Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.     

北京市PM5.0可吸入颗粒物反演及其时空分布分析

分析城市可吸入颗粒物的空间特征及影响因素对于制定更为有效的可吸入颗粒物污染控制政策具有重要的现实意义.本研究在实际采样和遥感数据处理基础上,构造差值植被指数(DVI),通过建立TM影像与对应PM5.0颗粒物实测值之间的相关关系模型,对北京市2008~2010年3 a的PM5.0的分布进行了反演计算和精度分析;研究了NDBI和NDMI对PM5.0浓度的影响,进一步揭示了北京五环区域范围内可吸入颗粒物的时空分布特征.结果表明,采用DVI反演PM5.0分布的方法可行,反演精度在可接受范围内;整体上研究区2008年PM5.0颗粒物污染最轻,西南三环和四环以及东南三四环之间为颗粒物污染的高值区,西北五环附近颗粒物污染较轻;NDBI(归一化建筑指数)、NDMI(归一化水汽指数)与PM5.0可吸入颗粒物的分布分别呈现显著的负相关和正相关关系,且二者对PM5.0的影响相近.     

杭州市办公场所室内空气中PBDEs的污染现状与特征

分析评价了杭州市办公场所中PBDEs的污染现状、污染特征.结果表明,办公场所中PBDEs气相和颗粒相总浓度范围为40.66~141.00 pg·m-3,平均浓度为93.22 pg·m-3,是家庭室内、室外浓度的1.87、5.01倍.BDE-47、BDE-99为办公场所中最重要的两种同系物,分别占总浓度的33.29%、31.99%.PBDEs气相浓度是颗粒相的1.34倍,其中BDE-28、BDE-47、BDE-99主要存在于气相中,BDE-153、BDE-183主要存在于颗粒相中.     

海州湾表层沉积物重金属的来源特征及风险评价

根据2009年12月海州湾海域17个站位的环境调查资料,通过地统计学方法分析表层沉积物中6种重金属(Cd、As、Cu、Pb、Cr、Zn)的来源特征,采用潜在生态风险指数法进行重金属风险评价.结果表明,重金属分布格局整体呈西南高东北低、随离岸距离增大而减小的趋势;陆源污染输入是海州湾海域重金属的重要污染来源;有机碳含量、底质粒径和硫化物是影响重金属含量及其分布的重要因素;风险评价显示海州湾沉积物重金属总体处于中等生态风险状况,风险相对较高主要分布在龙王河口到临洪河口的近岸海域,潜在生态风险指数Cd>As>Cu>Pb>Cr>Zn,Cd是主要的生态风险贡献因子.     

SFBR中好氧颗粒污泥的培养及特性研究

接种自行培养的活性污泥,以模拟废水为基质,采用连续进水、间歇出水及厌氧/好氧交替的运行模式,尝试了在SFBR中进行好氧颗粒污泥的培养,并研究了好氧颗粒污泥的特性及反应器对污染物的去除效果.结果表明,通过逐步缩短沉降时间,28 d时成功培养出好氧颗粒污泥,所形成的好氧颗粒污泥呈黄色、形状不规则,且粒径较小(平均粒径0.56 mm),正常情况下的SVI保持在70 mL·g-1以下,EPS在59 d时达到最大值(以MLVSS计)373.24 mg·g-1,较培养初期增加了约2.5倍,运行后期由于颗粒出现解体,导致EPS急剧下降;反应器在运行过程中未能保持较高的污泥量,中后期MLSS始终在3 000mg·L-1以下;在63 d的运行时间里,除异常波动外,反应器对COD的去除率基本维持在90%左右,正常情况下出水COD小于100 mg·L-1,反应器对NH+4-N、TIN的去除效果波动较大,去除率分别为44.45%~94.72%及43.87%~93.13%,反应器对TP的去除率在44.50%~97.40%之间,正常情况下TP去除率可维持在60%以上;限于自动控制水平,夜间长时间的好氧饥饿期容易造成丝状菌过度生长,使得AGS在生长竞争中处于劣势,最终导致了AGS的解体.     

滴水湖及其水体交换区沉积物和土壤中PAHs的分布及生态风险评价

采用GC-MS联用技术分析了滴水湖及其水体交换区23个表层沉积物和土壤中16种多环芳烃(PAHs)的含量,探讨其分布特征及来源并对其生态风险进行评价.结果表明,滴水湖沉积物中16种PAHs含量范围是11.49~157.09 ng·g-1,平均含量为66.60 ng·g-1,湖区沉积物中PAHs含量比入湖区低,但比出湖区高.湖区外的沉积物和土壤中PAHs组成主要以中、高分子量PAHs(4环、5~6环)为主,而湖区内表层沉积物中PAHs组成则以低分子量PAHs(2~3环)和高分子量PAHs(5~6环)为主.通过特征化合物分子比值法、主成分分析及多元线性回归模型判源,表明湖区外沉积物和土壤中PAHs来源主要为燃烧源,而湖区内沉积物中PAHs来源为燃烧源和石油类产品泄漏的混合来源.生态风险评价显示,滴水湖及其水体交换区沉积物和土壤中PAHs生态风险较低.     

冬季东海、南黄海中DMS和DMSP浓度分布及影响因素研究

于2011年12月~2012年1月现场测定了东海、南黄海表层海水中二甲基硫(DMS)及其前体物质二甲巯基丙酸内盐(DMSP分为溶解态DMSPd和颗粒态DMSPp)的含量,研究了它们的浓度分布规律及其影响因素,并对DMSPp的粒级分布和DMS的海-气通量进行了探讨.结果表明,表层海水中DMS、DMSPd和DMSPp的浓度分别在0.58~4.14、0.37~7.86和4.29~25.76 nmol·L-1之间,平均值分别为(2.20±0.82)、(2.12±1.66)和(11.98±6.23)nmol·L-1.DMS、DMSPp与叶绿素a(Chl-a)呈现明显的正相关关系,并且它们的周日变化趋势基本一致,说明浮游植物生物量是影响研究海域内DMS和DMSP生产分布的关键因素.另外,DMSPd浓度和总细菌丰度表现出一定的负相关,这可能是在细菌释放的DMSP裂解酶的作用下DMSPd会发生裂解生成DMS.研究发现,5~20μm的微型浮游植物是海区内Chl-a和DMSPp的主要贡献者.此外,冬季东海、南黄海表层海水DMS的海-气通量在0.61~25.52μmol·(m2·d)-1之间,平均值为(8.30±5.92)μmol·(m2·d)-1.     

曝气膜生物反应器运行过程中污泥活性特征变化及其对膜污染的影响

研究了曝气膜生物反应器运行过程中活性污泥主要活性特征变化及其对膜污染的影响.通过排出剩余污泥的办法维持活性污泥浓度在4000 mg·L-1左右,并连续运行75 d.运行期间,每日检测活性污泥的各项性质指标便于反映污泥特性的变化.结果表明,随着反应器运行时间的延长,污泥脱氢酶活性逐渐增加,其对反应器的运行有着两方面的作用,一方面会强化微生物对污染物的去除,但另一方面则导致了胞外聚合物的增加,并加速膜污染.而污泥表观产率则随着运行时间的延长先增加后有所减少,其粒径逐渐减小,且胞外聚合物呈现增加的趋势,总的出水水质情况逐渐提高,与此同时,反应器内原生动物及后生动物在运行前期较少,而在后期大量出现.膜污染分析结果表明运行后期膜污染速度明显加快,其原因在于:污泥粒径的减小以及胞外聚合物的增加导致细小颗粒及胞外聚合物堵塞或在膜表面沉积数量增加.