Inhibitory effects of nisin-coated multi-walled carbon nanotube sheet on biofilm formation from Bacillus anthracis spores

Multi-walled carbon nanotube（MWCNT） sheet was fabricated from a drawable MWCNT forest and then deposited on poly（methyl methacrylate） film. The film was further coated with a natural antimicrobial peptide nisin. We studied the effects of nisin coating on the attachment of Bacillus anthracis spores, the germination of attached spores, and the subsequent biofilm formation from attached spores. It was found that the strong adsorptivity and the super hydrophobicity of MWCNTs provided an ideal platform for nisin coating. Nisin coating on MWCNT sheets decreased surface hydrophobicity, reduced spore attachment, and reduced the germination of attached spores by 3.5 fold, and further inhibited the subsequent biofilm formation by 94.6% compared to that on uncoated MWCNT sheet. Nisin also changed the morphology of vegetative cells in the formed biofilm.The results of this study demonstrated that the anti-adhesion and antimicrobial effect of nisin in combination with the physical properties of carbon nanotubes had the potential in producing effective anti-biofilm formation surfaces.     

Seasonal and diurnal variations of atmospheric peroxyacetyl nitrate, peroxypropionyl nitrate, and carbon tetrachloride in Beijing

Atmospheric peroxyacetyl nitrate(PAN), peroxypropionyl nitrate(PPN), and carbon tetrachloride(CCl4) were measured from September 2010 to August 2011 in Beijing. PAN exhibited low values from mid-autumn to early spring(October to March) with monthly average concentrations ranging from 0.28 to 0.73 ppbV, and increased from early spring to summer(March to August), ranging from 1.37–3.79 ppbV. The monthly variation of PPN was similar to PAN, with low values(below detection limit to 0.18 ppbV) from mid-autumn to early spring, and a monthly maximum in September(1.14 ppbV). The monthly variation of CCl4was tightly related to the variation of temperature, exhibiting a minimum in winter(69.3 pptV) and a maximum of 180.6 pptV in summer. Due to weak solar intensity and short duration, PAN and O3showed no distinct diurnal patterns from morning to night during winter, whereas for other seasons, they both exhibited maximal values in the late afternoon(ca. 15:00 to 16:00 local time) and minimal values during early morning and midnight. Good linear correlations between PAN and PPN were found in autumn(R = 0.91), spring(R = 0.94), and summer(R = 0.81), with slopes of 0.130, 0.222, and 0.133, respectively, suggesting that anthropogenic hydrocarbons dominated the photochemical formation of PANs in Beijing. Positive correlation between PAN and O3 in summer with the low slopes( O3 / PAN) ranging from 9.92 to 18.0 indicated serious air pollution in Beijing, and strong negative correlation in winter reflected strong O3consumption by NO titration and less thermal decompositin of PAN.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.     

京津冀及周边地区低碳经济发展水平评价

随着应对全球气候变化进程的不断推进,“低碳经济”已逐渐成为世界各国实现经济社会可持续发展的必由之路.京津冀及周边地区社会经济发展较不平衡,整体推进低碳经济发展存在较大的困难,为有效促进低碳经济发展的策略选择,本文通过构建低碳经济发展水平评价指标体系,对京津冀及周边地区的低碳经济发展状况进行评价.结果显示,京津冀及周边地区低碳经济发展水平差异较大：北京低碳经济水平相对较高,其他地区距离低碳经济发展水平尚有较大差距.由此,京津冀及周边地区应根据地区经济发展特点及其低碳经济发展状况,采取不同的低碳发展策略选择,以有效推进低碳经济发展模式的顺利转型.     

焦化行业苯并芘排放量与厂界达标预测分析

论文以某100万吨/年焦化项目为例,分析其在不同地形和风速参数条件下苯并芘排放量,预测不同条件下距离焦炉炉体中心-1000～1000米范围内各网格点的苯并芘超标概率,最终得出风速、地形参数对苯并芘浓度超标概率的影响.     

Lindet ypeF(K)沸石对Zn~(2+)的吸附研究

利用粉煤灰合成Linde type F(K)沸石吸附重金属Zn2+,考察吸附剂量、pH值、反应温度对Zn 2+吸附效果影响,研究沸石吸附Zn2+的等温线与动力学,得到了相应的模型。结果表明:吸附剂量、pH值、反应温度均对Zn2+去除效果影响显著。随着吸附剂量增大,Zn 2+去除效果不断提高,饱和吸附量逐渐减小。初始pH值为3~7时,沸石对Zn2+去除率随pH值升高迅速提高。反应温度越高,沸石吸附Zn2+到达平衡时间越短。沸石对Zn2+吸附过程符合Langmuir吸附等温式,其吸附为单分子层吸附;准二级反应动力学方程能很好描述沸石对Zn2+的吸附行为。     

SBR法处理低C/N污水的工程应用——以某基地污水处理站改造工程为例

低C/N污水的生化处理过程中,由于碳源不足,不能满足硝化和反硝化的要求,造成出水NH3-N超标。采用SBR工艺对某基地污水处理站厌氧处理后的低C/N污水进行改造,处理后出水COD去除率达到97%以上,NH3-N去除率达到93%以上。     

重金属抗性解磷细菌的磷溶解特性研究

从湖南省湘西州花垣县的铅锌矿表层土壤中,筛选出两株具有重金属抗性和解磷特性的细菌T PSB1和T PSB2.通过16S rRNA基因序列比对,分别鉴定为嗜麦芽寡养单胞菌(Stenotrophomonas maltophilia)和唐菖蒲伯克霍尔德菌(Burkholderia gladioli).T PSB1和T PSB2在含有难溶性无机磷液体培养基中,其上清液的可溶性磷含量最高分别达到了402.9 mg·L-1和589.9 mg·L-1;在难溶性有机磷固体和液体培养基中,固体平板上均出现解磷圈,而液体培养基上清液中,可溶性磷含量也分别达到了2.97 mg·L-1和4.69 mg·L-1.另外,两株细菌对重金属Zn2+的抗性最高,在其浓度为2000 mg·L-1固体和液体培养基条件下均可以生长,磷溶解浓度分别为114.8 mg·L-1和125.1 mg·L-1.而在含铬和铅的浓度为1 000 mg·L-1的液体培养基中,两株细菌同样表现出重金属抗性.在Pb2+浓度为1000 mg·L-1的液体培养基中,磷溶解浓度分别达到了57.9 mg·L-1和71.7 mg·L-1;而在Cr2+浓度为1000 mg·L-1的培养基中磷溶解浓度分别为60.1 mg·L-1和98.4 mg·L-1.     

活性炭催化过氧化氢去除荧光增白剂

研究了活性炭(activated carbon,AC)吸附、改性活性炭(activated carbon modified,ACM)吸附、过氧化氢(H2O2)氧化、AC催化H2O2等方法对水体中荧光增白剂VBL的处理效果,并通过自由基俘获剂叔丁醇、催化过程气体分析等探讨了AC催化H2O2分解VBL的机制.结果表明,经硝酸铁[Fe(NO3)3]改性过的ACM对VBL的吸附去除率高于未改性的AC.活性炭催化H2O2对VBL的去除效果明显,但未改性AC催化去除率高于ACM.60 min时,AC催化氧化去除率即可达到95%以上,而ACM仅为58%.叔丁醇的加入降低了AC和ACM催化氧化对VBL的去除率,表明AC催化H2O2氧化能促进H2O2形成羟基自由基(·OH)和原子氧参与反应.AC催化H2O2分解及释放气体分析表明,AC能催化H2O2形成氧气并放热,且ACM明显快于AC.结合催化H2O2去除VBL效率的结果分析,ACM催化反应时活性中间物(自由基和原子氧等)产生速率快于AC,活性中间物自身消耗形成氧气,而不是用于分解VBL.催化反应中活性中间产物的形成速率与反应物供给速率的不匹配可能是导致ACM催化效果弱于AC的重要原因.