复合材料静态处理煤矿高浓度含锰废水的研究

针对目前云南省某煤矿排放废水中Mn~(2+)超标的问题,利用一种新型复合材料进行除锰试验.该复合材料是纳米分子筛与硅藻土经合理复配后,掺入复配絮凝荆形成的.试验中优化了不同材料的复合方式、絮凝剂的复配比例与用量.利用复配的多孔材料,对云南某煤矿含有大量悬浮物、Mn~(2+)质量浓度为5.32 mg/L的黑色废水及Mn~(2+)质量浓度为42.mg/L的红褐色废水进行了Mn~(2+)去除效果研究.结果表明,黑色废水中Mn~(2+)去除率达到70%,出水pH值为7.9;红褐色废水中Mn~(2+)去除率达到91.0%,出水pH值为7.1.与此同时,还研究了废水中Fe~(3+)、固体悬浮物(SS)对Mn~(2+)去除效果的影响,废水中Fe~(3+)的存在使pH降低,并与Mn~(2+)产生竞争吸附,对复合材料除锰有不利影响,而SS的存在对Mn~(2+)的去除效果没有显著的影响.     

刚性桩复合地基的理论、实测与安全性研究

科学合理的设计理论是工程安全性和经济性的保障,现场监测是确保工程安全和质量最有效的手段。本文以提高刚性桩复合地基工程的安全性为目的,围绕关乎建筑物安全的“沉降量”等参数指标,从设计理论与试验监测两个方面开展研究。本文完善了刚性桩复合地基的设计理论,通过现场监测试验取得了第一手的数据资料,可作为今后类似工程的设计和施工参考。本研究为进一步提高刚性桩复合地基的安全性提供了理论和实践保障。     

Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

Photocatalytic remediation of γ-hexachlorocyclohexane contaminated soils using TiO2 and montmorillonite composite photocatalyst

TiO2 and montmorillonite composite photocatalysts were prepared and applied in degrading γ-hexachlorocyclohexane(γ-HCH)in soils.After being spiked with γ-HCH,soil samples loaded with the composite photocatalysts were exposed to UV-light irradiation.The results indicated that the photocatalytic activities of the composite photocatalysts varied with the content of TiO2 in the order of 10%＜70%＜50%＜30%.Moreover,the photocatalytic activity of the composite photocatalysts with TiO2 content 30% was higher than that of the pure P25 with the same mass of TiO2.The strong adsorption capacity of the composite photocatalysts and quantum size effect may contribute to its increased photocatalytic activities.In addition,effect of dosage of composite photocatalysts and soil pH on γ-HCH photodegradation was investigated. Pentachlorocyclohexene,trichlorocyclohexene,and dichlorobenzene were detected as photodegradation intermediates,which were gradually degraded with tlle phOtOdegradation evolution.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

火灾高温下CFRP加固钢筋混凝土梁温度场分析

综合国外CFRP加固混凝土结构抗火试验相关研究,总结了CFRP的高温热工性能参数。用ANSYS软件对火灾高温下不同情况(无防火保护层和有防火保护层)和不同工况(防火涂料涂抹形式)下CFRP加固后的钢筋混凝土梁进行了温度场数值模拟研究。结果表明,防火涂料厚40 mm时,梁耐火极限可达2.5小时以上,且底面和两侧面全面涂抹防火涂料的防火效果最好。本文研究有助于进一步深入认识CFRP加固钢筋混凝土结构在高温下的力学性能和耐火极限,且对CFRP加固后的结构防火设计具有一定的指导意义。     

Identifying the largest individual sample value from a two-way composite sampling design

Composite sampling techniques for identifying the largest individual sample value seem to be cost effective when the composite samples are internally homogeneous. However, since it is not always possible to form homogeneous composite samples, these methods can lead to higher costs than expected. In this paper we propose a two-way composite sampling design as a way to improve on the cost effectiveness of the methods available to identify the largest individual sample value.     

钙钛矿型催化剂催化湿式氧化处理煤气化废水纳滤浓缩液

采用溶胶-凝胶法制备了Mn掺杂钙钛矿型催化剂LaFexMn1-xO3,并以其为催化剂催化湿式双氧水氧化处理煤气化废水纳滤浓缩液。采用XRD,SEM,FTIR技术对催化剂进行了表征。表征结果显示：制备的催化剂均具有标准的钙钛矿型结构,其中,LaFe0.9Mn0.1O3的结构稳定,比表面积大。实验结果表明：制备的催化剂中LaFe0.9Mn0.1O3的催化活性最高,且稳定性好,连续使用5次后催化活性未见明显减弱;在H2O2投加量3.0 g/L、n（H2O2）∶n（LaFe0.9Mn0.1O3）=12∶1、反应温度160 ℃、反应压力1 MPa、浓缩液pH 3、反应时间60 min的最优条件下,COD、UV254和TOC的去除率分别达到80.9%、95.2%和68.0%,BOD5/COD由0.02提升至0.40,可生化性大幅提高。     

聚氯化铝/聚丙烯酰胺复合絮凝剂处理染料废水的研究

研究了聚氯化铝-Fe_3O_4-聚丙烯酰胺复合絮凝剂对硫化黑染料废水的去除效果。研究结果表明,该复合絮凝剂对硫化黑染料废水具有较好的絮凝效果,在絮凝剂投加量为20 mg/L、废水pH值为8.0的条件下,该复合絮凝剂对硫化黑染料废水的浊度、色度、COD的去除率分别为95.59%,97.67%,85.55%。     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.