炼油污水的深度处理

对炼油污水深度处理常用技术——过滤、膜分离、化学氧化技术进行了详细的论述，并结合中试试验，对动态砂滤系统、PAN膜处理系统和高级氧化系统处理炼油厂二级排放水的适用性进行了论证。     

客户关系生命周期管理及其策略

客户关系生命周期理论的提出对服务经济时代的企业产生了巨大的影响,该理论在强调了客户关系存在周期性的同时,也提出了对客户关系应当进行阶段性管理;阐述了客户关系生命周期理论,并在此基础上提出了客户关系动态发展模型,旨在帮助管理人员更清楚地认识到客户关系的长期价值和对客户关系的各个阶段进行良好的管理.     

A mathematical model of crevice corrosion for buried pipeline with disbonded coatings under cathodic protection

Crevice corrosion occurs in a holiday and disbonded region between coating and pipeline steel. Cathodic protection (CP) is generally recognized as the most effective method for corrosion prevention of pipeline, but its effectiveness may be reduced at defects in a disbonded coating. It is difficult to measure and probe corrosion parameters accurately based on experimental work. Therefore, a mathematical model is necessary to identify the phenomena and mechanisms that contribute to the crevice corrosion process. In this work, a mathematical model was developed to determine the evolution of chemical and electrochemical transient processes of crevice corrosion in NaCl dilute solution, and the effect of cathodic protection and crevice width on corrosion of 20# steel pipeline with disbonded coatings. Results have demonstrated that the extent of crevice corrosion depends on the crevice geometry and could be influenced by the increase of crevice depth and decrease of its width. The oxygen concentrations drop significantly inside a crevice whether CP is applied or not and whether crevice width decreased or not. The pH values and conductivity of crevice solution increase with the time. The research provides a theoretical foundation for cathodic protection of pipelines and establishes an effective corrosion model which can identify the phenomena and mechanisms of the crevice corrosion process. This work could be used to help mitigate the corrosion failure of pipelines to prevent catastrophic accidents in oil, gas and chemical process industries.     

Using empirical models of species colonization under multiple threatening processes to identify complementary threat‐mitigation strategies

Approaches to prioritize conservation actions are gaining popularity. However, limited empirical evidence exists on which species might benefit most from threat mitigation and on what combination of threats, if mitigated simultaneously, would result in the best outcomes for biodiversity. We devised a way to prioritize threat mitigation at a regional scale with empirical evidence based on predicted changes to population dynamics—information that is lacking in most threat‐management prioritization frameworks that rely on expert elicitation. We used dynamic occupancy models to investigate the effects of multiple threats (tree cover, grazing, and presence of an hyperaggressive competitor, the Noisy Miner (Manorina melanocephala) on bird‐population dynamics in an endangered woodland community in southeastern Australia. The 3 threatening processes had different effects on different species. We used predicted patch‐colonization probabilities to estimate the benefit to each species of removing one or more threats. We then determined the complementary set of threat‐mitigation strategies that maximized colonization of all species while ensuring that redundant actions with little benefit were avoided. The single action that resulted in the highest colonization was increasing tree cover, which increased patch colonization by 5% and 11% on average across all species and for declining species, respectively. Combining Noisy Miner control with increasing tree cover increased species colonization by 10% and 19% on average for all species and for declining species respectively, and was a higher priority than changing grazing regimes. Guidance for prioritizing threat mitigation is critical in the face of cumulative threatening processes. By incorporating population dynamics in prioritization of threat management, our approach helps ensure funding is not wasted on ineffective management programs that target the wrong threats or species.     

基于主成分分析法的陕北地区可持续发展对比研究

基于可持续发展基本理论,选取60项指标建立陕北地区可持续发展评价指标体系,采用软件SPSS(19.0)进行主成分分析,分别对延安市、榆林市2000—2014年的可持续发展水平、可持续发展潜力和可持续发展协调度进行动态对比分析。结果表明延安市、榆林市发展基本趋于一致:可持续发展水平较高,但可持续发展潜力明显不足,可持续发展协调度较低;制约其可持续发展的主要因素在于资源发展动力不足、产业结构单一、环境的恶化及治理的低效。     

军绿有机涂层和金属漆涂层全浸泡下的腐蚀行为对比研究

目的针对车辆装备长期在高盐雾、高湿热、高日照等恶劣的气候环境下使用,会受到腐蚀影响的现状,探究现役军用有机涂层防护性能。方法采用电化学阻抗谱技术研究军绿有机涂层和金属漆涂层在3.5%NaCl溶液中的腐蚀电化学行为,分析这两种涂层在浸泡期间的电化学阻抗谱特征,通过拟合等效电路得到涂层电阻R_c和涂层电容C_c,并用这两个电化学参数评价军绿有机涂层和金属漆涂层的耐蚀性能。结果军绿有机涂层抗腐蚀介质渗透能力很强,而金属漆涂层抗腐蚀介质渗透能力稍弱。结论两种涂层都表现出很好的防护性能,且金属漆涂层在腐蚀后期的防护性能要优于军绿有机涂层。     

海洋环境下ZL115-T5铸铝合金/C41500海军黄铜腐蚀行为研究

目的研究海军某型装备壳体结构材料在海洋环境下的腐蚀行为及规律。方法根据折算出的实验室加速腐蚀试验环境谱,开展了ZL115-T5铸铝合金试验件、ZL115-T5铸铝合金/C41500海军黄铜接触试验件、模拟实际涂抹黄油试验件以及模拟维护涂抹缓蚀剂试验件的实验室加速腐蚀试验。结果得到了该型铝合金在不同服役年限及服役状态下的腐蚀形貌、质量、平均腐蚀深度以及腐蚀损伤度变化规律。结论该型合金在不同服役状态下的腐蚀行为呈现差异化,ZL115-T5铸铝合金与C41500海军黄铜偶合接触会加速铸铝合金的腐蚀,黄油能够在一定程度上抑制电偶腐蚀,但效果并不明显。缓蚀剂能够延缓海洋环境下ZL115-T5铸铝合金腐蚀,其中THFS-10软膜缓蚀剂以及THFS-15长效硬膜缓蚀剂效果较好。     

富营养化淡水中黑色金属试样腐蚀加速的微生物学机制研究

目的探究黑色金属在污染淡水中后期腐蚀加速规律的生物学机制。方法采用高通量测序分析A3钢在富营养化水体和清洁水体中腐蚀产物内微生物的种群结构,并结合元素分析和XPS分析。结果获得了A3钢的腐蚀产物内微生物的门水平物种分布柱状图、OTU估计数统计表、OTU韦恩图、硫酸盐还原菌各属的相对丰度、微生物属水平热图等数据。结论在富营养化水体中,硫酸盐还原菌呈现更显著的水平,造成金属的硫化腐蚀更为严重,验证了黑色金属在富营养化污染淡水水体中后期腐蚀速率反转加速的现象。     

三种流速下高强钢与微弧氧化钛电偶腐蚀研究

目的研究三种流速下微弧氧化钛和高强钢的电偶腐蚀行为。方法在面积比为1:1情况下进行1,3,7 m/s流速下的电化学测试和电偶腐蚀试验研究。结果随着流速的增大,偶合电流、总腐蚀速率和电偶腐蚀速率增大。当流速为7 m/s时,高强钢总腐蚀速率和电偶腐蚀速率分别达到8.64 mm/a和0.39 mm/a,与静态相比分别增大146倍和15.6倍,与1 m/s流速下相比分别增大8.6倍和5倍。结论在面积比为1:1时,冲刷腐蚀速率远大于电偶腐蚀速率。     

某型机襟翼舱下壁板蒙皮腐蚀原因分析与修理措施研究

目的研究某型机襟翼舱下壁板蒙皮产生腐蚀损伤的原因,分析腐蚀危害性,制定腐蚀修补方案,提出后续腐蚀防护与控制的建议措施。方法首先现场仔细检查结构的腐蚀状况,然后分别从结构设计与选材、服役环境分析、腐蚀产物分析3个方面研究结构腐蚀产生的成因,并且针对性地制定腐蚀部位的补强修理方案。结果在襟翼舱局部高温湿热环境下形成的内部冷凝水,夹杂大气环境中的Cl~-污染侵袭,导致壁板蒙皮材料LY12铝合金产生了晶间剥落腐蚀。结论老龄飞机机体结构腐蚀成因复杂多样,准确界定腐蚀原因是制定腐蚀防护与控制措施的关键。