生产性IC反应器厌氧颗粒污泥的生物学特征

IC反应器以絮状污泥接种用于处理酒糟废水,运行至第180d时分别测定反应器第1、第2反应室颗粒污泥的VSS、产甲烷活性、胞外多聚物和辅酶F420等各项生物学指标。结果表明反应器内颗粒污泥具有较强活性,反应器COD去除率基本稳定在95%以上,出水COD不超过1000mg/L。     

厌氧发酵方式对乳渣废水产酸性能的影响

为了研究厌氧发酵方式对乳渣废水发酵产酸效果的影响,分别对乳渣废水采用自然型发酵、填料型发酵及中性型发酵（pH=7.0±0.2）,并进行连续2个周期的厌氧反应。分析乳渣废水中可溶性化学需氧量（SCOD）、蛋白质、多糖、挥发性短链脂肪酸（SCFAs）、水解酶（蛋白酶、α-葡萄苷酶）和辅酶420、NH4+-N及PO43--P指标的变化。研究发现,中性产酸系统中水解酶活性较高,蛋白质和多糖等物质水解性能较好,使乳渣废水产酸性能最佳,最大SCFAs积累量为12 328.37 mg-COD·L-1。自然发酵产酸系统中水解酶活性最低,系统中残留大量的蛋白质和多糖等物质,最低SCFAs积累量为4 322.61 mg COD·L-1。同时发现,3个发酵系统中挥发性短链脂肪酸酸成分具有显著差别,其中自然型发酵系统乙酸积累率最大,可达69.70%,中性发酵系统丙酸积累率最大可达49.27%,填料型发酵系统正丁酸积累率最大可达38.85%。     

水热+厌氧消化对污泥碳、氮、磷溶出的影响

研究了水热预处理和厌氧消化联合作用时温度对污泥中碳、氮、磷溶出的影响。结果表明:水热处理温度越高越有利于污泥中碳氮磷的溶出,当水热温度为200 ℃时,SCODCr的溶出率较原泥提高了5.9倍;氨氮和总氮的溶出率分别提高了7.2和8.7倍;磷酸根和总磷的溶出率分别提高了0.2和6.1倍。厌氧消化后污泥中碳磷浓度下降,而氮浓度上升。厌氧消化后累积产气量与水热温度有关:当温度为160 ℃时,最大累积产甲烷量为12 223 L/mg-CO D C H 4 (以每mg COD的产甲烷量计),较原泥提高了14.5倍。根据试验结果,提出了从水热和厌氧消化污泥中回收氮磷的策略,即水热处理污泥后可在污泥清液中投加镁源进行磷的回收,厌氧消化中溶出的氮可通过加入吸附材料进行吸附回收。在污泥中氮磷资源回收的同时,可通过水热过程提高污泥厌氧过程中累积产甲烷量。     

Roles of acid-producing bacteria in anaerobic digestion of waste activated sludge

Three acid-producing strains, AFB-1, AFB-2 and AFB-3, were isolated during this study, and their roles in anaerobic digestion of waste activated sludge (WAS) were evaluated. Data of 16S rRNA method showed that AFB-1 and AFB-2 were Bacillus coagulans, and AFB-3 was Escherichia coli. The removal in terms of volatile solids (VS) and total chemical oxygen demand (TCOD) was maximized at 42.7% and 44.7% by inoculating Bacillus coagulans AFB-1. Besides, the optimal inoculum concentration of Bacillus coagulans AFB-1 was 30% (v/v). Solubilization degree experiments indicated that solubilization ratios (SR) of WAS reached 20.8%±2.2%, 17.7%±1.48%, and 11.1%±1.53%. Volatile fatty acids (VFAs) concentrations and compositions were also explored with a gas chromatograph. The results showed that VFAs improved by 98.5%, 53.0% and 11.6% than those of the control, respectively. Biochemical methane potential (BMP) experiments revealed that biogas production increased by 90.7% and 75.3% when inoculating with Bacillus coagulans AFB-1 and AFB-2. These results confirmed that the isolated acid-producing bacteria, especially Bacillus coagulans, was a good candidate for anaerobic digestion of WAS.

Open image in new window

     

牛粪厌氧发酵的载体筛选试验研究

为了提高厌氧发酵装置的效率,人们研究了各种各样的方法和措施,其中应用填料或载体使生物菌能够延长驻留期是其中的方法之一,开展载体筛选及其结构设计在厌氧发酵装置中的试验,有助于对此问题的深入研究以及将其成果应用于生产实践。通过静态载体筛选试验选择了玻璃纤维作为载体、PVC塑料管作为载体骨架制成的装置在动态序批式厌氧发酵装置中进行了试验。结果表明：此载体骨架结构对于牛粪动态厌氧发酵具有明显的提高产气效率、改变产气质量和促进有机物转化为挥发性脂肪酸的作用。     

Microprofiles of activated sludge aggregates using microelectrodes in completely autotrophic nitrogen removal over nitrite (CANON) reactor

Microsensor measurements and fluorescence in situ hybridization (FISH) analysis were combined to investigate the microbial populations and activities in a laboratory-scale sequencing batch reactor (SBR) for completely autotrophic nitrogen removal over nitrite (CANON). Fed with synthetic wastewater rich in ammonia, the SBR removed 82.5±5.4% of influent nitrogen and a maximum nitrogen-removal rate of 0.52 kgN·m⁻³·d⁻¹ was achieved. The FISH analysis revealed that aerobic ammonium-oxidizing bacteria (AerAOB) Nitrosomonas and anaerobic ammonium-oxidizing bacteria (AnAOB) dominated the community. To quantify the microbial activities inside the sludge aggregates, microprofiles were measured using pH, dissolved oxygen (DO), NH4+, NO2− and NO3− microelectrodes. In the outer layer of sludge aggregates (0–700 μm), nitrite-oxidizing bacteria (NOB) showed high activity with 4.1 μmol·cm⁻³·h⁻¹ of maximum nitrate production rate under the condition of DO concentration higher than 3.3 mg·L⁻¹. Maximum AerAOB activity was detected in the middle layer (depths around 1700 μm) where DO concentration was 1.1 mg·L⁻¹. In the inner layer (2200–3500 μm), where DO concentration was below 0.9 mg·L⁻¹, AnAOB activity was detected. We thus showed that information obtained from microscopic views can be helpful in optimizing the SBR performance.     

微波密封消解法快速测定CODcr

标准法──重铬酸钾法测定ＣＯＤＣｒ的缺点是测定时间长，氯离子干扰大。微波密封消解法对此进行了改进。实验结果表明，该法具有消解时间短，减轻了二次污染，准确度高，精密度好等优点，可同标准回流法等效使用。     

高温/中温两相厌氧消化反应中有机酸的变化

为了深入考察高温／中温两相厌氧消化的反应器系统用以处理混合基质时有机酸的变化特性,采用蒸馏－滴 测定挥发有机酸总量,并在系统达到相对稳定时用色质联机确定有机酸的组成及各自含量。研究结果表明,混合基质经高温消化后挥发有机酸含量有所增加,平均在３４６－５５２９ｍｌ／Ｌ,进一步经中国消化且系统达到稳定后其含量平均为４３－４３３ｍｇ／Ｌ,乙酸,丙酸,丁酸和戊酸是进料混合基质和高温消化后基质中主要有机酸种类     

好氧及厌氧固定化微生物处理能力的比较研究

以聚乙烯醇（ＰＶＡ）为包埋剂,分别包埋固定活性污泥及厌氧污泥进行了对废水中有机物的好氧及厌氧降解试验,比较了固定化及未固定的污泥,固定化活性及厌氧污泥对废水处理力。结果表明,固定化污泥的容积负荷是未固定的污泥的１．３－２．１倍,在试验条例上,固定化厌氧污泥与自由厌氧污泥的容积负荷比（２．１３）明显高于固定化活性污泥下自由活性污泥的比值（１．３０－１．５４）。综合污泥负荷及单位污泥产气量,说明固定化     

进口与国产COD消解测定仪测定废水COD的比对研究

应用消解分光光度法,比对了一款进口仪器和一款国产仪器应用于实际水样中COD含量测定的差异性。通过精密度、回收率、方法比对等实验分析得出,2款仪器应用电热消解分光光度法测定COD,实验结果与国标回流滴定法的实验结果基本一致,无显著性差异,具有可比性,可广泛用于水质评价和环境监测。与国产仪器相比,进口测定仪具有较小的偏差,较高的回收率。国产测定仪偏差较大的原因主要在于其比色装置,而不是用于前处理的消解装置。比较分析了2款仪器的购买和使用经济成本,为广大企事业及科研单位选用COD消解测定仪提供了有价值的基础数据和参考建议。