窄小场地条件下柴油发电机噪声综合治理

介绍一例窄小场地条件下柴油发电机噪声综合治理工程。通过对机房实行整体封闭隔声与吸声、以消声道兼作通风道强制通风、以消声器加垃圾道消除排气噪声等综合措施 ,使柴油发电机噪声完全达到标准。     

“成型-烧结”碎磷矿的黄磷生产工业性试验

将中小黄磷企业长期堆存的碎磷矿 (粒径 <5mm) ,经过“粘接成型 烧结”及理化指标检测后 ,按烧结矿∶块矿 =1∶1入炉进行工业性试验 ,试验表明该烧结矿可用于黄磷电炉生产 ,该法是降低黄磷生产成本 ,减少环境污染 ,使资源得到合理利用的有效途径之一     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

物化——生化两级处理工艺处理粘胶纤维生产废水

介绍粘胶纤维生产废水的来源、水质特点及物化--生化两级处理工艺。给出了主要构筑物的技术参数及实际工程运行效果，并对该工艺存在的问题进行了讨论。     

流化床电偶反应器

探讨了流化床电偶反应器的工作原理 ,阐述了流化床电偶反应器的结构特点及工艺性能 ,重点介绍了该反应器对多种有机废水和重金属离子废水净化的作用。     

废旧家电产品回收性能评价指标体系的建立

针对家电产品回收工艺流程决策评价的多阶段、多目标的特点,以及不同类型家电产品和不同回收工艺过程的动态特性,采用层次分类方法建立了以经济指标和环境指标为主要内容的回收工艺流程评价指标体系,对指标体系的组成进行了较为详细的分析,讨论了应该考虑的因素及有关计算方法。以电冰箱为例,用改进的模糊层次分析法与遗传算法相结合,介绍了回收工艺流程的优化决策方法。建立的指标体系不仅可以根据评价对象进行动态修改,而且具有较强的可操作性。     

电场耦合高效液相色谱柱改善极性芳烃分离的研究

从燃烧的煤和油中排放出来的极性污染物,包含有多种含氮、氧和硫的极性多环芳烃(PAH),这些极性组分比非极性组分常具有更强的致癌和致突变性。目前,正相高效液相色谱(NP-HPLC)常被用来分离分析这类极性组分。 但是,要提高这些极性组分分离的选择性,现大多采用梯度洗脱的方法。也就是改变流动相极性的方法。本文介绍了一种高压电场耦合色谱柱的新方法。这种技术除了具     

废弃电子产品的处理与回收技术

现代电子产品更新换代速度很快，废旧电脑、电池、家电等电子垃圾的数量急剧增加，由于对环境会造成严重污染，电子垃圾作为一种特殊垃圾急待处理与回收。对几种废弃电子产品的处理与回收技术进行了综合论述，并结合我国实际，提出一些建议。     

电脉冲作用下粉体成形的研究

介绍了电脉冲对粉体成形的原理。从电迁移和电脉冲作用下的非平衡相变讨论了粉体成形的机理 ,为块状纳米材料的制备提供一个新思路     

酸性高浓度含氟废水处理技术

介绍了对某化工厂排放的酸性高浓度含氟废水进行处理的试验，采用石灰中和沉淀，氯化钙（或聚丙烯酰胺）二级絮凝沉淀，砂滤工艺进行处理，操作控制条件如下：pH为8－9，Ca^2 与F^-的摩尔比为3．0，聚丙烯酰胺投加量为2mg/L，沉淀时间为1h，处理工程运行后的验收监测结果表明，出水中的残氟浓度可以达到国家规定的一级排放标准，且系统运行稳定，工艺简便。