Dechlorination of 1,2,4-trichlorobenzene in the sediment of Ise Bay

The relation between dechlorination activities of 1,2,4-trichlorobenzene and anaerobic microbial activity were studied in the sediment collected at three sites in Ise Bay in Japan. The degradation rate of spiked 1,2,4-trichlorobenzene (3nmol ml⁻¹) ranged from 15 to 35 pmol day⁻¹ ml⁻¹ wet sediment and about 1/3 to 1/2 of degraded the trichlorobenzene was recovered as dechlorinated products. Among the dichlorobenzenes, the 1,2-isomer had the highest and 1,3-isomer had the lowest production rate. Comparing the three sampling sites, the trichlorobenzene degradation and dichlorobenzenes production rates were related to the sulfate reducing activity for the unit number of sulfate reducing bacteria. Production rates of dichlorobenzenes were completely inhibited by adding molybdate (20 mM), nitrate (60 mM), and formaldehyde solution (4 %). These results indicated that dechlorination activity in the Ise Bay sediment was supported by sulfate reduction activity in the sediment, and not supported by any other anaerobic microbial activity.     

丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯的合成与螯合性能研究

用2,3-二羟基苯甲酸经羟基保护、酰胺化、酯化和去保护4步反应,生成一种新型的四齿丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯配体.采用傅里叶变换红外光谱(FT-IR)、紫外-可见光谱(UV-Vis)、核磁共振氢谱(1H NMR)、核磁共振碳谱(13C NMR)和质谱(MS)对其结构进行了表征.在中性pH值条件下,研究了这种配体对铀酰离子的络合能力.结果表明,丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯配体与铀酰离子的螯合常数为23.2.     

Acid-assisted hydrothermal synthesis of nanocrystalline TiO2 from titanate nanotubes: Influence of acids on the photodegradation of gaseous toluene

In order to efficiently remove volatile organic compounds (VOCs) from indoor air, onedimensional titanate nanotubes (TiNTs) were hydrothermally treated to prepare TiO₂ nanocrystals with different crystalline phases, shapes and sizes. The influences of various acids such as CH₃COOH, HNO₃, HCl, HF and H₂SO₄ used in the treatment were separately compared to optimize the performance of the TiO₂ nanocrystals. Comparedwith the strong and corrosive inorganic acids, CH₃COOH was not only safer andmore environmentally friendly, but also more efficient in promoting the photocatalytic activity of the obtained TiO₂. Itwasobserved that the anatase TiO₂ synthesized in 15 mol/L CH₃COOH solution exhibited the highest photodegradation rate of gaseous toluene (94%), exceeding that of P25 (44%) by a factor ofmore than two. The improved photocatalytic activity was attributed to the small crystallite size and surface modification by CH₃COOH. The influence of relative humidity (20%-80%) on the performance of TiO₂ nanocrystals was also studied. The anatase TiO₂ synthesized in 15 mol/L CH₃COOH solution was more tolerant tomoisture than the other TiO₂ nanocrystals and P25.     

磁性污泥基生物炭对Pb2+的吸附性能

为克服湿法制备磁性生物炭颗粒时团聚严重、固液分离困难、热解前需消耗大量能源脱水干化的问题,本研究以市政污泥为原料,通过无溶剂法热解制备了磁性污泥基生物炭(MSBC-2),并利用SEM、FTIR、XPS、VMS和Raman等方法对产物的表面结构与特征进行了表征。基于序批实验,分析了pH、温度、背景离子强度、生物炭投加量对该吸附材料的Pb²⁺吸附性能的影响,并进行了吸附动力学、吸附等温线及吸附热力学研究。结果表明：MSBC-2的Pb²⁺去除率随pH及温度的升高而升高,pH>4后去除率基本不变,离子强度对Pb²⁺去除率基本无影响。MSBC-2对Pb²⁺的吸附行为符合准二级动力学模型及Langmuir模型,表明吸附过程的限速步骤为化学反应,吸附为单分子层吸附;MSBC-2的反应速率常数k₂是未改性生物炭的4.1倍,25 ℃时最大理论吸附容量为113.36 mg·g⁻¹,高于大多数湿法制备的磁性生物炭;该吸附过程非自发、吸热且熵增过程;MSBC-2对Pb²⁺的吸附机理主要包括表面络合、离子交换和物理吸附。     

Mn-Ce复合金属氧化物催化氧化甲苯性能

通过等体积浸渍法制备了一系列Mn-Ce/γ-Al₂O₃催化剂, 并考察不同CeO₂负载量对MnO₂/γ-Al₂O₃催化剂催化氧化甲苯性能的影响。利用XRD、N₂吸脱附曲线、TEM、H₂-TPR、XPS和O₂-TPD等方法表征催化剂比表面积、表面形貌及氧化还原性能。结果表明,CeO₂的负载一定程度上降低了MnO₂/γ-Al₂O₃催化剂的比表面积, 且催化剂仍保持介孔结构。CeO₂的存在增加了催化剂表面的化学吸附氧含量,其良好的储放氧能力促进了Mn³⁺向Mn⁴⁺的转化;Mn和Ce之间存在较强的协同作用, 与MnO_x相邻的CeO₂更容易打开Ce—O键释放活性氧, 加速氧化还原进程,Mn_0.6Ce_0.4/γ-Al₂O₃催化剂T₁₀和T₉₀与MnO₂/γ-Al₂O₃催化剂相比分别降低20和40 ℃。本研究可为VOCs催化氧化技术中低成本金属催化剂的开发提供参考。     

Biodegradation of 2,4,6-trichlorophenol in the presence of primary substrate by immobilized pure culture bacteria

In this study, pure strains that are capable of utilizing 2,4,6-trichlorophenol have been isolated from the mixed culture grown on substrates containing chlorophenolic compounds. Studies have been carried out on the capability of these isolated pure strains in suspended and immobilized forms to decompose 2,4,6-trichlorophenol. Additionally, the influence of primary substrates (e.g., phenol, 2-chlorophenol, 3-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol) on the decomposition of 2,4,6-trichlorophenol by the isolated pure strains grown in immobilized form is also investigated. The results are: Through bacterial isolation and identification, three pure strains have been obtained: Pseudomonas spp. strain 01, Pseudomonas spp. strain 02 and Agrobacterium spp. Whether in suspended or immobilized forms, all strains have poor removal efficiencies of 2,4,6-trichlorophenol. However, addition of 200 mg/l phenol will enable the immobilized Pseudomonas spp. strain 01, and Pseudomonas spp. strain 02 to achieve 65% and 48% removal of 2,4,6-trichlorophenol, respectively. Addition of phenol will assist the immobilized Pseudomonas spp. strain 02 in achieving removal of 2,4,6-trichlorophenol but the removal efficiency is not good if the phenol concentration is too low. The optimum phenol concentration should be between 200 and 400 mg/l.     

基于碳源储存的污水生物脱氮除磷效率及污水处理系统延伸成本分析

以我国北方某改良型A²/O工艺 (设计规模6×10⁴ m³·d⁻¹) 为例,基于一年的运行数据,考察碳源储存与生物脱氮除磷能力之间的关系,分析碳源利用效率和能耗情况。结果表明：在7—9月,系统碳源的综合利用效率为53%~55%,这说明消耗的碳源中超过50%比例用于生物脱氮除磷;反硝化菌较聚磷菌对环境的变化更敏感;外加碳源的延伸成本占直接成本的20.5%。因此,污水处理厂应充分考虑进出水水质及环境条件变化对碳源有效利用的影响。本研究结果可为减污降碳协同增效背景下城市污水处理厂A²/O工艺及其他常规工艺的优化调控提供参考。     

新生态MnO2吸附法处理水溶性阴离子染料废水的研究

研究了各种水溶性阴离子染料在新生态MnO2表面的脱色作用。结果表明,9种不同模拟染料废水(包括直接染料、酸性媒介染料、活性染料)的脱色效果均十分显著．且脱色过程受pH的影响较大。另外。通过CHN元素分析、差热分析、紫外光谱及滴定分析等测试手段．初步认为在酸性介质下．新生MnO2质子化的表面可以吸附阴离子型染料,从而将其去除。     

负载型纳米CuO/MnO2催化剂的制备及催化氧化深度处理印染废水

以酸改性凹凸棒土(ATP)为载体,活性炭为添加剂,制备负载铜、锰过渡金属氧化物的凹凸棒土-活性炭催化剂。以印染废水生化处理后出水的COD和色度为处理对象,考察了不同的催化氧化条件,即凹凸棒土与活性炭的比例、pH、H2O2和催化剂的投加量对印染废水深度处理效果,并利用SEM、XRD对催化剂进行表征。结果表明:在室温25 ℃时,催化剂载体中凹凸棒土与活性炭的比例为2∶1,H2O2加入量为理论加入量的2倍,即2.4 mL·L-1,pH值为4,催化剂的使用量为15 g·L-1时,COD和色度的去除率最佳,分别达到93%和90%。扫描电镜结果表明铜、锰以颗粒的形式负载在催化剂的表面,XRD结果表明在催化剂载体表面,活性组分的存在形式为CuO、MnO2。