催化技术在污染物治理应用的研究进展

对近年来催化技术在污染物治理应用的研究进展进行了综述,指出了现在研究中存在的主要问题,并对其前景进行了展望。     

废旧家电产品回收性能评价指标体系的建立

针对家电产品回收工艺流程决策评价的多阶段、多目标的特点,以及不同类型家电产品和不同回收工艺过程的动态特性,采用层次分类方法建立了以经济指标和环境指标为主要内容的回收工艺流程评价指标体系,对指标体系的组成进行了较为详细的分析,讨论了应该考虑的因素及有关计算方法。以电冰箱为例,用改进的模糊层次分析法与遗传算法相结合,介绍了回收工艺流程的优化决策方法。建立的指标体系不仅可以根据评价对象进行动态修改,而且具有较强的可操作性。     

水解-接触氧化工艺处理高浓度米果废水

采用水解—接触氧化—沉淀工艺处理高浓度米果废水，设计规模为100m^3／d。处理后的CODcr，BOD5，SS和色度的去除率分别达到96．8％，97．7％，94.4％，94．7％，总排放口水质为：pH=7．61，CODcr=70．7mg／L，BOD5mg／L，SS=29．2mg／L；色度的稀释倍数为8。     

腈纶污水的分质处理

介绍某公司腈纶污水的水质特点，处理工艺、主要设备及构筑物设计参数。该污水预处理装置运行以来，处理效果良好，符合后续生化处理的进水要求。     

ORBAL氧化沟在炼油污水处理上的应用

总结了石炼污水处理场采用ORBAL氧化沟做为二级生化处理设施的成功经验，并对ORBAL氧化沟和周边进水，周边出水二沉池的运行机理进行了说明。     

难降解有机废水处理新技术

介绍了光氧化法、超临界氧化和低温等离子体化学三种废水处理新技术的原理,国内外研究的现状和未来的发展前景,分析了这些新技术在优化污染物废水处理方面得到工业应用所必须解决的主要技术问题.     

GdFeO3上CO氧化的Redox机理动力学

ＧｄＦｅＯ３用柠檬酸络合制备。用ＸＲＤ测定ＧｄＦｅＯ３为钙钛矿结构。用ＣＯ还原脉冲及用Ｏ２再氧化脉冲证实在ＧｄＦｅＯ３上ＣＯ氧化为Ｒｅｄｏｘ机理。用外循环流动无梯度反应顺研究了ＣＯ氧化稳态动力学。用正交设计法估计动力学方程中的参数。还原催化剂再氧化为控制步骤。     

电场耦合高效液相色谱柱改善极性芳烃分离的研究

从燃烧的煤和油中排放出来的极性污染物,包含有多种含氮、氧和硫的极性多环芳烃(PAH),这些极性组分比非极性组分常具有更强的致癌和致突变性。目前,正相高效液相色谱(NP-HPLC)常被用来分离分析这类极性组分。 但是,要提高这些极性组分分离的选择性,现大多采用梯度洗脱的方法。也就是改变流动相极性的方法。本文介绍了一种高压电场耦合色谱柱的新方法。这种技术除了具     

高压脉冲电凝聚技术处理活性染料废水试验研究

难生物降解有机废水是废水处理的难点。阐述了高压脉冲电凝聚技术处理高浓度、难生物降解有机废水的最新机理。采用高压脉冲电凝聚技术处理活性染料（活性红）生产废水．研究了影响高压脉冲电凝聚技术处理活性染料废水效果的操作条件及影响因素．结果表明，在最佳处理工艺条件下。CODCr浓度12628mg／L的生产废水经处理后CODCr去除率为65％左右。再经后续混凝沉淀，最终出水CODCr可降低到1000mg／L以下。     

Comparison of UV-based advanced oxidation processes for the removal of different fractions of NOM from drinking water

This study examined the effectiveness for degradation of hydrophobic (HPO), transphilic (TPI) and hydrophilic (HPI) fractions of natural organic matter (NOM) during UV/H₂O₂, UV/TiO₂ and UV/K₂S₂O₈ (UV/PS) advanced oxidation processes (AOPs). The changing characteristics of NOM were evaluated by dissolved organic carbon (DOC), the specific UV absorbance (SUVA), trihalomethanes formation potential (THMFP), organic halogen adsorbable on activated carbon formation potential (AOXFP) and parallel factor analysis of excitation–emission matrices (PARAFAC-EEMs). In the three UV-based AOPs, HPI fraction with low molecular weight and aromaticity was more likely to degradate than HPO and TPI, and the removal efficiency of SUVA for HPO was much higher than TPI and HPI fraction. In terms of the specific THMFP of HPO, TPI and HPI, a reduction was achieved in the UV/H₂O₂ process, and the higest removal rate even reached to 83%. UV/TiO₂ and UV/PS processes can only decrease the specific THMFP of HPI. The specific AOXFP of HPO, TPI and HPI fractions were all able to be degraded by the three UV-based AOPs, and HPO content is more susceptible to decompose than TPI and HPI content. UV/H₂O₂ was found to be the most effective treatment for the removal of THMFP and AOXFP under given conditions. C1 (microbial or marine derived humic-like substances), C2 (terrestrially derived humic-like substances) and C3 (tryptophan-like proteins) fluorescent components of HPO fraction were fairly labile across the UV-based AOPs treatment. C3 of each fraction of NOM was the most resistant to degrade upon the UV-based AOPs. Results from this study may provide the prediction about the consequence of UV-based AOPs for the degradation of different fractions of NOM with varied characteristics.