微生物还原Cr(Ⅵ)的机理研究进展

含铬工业废水排放到环境中会对人体的健康和环境带来严重的危害。其中重金属铬的毒性会随着价态的变化而变化。微生物在代谢过程中可以将Cr(Ⅵ)还原为Cr(Ⅲ),从而降低Cr(Ⅵ)的毒性。从微生物还原Cr(Ⅵ)的机理类型,相关还原酶的基因特性,可还原Cr(Ⅵ)的微生物,影响还原的因素,Cr(Ⅵ)还原过程中存在的问题及发展前景等方面进行了综述。     

Effect of metal ion-doping on characteristics and photocatalytic activity of TiO2 nanotubes for removal of humic acid from water

The effect of ion-doping on TiO₂ nanotubes were investigated to obtain the optimal TiO₂ nanotubes for the effective decomposition of humic acids (HA) through O₃/UV/ion-doped TiO₂ process. The experimental results show that changing the calcination temperature, which changed the weight fractions of the anatase phase, the average crystallite sizes, the Brunauer-Emmett-Teller surface area, and the energy band gap of the catalyst, affected the photocatalytic activity of the catalyst. The ionic radius, valence state, and configuration of the dopant also affected the photocatalytic activity. The photocatalytic activities of the catalysts on HA removal increased when Ag⁺, Al³⁺, Cu²⁺, Fe³⁺, V⁵⁺, and Zn²⁺ were doped into the TiO₂ nanotubes, whereas such activities decreased as a result of Mn²⁺- and Ni²⁺-doping. In the presence of 1.0 at.% Fe³⁺-doped TiO₂ nanotubes calcined at 550°C, the removal efficiency of HA was 80% with a pseudo-first-order rate constant of 0.158 min⁻¹. Fe³⁺ in TiO₂ could increase the generation of ·OH, which could remove HA. However, Fe³⁺ in water cannot function as a shallow trapping site for electrons or holes.     

电磁屏蔽针织服装屏蔽作用的影响因素及机理

本文简述了电磁辐射的危害,论述了电磁屏蔽服装的一般原理。结合前人的研究,针对针织服装特点详细分析了织物厚度、线圈长度、针织组织、服装结构设计等对屏蔽作用的影响规律及机理。最后,提出织物组织结构参数与屏蔽纤维含量、屏蔽纤维之间孔隙的关系,屏蔽纤维含量与屏蔽纤维之间孔隙的合理配置是针织物电磁屏蔽效能研究的关键。同时,进行电磁屏蔽针织服装研究时可以结合人体模型并增加服装结构研究的切入点。     

震后民用建筑重建质量监管机制研究

针对震后民用建筑重建质量监管缺失问题,从政府、社会、责任主体三维视角出发,构建了一套促进重建工程质量持续改进的监管机制,并分析该机制具有时空性、多维性、循环性三大特征。另外,为便于社会力量对震后民用建筑重建工程质量进行监督,构建了一套针对非专业人员的工程质量评价指标体系,并利用模糊综合评价法,通过实例验证了该指标体系的有效性。最后,提出了优化该质量监管机制的建议。     

水泥灰三相泡沫的形成机理与稳定性试验研究

针对高硫矿石容易发生氧化自燃的危险,通常的灌浆、注砂、注惰气和喷洒阻化剂等技术还存在一些不足,提出一种以水泥灰为基料的三相泡沫来预防硫化矿石自燃的新技术。该技术是将水泥灰和水按一定的比例混合,同时加入一定比例的发泡剂和稳泡剂后,经物理机械方式发泡形成,集固、液、气三相材料的防灭火性能与一体。理论分析了水泥灰三相泡沫的形成与衰变机理,并通过正交试验,对三相泡沫的发泡倍数与半衰期进行研究,最后采用单因素实验,定量分析灰水质量比,发泡剂和稳泡剂浓度对三相泡沫稳定性能的影响,得到最佳泡沫配方。结果表明:当灰水质量比为1:5,发泡剂浓度为5g/L,稳泡剂浓度为8g/L时,制得的三相泡沫发泡倍数达到6倍,半衰期达到6h以上。     

崇明东滩芦苇湿地温室气体排放通量及其影响因素

通过静态箱-气相色谱法对崇明东滩芦苇群落在生长周期内的3种温室气体——CH₄、N₂O和CO₂的排放、吸收特征进行研究. 结果表明:芦苇群落湿地CH₄排放通量受温度影响较大,夏季排放通量明显高于其他季节,年均排放通量为74.46μg/(m2·h);N₂O年均排放通量为2.22μg/(m2·h),冬季排放通量最大;CO₂的吸收率季节变化明显,年均排放通量为-101.93mg/(m2·h). 温度、芦苇植株光合作用及呼吸作用是影响CH₄产生和排放的主要因素;而沉积物氮素不足和限制,则是促使芦苇群落表现出对N₂O吸收的原因;芦苇的光合作用及土壤呼吸作用随温度和季节的变化是控制芦苇湿地CO₂的排放和吸收的主要因素. 芦苇植株发达的通气组织是CH₄和N₂O由大气向沉积物扩散的通道,同时分子扩散过程也是沉积物产生的CH₄、N₂O和CO₂扩散到大气中的途径和方式.      

介质阻挡放电等离子体去除水中敌草隆的降解机理

研究了线筒式介质阻挡放电等离子体对水中敌草隆的降解效果,考察了不同因素对敌草隆去除效果的影响及其对敌草隆的降解机理. 结果表明:输入功率、空气流量均对敌草隆的降解产生较大影响. 输入功率为50 W、空气流量为140 L/h时,放电反应6 min敌草隆的去除率达到95.7%. 随着放电时间的增加,水溶液中测出的ρ(O₃)、ρ(H₂O₂)均明显升高,6 min后其产量分别为11.9和1.2 mg/L;放电6 min后pH从最初的6.3降至3.4,ρ(TOC)也从最初的14.2 mg/L降至11.9 mg/L. 采用离子色谱仪分析敌草隆降解过程中产生的离子发现,反应过程中ρ(Cl-)和ρ(NO₃-)呈线性增长. 采用发光细菌抑制率反映溶液毒性,放电6 min后,敌草隆溶液对发光细菌的抑制率高达90.5%,溶液毒性增大. 通过液相色谱-飞行时间质谱对敌草隆降解产物进行分析,敌草隆降解过程中中间产物的形成存在烷基氧化、脱氯羟化、脱氯羟化-烷基氧化3种途径.      

胺型腰果酚醛树脂对Ag~+的吸附

制备了3种胺型腰果酚醛树脂(二乙撑三胺型腰果酚醛树脂(PCD)、己二胺型腰果酚醛树脂(PCE)、己二胺型腰果酚醛树脂(PCH)),采用XPS(X-射线光电子能谱仪)、EA(元素分析仪)、FTIR(傅利叶变换红外光谱分析仪)等手段研究了其结构特征,并考察了其对水溶液中Ag+的吸附行为和机理.结果表明,3种树脂对Ag+有较高的吸附量和吸附作用;在pH值为5.5的条件下,树脂对Ag+的吸附效果最佳;2h内吸附达到平衡;吸附行为均符合Lagergren准二级速率方程;树脂对Ag+的吸附均符合Langmuir等温吸附方程;吸附反应为自发吸热和熵增的过程;可溶性无机盐对树脂吸附Ag+的影响不大;推测其吸附机理是树脂上胺基、羟基与Ag+发生较强的配位作用和较弱的离子交换作用的化学吸附为主.吸附Ag+后的树脂可用硝酸脱附再生;树脂循环使用4次后,吸附率和脱附率仍大于90%.     

A review on application of flocculants in wastewater treatment

Flocculation is an essential phenomenon in industrial wastewater treatment. Inorganic coagulants (salts of multivalent metals) are being commonly used due to its low cost and ease of use. However, their application is constrained with low flocculating efficiency and the presence of residue metal concentration in the treated water. Organic polymeric flocculants are widely used nowadays due to its remarkable ability to flocculate efficiently with low dosage. However, its application is associated with lack of biodegradability and dispersion of monomers residue in water that may represent a health hazard. Therefore, biopolymers based flocculants have been attracting wide interest of researchers because they have the advantages of biodegradability and environmental friendly. But, natural flocculants are needed in large dosage due to its moderate flocculating efficiency and shorter shelf life. Thus, in order to combine the best properties of both, synthetic polymers are grafted onto the backbone of natural polymers to obtain tailor-made grafted flocculants. This paper gives an overview of the development of different types of flocculants that were being investigated for treatment of industrial wastewater. Furthermore, their flocculation performance will be reviewed and the flocculation mechanism will be discussed.     

某水电站库首右岸拉裂变形体形成机理研究

某水电站库首右岸存在一个拉裂变形体,低线施工公路从陡峭拉裂变形体山坡下部通过。低线公路开挖完成后路堑边坡发生局部塌滑,于2003年5月在其上部形成浅层滑坡体(1000多方)。结合拉裂变形体的分析和治理工作,在统计分析大量勘探资料的基础上,提出了该拉裂变形体是边坡在自重应力和构造应力的复合应力场下快速却荷引起岩体的浅表生改造,形成如荷松动岩体,后期在低线公路祠室大爆破开挖施工、下部坡体切脚和基雨的影响下形成浅层滑坡体,并逐步向上扩展的形成机理。