钙化合物对前生体生成二英类的阻滞作用

针对城市生活垃圾焚烧（MSWI）过程中二（口恶）英类的生成机制以及焚烧飞灰的组成,研究了MSWI飞灰中常见的钙化合物（CaO,Ca（OH）2,CaCl2,CaSO4及Ca（NO3）2）对前生体五氯酚（PCP）及六氯苯（HCB）生成二（口恶）英类的阻滞作用.结果表明,280℃下加热2 h,Ca（NO3）2,Ca（OH）2和CaO对PCP生成二（口恶）英类的总阻滞效率分别为93.7%,80.4%和98.9%,而CaCl2和CaSO4几乎没有效果.CaO对PCP和HCB混合物生成二（口恶）英类物质同样具有良好的阻滞效果.另外,探讨了上述钙化合物对PCP及HCB生成二（口恶）英类的阻滞作用机理.     

黄孢原毛平革菌对固体介质中染料的降解反应

用黄孢原毛平革菌(Phanerochaetechrysosporium)3品系在固体介质中建立染料的降解反应体系,分光光度法测定染料的脱色降解率。黄孢原毛平革菌在琼脂、沙子及土壤等固体介质中均能有效地降解偶氮染料、蒽醌染料及聚合染料;植物材料玉米芯和木屑可作为共代谢碳源被该菌利用;BKM F 1767菌种降解能力最强,对活性艳蓝KN R的进攻性优于对PolyR 478和比布列希猩红。     

Chromium sorption on grape stalks encapsulated in calcium alginate beads

A novel sorbent based on 2% grape stalk wastes encapsulated in calcium alginate beads was investigated for the removal of Cr(VI) and Cr(III) from aqueous solutions. The sorbent proved to be efficient for chromium removal in both hexavalent and trivalent forms from aqueous solution at pH 3.0. In binary mixtures, the presence in solution of one of the forms enhances the sorption of the other which results in an increase of the amount of total chromium removed. This study suggests that the proposed sorbent can be used for the removal of chromium from wastewaters through a cost-effective and environmentally friendly process.     

Degradation of Starch–Calcium Carbonate Disposable Packaging in a Solid Waste Composting Facility

The compostability of starch–CaCO₃ disposable packaging was examined in a source-separated municipal solid waste (MSW) composting facility located in East Hampton, NY. Source-separated MSW:starch–CaCO₃ container mixtures of 0 (control), 5, and 20% (by volume) were prepared as feedstock for composting. Compost samples were collected weekly or biweekly during the composting process and examined for fragments of the starch–CaCO₃ containers. Changes in compost quality due to the presence of starch–CaCO₃ containers were assessed by measuring the nutrient and metal content of the three resultant MSW:starch–CaCO₃ composts. Finally, plant growth studies were conducted to examine the composts for possible plant growth inhibition due to the deterioration of the starch–CaCO₃ containers. Results showed that portions of the starch–CaCO₃ containers were not identified in any of the 5 and 20% sieved and characterized compost fractions > 1.3 cm following 1–3 weeks of composting. Mechanical agitation of the waste along with optimum composting conditions were sufficient to initiate the rapid degradation of the starch–CaCO₃ composites. Degradation of starch–CaCO₃ containers did not affect compost nutrient and trace element content. Grass biomass measurements were performed once weekly over 28 days for grass grown in control (0%), 5%, and 20% starch–CaCO₃-containing compost:soil mixtures. Significant differences in grass biomass for these compost:soil mixtures were measured only for the 0 and 20% starch–CaCO₃-containing compost:soil mixtures at 28 days (9.07 vs 11.05 g, respectively; P = 0.046).     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

Comparative evaluation of processes for heavy metal removal from municipal solid waste incineration fly ash

１ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｈａｓｂｅｅｎｒｅｐｏｒｔｅｄｔｈａｔｍｕｎｉｃｉｐａｌｓｏｌｉｄｗａｓｔｅｉｎｃｉｎｅｒａｔｉｏｎｆｌｙａｓｈ（ＭＳＷＦＡ）ｃｏｎｔａｉｎｓｃｏｎｓｉｄｅｒａｂｌｅａｍｏｕｎｔｓｏｆｈｅａｖｙｍｅｔａｌｓ（Ｂｅｒｇ，１...     

生活垃圾填埋场渗滤液生物处理技术及应用

在分析生活垃圾填埋场渗滤液特点的基础上 ,对其生物处理技术进行分析评价 ,针对其特点提出相应的处理对策措施。并对国内南北两个典型的垃圾填埋场的渗滤液处理系统进行了介绍。     

城市固体废物好氧生物反应器填埋方式的实验研究

MSW（城市固体废物）生物反应器型填埋是一种较新颖的方法.在系统分析现有填埋方法优缺点的基础上,对其加以改进,将强制通风好氧和渗滤液循环2种方式有机地结合在一起,构建了MSW好氧生物反应器.考察了NH3、CH4、CO2、pH和温度等因素,并监测分析了渗滤液中的COD、BOD5、Zn^2＋、NH4^＋和NO3^-等指标,旨在研究其中垃圾的降解及渗滤液中COD、BOD5、Zn^2＋、NH4^＋和NO3^-的去除情况,探讨该生物反应器对垃圾和渗滤液相关参数的作用机理.结果表明,该反应器对渗滤液中COD、BOD5、NO3^-的去除率分别达到96.34%、94.58%和99.9%,对其中的Zn^2＋也有较好的脱除效果.     

城市生活垃圾渗透系数测试研究

采用常水头测渗实验，对不同压实密度和水力梯度下的新鲜垃圾与陈垃圾的渗透系数进行测试，根据达西定律求得渗透系数值。由于垃圾的不均匀性、小颗粒的运动和大孔隙沟道流的形成和改变，实验初始阶段渗透系数值先增大至峰值，然后缓慢降低直至趋于稳定。实验稳定后，新鲜垃圾压实密度为0．75—0．95t／m^3时，渗透系数值约为1．26E-03～1．43E-03cm／s。陈垃圾在压实密度分别为1．2和1．4t／m^3时，渗透系数为8．29E-04和1．35E-04cm／s。     

城镇生活污水就近引浇防沙治沙工程林

城镇生活污水排入水体 ,严重影响水资源的使用价值。沙漠地区因缺水 ,造成许多地方造林失败。本文提出了将城镇生活污水就近引浇防沙治沙工程林的构想 ,并从经济和环境影响两个方面详细论述了该方案的比较优势