高密度污泥工艺在水处理中的应用

高密度污泥水处理工艺可使污泥生成量减少到十分之一左右，极大地减轻了污泥处理的负担；污泥的沉降和脱水性能得到改善，有可能不再需要投加混凝剂的工序。     

加压活性炭生物膜法处理DSD有机废水

采用加压活性炭生物膜法处理以对硝基甲苯磺酸盐为主的难降解的有机废水的研究,是在活性炭生物膜法处理有机废水基础上发展起来的新技术。本实验结果表明,在加压9.8×10~4Pa(1kgt/cm~2)的条件下,COD_(Cr)去除率为62％～70％,比常压活性炭生物膜法高20％～25％;其容积负荷Nv=1.7～2.9kgCOD/m~3·d,比一般活性污泥法高3～6倍。     

Stability analysis of alkaline nitrobenzene-containing wastewater by a catalyzed Fe-Cu treatment process

Iron and copper bimetallic system (catalyzed Fe-Cu process) is a promising technology for alkaline nitrobenzene-containing wastewater treatment. However, little is currently known about the changes of treatment efficiency with time going. This research investigated the long-term performance of the catalyzed Fe-Cu process to reduce nitrobenzene (NB) in alkaline wastewater. In addition, the changes of the metal surfaces morphologies and matters before and after the reaction were analyzed by scanning electron microscopy (SEM) in conjunction with energy-dispersion spectroscopy (EDS) and X-ray diffraction spectroscopy (XRD). The results showed that the surface properties of copper almost remained unchanged after weeks of operation, which spelled its strong chemical stability and resistance to poisoning. Moreover, the results indicated that there were two reasons for the treatment efficiency decreasing with time. One was the gradual iron element consumption due to corrosion. The other was iron reactivity weakened due to the precipitates accumulation on the surfaces that were mainly Fe₃O₄ and FeCO. __________ Translated from Environmental Pollution & Control, 2006, 28(10): 783–785 [译自: 环境污染与防治]     

医疗废物处置工程多技术方案综合评价系统研究及其辅助软件设计

针对医疗废物处置工程技术方案的选择问题,在综合分析医疗废物处置工程技术方案选择的影响因素和医疗废物处置技术特点的基础上,结合层次分析法和Delphi法,提出了一套综合评价指标体系及方法.选取技术性能、经济性、环境影响和社会制约因素等4个方面共24项指标,形成了初步综合评价指标体系,并建立了综合评价层次分析模型.由于涉及的数据量大且计算复杂,开发了相应的医疗废物处置工程技术方案综合评价系统的辅助应用软件.     

循环悬浮式半干法烟气脱硫技术在煤粉锅炉中的应用

半千法烟气脱硫技术目前在国内正在快速推广应用中，但成功的实例还较少，还存在系统不可靠，技术指标达不到，故障率高等问题。介绍了循环悬浮式半千法烟气脱硫技术及首次在煤粉锅炉中应用的烟气净化新工艺：静电预除尘＋循环悬浮式半干法烟气脱硫＋布袋除尘，论述了净化原理及在我厂的实际应用情况。     

染料废水的治理现状及展望

介绍了染料废水的处理现状,目前国内外主要的处理方法有物化法(常用的有吸附法、混凝法、膜技术等)、化学法(如氧化法、电解法等)和生化法(投菌法微生物降解,好氧/厌氧工艺),介绍了各种工艺方法处理染料废水的实例并指出了各方法的优缺点和技术的关键,最后对今后染料废水处理技术的发展进行了展望。     

一种化纤废水处理的运行及分析

化纤废水含有各种难降解有机物，国内外一直未能提出一套较好的处理方法，本文介绍了一种化纤废水的研究，处理工艺及其主要设计参数以及运行管理，事实证明了这种方法是可行的，其具有处理效果稳产，产泥量少，具有一定的消泡作用等优点。     

用硫酸渣制备铁基颜料铁黄

以硫酸渣为原料，用黄铁矿粉作还原剂，采用湿式空气氧化法制备铁基颜料铁黄。试验得出的适宜工艺条件为：Fe^2 浓度0．25—0．40mol/L，氧化温度70℃，用氢氧化钠或氨水调节反应液的pH，氧化过程溶液的pH控制在3—4。依照该工艺制得的铁基颜料铁黄，其各项指标符合HG／T2249—91标准。     

Reasons for non-participation in a kerbside recycling scheme

In this article potential barriers to recycling are explored within a UK community of approximately 8000 households that are piloting a kerbside paper recycling scheme. All 1690 non-users of the scheme were surveyed for their decisions not to participate. A 43% response rate was generated from the survey and the reasons given by householders were coded into 12 categories. The main reasons for non-participation included insufficient paper and lack of space in which to locate the recycling bin. 62% of the non-participants reported that they were recycling paper using other facilities such as local bring schemes and charity collections. Strategies to increase participation in the kerbside scheme are suggested.