用碎片常数和结构因子法估测农药在正辛醇／水相中的分配系数

本文详细阐述了用碎片常数与结构因子法估测农药在正辛醇与水相体系中分配系数的方法，并对６０种农药分配系数的估测结果与用经典的摇瓶测试法得到的实测值进行了比较，结果表明：估测结果与实测值基本吻合，碎片常数和结构因子估测法可以作为获得农药分配系数的另一种途径。     

农药和其它有机化合物环境参数的相关性及其预测

农药和其它有机化合物的水溶解度、正辛醇／水分配系数、有机碳吸附常数和生物浓缩因子等物化参数之间存在着明显的相关性，有机化合物的水溶解度与其正辛醇／水分配系数、有机碳吸附常数和生物浓缩因子呈负相关；正辛醇／水分配系数与有机碳吸附常数和生物浓缩因子呈正相关。本文所建立的数学关系式能较好地预测未知化合物的环境特性。     

A pilot scale anoxic/oxic membrane bioreactor (A/O MBR) for woolen mill dyeing wastewater treatment

A pilot-scale( 10 m^3/d) anoxic/oxic membrane bioreactor( A/O MBR) was tested for dyeing wastewater treatment of woolen mill without wasting sludge in 125 days operation. Results showed that the effluent quality was excellent, i.e. effluent COD less than 25 mg/L,BOD5 under 5 mg/L, turbidity lower than 0.65 NTU, and colour less than 30 DT, and met with the reuse water standard of China. The removal rates of COD, BOD5, colour, and turbidity were 92.4%, 98.4%, 74% and 98.9%, respectively. Constant-flux operation mode was carried out in this study, and backwash was effective for reducing membrane fouling and maintaining constant flux. Membrane fouling had heavy impact on energy consumption. More attention should be paid on pipe selection and design for the sidestream MBR system, too.     

城市生活垃圾渗透系数测试研究

采用常水头测渗实验，对不同压实密度和水力梯度下的新鲜垃圾与陈垃圾的渗透系数进行测试，根据达西定律求得渗透系数值。由于垃圾的不均匀性、小颗粒的运动和大孔隙沟道流的形成和改变，实验初始阶段渗透系数值先增大至峰值，然后缓慢降低直至趋于稳定。实验稳定后，新鲜垃圾压实密度为0．75—0．95t／m^3时，渗透系数值约为1．26E-03～1．43E-03cm／s。陈垃圾在压实密度分别为1．2和1．4t／m^3时，渗透系数为8．29E-04和1．35E-04cm／s。     

电路板环境应力筛选方法效能分析

论述了对设计、工艺成熟电路板组件的环境应力筛选方法,对比恒定高温、温度循环、温度冲击、振动及其组合筛选的筛选度,并进行效能比分析。通过对比各种应力对有较大共性的电路板组件筛选的分析,对GJB 1032进行适当裁减,提出了不少于10个温度循环加随机振动的筛选组合,以适应电路板板级筛选要求,提高效能比。     

几种解离常数测定方法的比较与评价

介绍了电位滴定法、分光光度法、电导法和毛细管电泳法等几种测定物质解离常数的常用方法,分析了其测定原理及优缺点,讨论了解离常数测定方法的研究方向。