Optimal site selection for fluting paper mill from agricultural wastes in Golestan Province,Iran

Today, the issue of site selection for industrial units in developing countries which are poor in wood resources is considered as a vital matter and it is one of the key measures in the process of building industrial and giving service units. In every country there are some provinces and states which are more useful than other parts owing to primary infrastructures and facilities for industrialisation. As one of the suitable provinces of Iran, thanks to its lignocelluloses resources with 1,822,696 tons of exploitable waste, Golestan Province has a very good potential for building lignocelluloses products mills, such as fluting paper. For this end, in 2010, effective indices in fluting paper mill establishment were recognised in Golestan Province. Results showed that materials and products were the most important main indices and the preparation cost of raw materials was the most important sub-index. Finally, questionnaires were prepared for the best site selection and choices were evaluated according to the structure of interests and costs. The results of calculations performed through analytical hierarchy processes and in Expert Choice Software indicated that Gonbad City had the highest interest/cost ratio, and therefore, it is the best place for the establishment of floating paper mills from agricultural wastes in Golestan Province.     

台北市生活垃圾管理经验及启示

台北市生活垃圾管理效果显著,人均生活垃圾日清运量年均减量7.3%、资源回收率年均增长28.3%并带动资源回收产业发展、居民负担仅为1998年的22.0%、社会成本较1998年减少30.7%。主要经验包括:明确的生活垃圾减量与资源回收目标;系统的管理模式设计,包括政府(环保局、地方清洁队、资源回收管理基金)、生产商、回收商、处理商、居民、垃圾焚烧厂和填埋场以及第三方等主要干系人。采取的主要政策手段包括强制源头分类、随袋征收垃圾处理费、建立资源回收管理基金、对资源回收行业的政策扶持以及信息公开与公众参与等。台北市先进的生活垃圾管理经验对中国大陆城市开展垃圾分类与资源化管理具有重要的参考价值。     

Effect of organic matter and moisture on the calorific value of solid wastes: An update of the Tanner diagram

Objective of the work was to experimentally determine the effect of the organic matter and moisture contents on the calorific value of organic solid wastes. Nine substrates (i.e. newsprint, biodried municipal solid wastes, municipal solid waste derived composts, wastewater sludges, and sea weed derived compost), with organic matter contents that ranged from 12% to 91% (dry weight) were used in the experiments. All substrates were dried and ground and deionized water was artificially added in order to achieve certain target moisture contents per substrate. The higher heating value (HHV) was, then, determined experimentally for each sample using a bomb calorimeter. Best reduced models were developed to describe the higher and lower heating values as a function of organic matter, ash and moisture contents. A triangular plot was constructed and the self-sustained combustion area was determined and compared to that of the Tanner diagram. Response surfaces were drawn to visually assess the effect of organic matter and moisture contents on the calorific value of the wastes.     

Influence of aeration modes on leachate characteristic of landfills that adopt the aerobic–anaerobic landfill method

As far as the optimal design, operation, and field application of the Aerobic–Anaerobic Landfill Method (AALM) are concerned, it is very important to understand how aeration modes (different combinations of aeration depth and air injection rate) affect the biodegradation of organic carbon and the transformation of nitrogen in landfill solid waste. Pilot-scale lysimeter experiments were carried out under different aeration modes to obtain detailed information regarding the influence of aeration modes on leachate characteristics. Results from these lysimeter experiments revealed that aeration at the bottom layer was the most effective for decomposition of organic carbon when compared with aeration at the surface or middle layers. Moreover, the air injection rate led to different nitrogen transformation patterns, unlike the lesser influence it has on organic carbon decomposition. Effective simultaneous nitrification and denitrification were observed for the aeration mode with a higher air injection rate (=1.0 L/min). On the other hand, the phenomenon of sequenced nitrification and denitrification could be observed when a low air injection rate (=0.5 L/min.) was employed. Finally, it is concluded that, for AALM, air injection with a higher air injection rate at the deepest layer near the leachate collection pipe tends to accelerate the stabilization of landfill waste as defined in terms of the enhancement of denitrification as well as organic carbon decomposition.     

Modeling and comparative assessment of municipal solid waste gasification for energy production

Gasification is the thermochemical conversion of organic feedstocks mainly into combustible syngas (CO and H₂) along with other constituents. It has been widely used to convert coal into gaseous energy carriers but only has been recently looked at as a process for producing energy from biomass. This study explores the potential of gasification for energy production and treatment of municipal solid waste (MSW). It relies on adapting the theory governing the chemistry and kinetics of the gasification process to the use of MSW as a feedstock to the process. It also relies on an equilibrium kinetics and thermodynamics solver tool (Gasify®) in the process of modeling gasification of MSW. The effect of process temperature variation on gasifying MSW was explored and the results were compared to incineration as an alternative to gasification of MSW. Also, the assessment was performed comparatively for gasification of MSW in the United Arab Emirates, USA, and Thailand, presenting a spectrum of socioeconomic settings with varying MSW compositions in order to explore the effect of MSW composition variance on the products of gasification. All in all, this study provides an insight into the potential of gasification for the treatment of MSW and as a waste to energy alternative to incineration.     

Thermal valorization of post-consumer film waste in a bubbling bed gasifier

The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes. A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m³ and cold gas efficiencies up to 60%.     

炉渣在锅炉湿法除尘废水处理中的应用

利用燃煤炉渣直接过滤处理锅炉湿法除尘废水 ,可以提高出水水质 ,对废水中 SS、CODcr和HSO4- 有显著去除效果 ,出水可以满足循环回用要求     

城市生活垃圾填埋场甲烷气资源的产量估算及其利用

本文论述了填埋场甲烷气体的产生过程及影响因素，介绍了三种产气量估算方法及其主要特点、适用范围，并指出运用数学模型对产气量作出预测，为垃圾填埋场气体收集与处理系统的设计提供可靠的依据。同时，论述了甲烷气体的减排和综合利用措施。     

Influence of Care of Domestic Carnivores on Their Predation on Vertebrates

Abstract: Domestic dogs (Canis familiaris) and cats (Felis catus) are the most abundant mammalian carnivores worldwide. Given that domestic carnivores rely on human‐provided food, their densities are usually independent of prey densities. Nevertheless, underfed pets may need to hunt to meet their energetic and nutritional requirements. We explored the effects of different levels of care (provision of food) of dogs and cats on their predation rates on wild vertebrates in 2 areas of southern Chile. We interviewed cat and dog owners and analyzed prey remains in scats of pets to examine how domestic dogs and cats were managed and to gather information on the wild vertebrates killed and harassed by pets. We used logistic regression to examine the association between pet care and the frequency of wild vertebrate remains in scats. The probability of a dog preying on vertebrates was higher for poorly fed than for adequately fed dogs (odds ratio = 3.7) and for poorly fed than for adequately fed cats (odds ratio = 4.7). Domestic dogs and cats preyed on most endemic and threatened mammals present in the study sites. Our results provide support for the hypothesis that the less care domestic animals receive from owners the higher the probability those animals will prey on wild vertebrates.     

超临界水气化处理对脱水污泥中重金属环境风险的影响

为探究超临界水气化前后脱水污泥中重金属的变化及生态风险,从重金属(Ni、Cu、Zn、Pb、Cr)的含量、化学形态分布及浸出毒性等多方面出发,利用地层累积指数(Igeo)、潜在生态风险指数(RI)和风险评估指数法(RAC)对江苏地区10种不同种脱水污泥超临界水气化前后重金属的环境生态风险进行综合评价.结果表明:不同污水厂脱水污泥经超临界水气化处理后,绝大部分污泥中重金属浸出毒性和生物可利用组分重金属含量明显降低,即处理后重金属的直接环境风险大大降低.不同重金属含量的脱水污泥经超临界水气化处理后,重金属环境污染程度及潜在生态风险程度显著降低,环境风险值被降至相对安全水平,对环境表现出低风险或无风险.p H值在一定程度上影响处理后污泥中重金属的环境风险.超临界处理时,污泥的p H呈现酸性时会引起反应釜腐蚀,从而导致固相残渣中Ni、Cr的生物可利用组分含量增加,当p H呈现碱性时则更利于重金属以稳定形态富集到固相产物中.