余热利用低低韫电除坐技术在燃煤电厂的应用

论述并总结了余热利用低低温电除尘技术在新昌某电厂700MW机组燃煤锅炉上的应用情况,指出采用该技术是燃煤电厂进一步减排节能的有益尝试。     

Success factors and barriers in re-use of electrical and electronic equipment

This paper aims to identify specific and generic success factors and barriers in the re-use of electrical and electronic equipment for a variety of different operating models. The scope of the study is information and communication technologies (ICT) and large household appliances. Success factors and barriers for re-use were identified through the conducting of semi-structured interviews with 28 case study partners representing the different models. A list of generic success factors and barriers was identified. From this generic list, the re-use success factors and barriers were ranked by the interviewees with regards to their importance. On the one hand, the difficulty in accessing sufficient volumes of good quality used equipment and the lack of legislations, which support, incentivize and – if necessary – enforce this access, were identified as most impactful barriers. On the other hand, the control and securing of product and process quality were ranked as most important success factors. Re-use organisations, which adhere to good re-use practices, differentiate themselves through quality guarantee from non-compliant, informal competitors. Moreover, proven quality strengthens confidence in re-use of important stakeholders like suppliers, customers, authorities and the general public. Differences in reuse barriers and success factors were also explored for varying geographical regions, product category and operating models.     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

电捕焦油器安全运行条件

为避免焦化企业化产回收工艺中焦炉煤气含焦油雾较高,可能影响后序工艺产品质量或操作,同时,造成安全隐患,目前,国内大型焦化企业普遍采用电捕焦油器,以有效清除焦油雾。但电捕焦油器在运行过程中,若控制不当极易发生火灾爆炸事故。通过介绍电捕焦油器的工作原理,分析电捕焦油器运行过程中所涉及的危险物质及运行中可能发生的火灾爆炸危险,结合火灾爆炸三要素及生产过程中遇到的实际问题,依据《焦化安全规程》（GB12710）,从激发能源、煤气中含氧量的控制入手,阐述电捕焦油器安全运行条件。     

我国电子废弃物处理产业现状与前景探讨

电子废弃物处理产业是伴随我国近年来社会经济快速发展而产生的一个新兴产业。本文分析了电子废弃物的经济价值、处理技术和产业政策,并对我国电子废弃物处理产业的现状与前景进行了探讨。     

节能控制系统在220MW机组电除尘上的应用

介绍了新型电除尘节能技术的原理及技术特点,以及该节能技术在山西某热电公司1、2号炉220MW机组电除尘器上的改造与应用情况。     

航空电连接器海洋环境加速试验与腐蚀仿真研究

目的 通过加速试验和有限元仿真,研究航空电连接器在南海岛礁服役条件下的失效行为和腐蚀机理.方法 根据典型航空装备南海服役环境数据,设计海洋环境加速腐蚀试验环境谱,基于此环境谱开展航空电连接器在实验室加速试验条件下的外观腐蚀、接触电阻、绝缘电阻和耐压强度的变化行为和机理研究.重点分析接触电阻变化原因,并基于水平集方法,建立插针插孔结合处的COMSOL有限元腐蚀仿真模型,模拟和验证接触件的腐蚀行为和机理.结果 3种规格的电连接器均发生壳体腐蚀,但程度不同,其中不锈钢壳体电连接器壳体腐蚀最轻,但壳体内部金属卡圈腐蚀最严重,其接触电阻波动最大.所有电连接器的耐压强度和绝缘电阻均有明显减小.结论 导致接触电阻增加的直接原因是插针和插孔结合处的毛细区内发生了严重腐蚀.有限元模型复现了腐蚀界面发展和腐蚀产物沉积过程.     

电法填埋场渗漏检测供电电极接地电阻研究

采用电法进行垃圾填埋场渗漏检测时,供电电极的接地电阻对回路电流起决定性作用.分别推导了半球状供电电极和圆柱状供电电极的接地电阻表达式,并对影响接地电阻大小的主要因素进行了分析和试验验证.结果表明:①电极的接地电阻主要由电极附近的土壤电阻决定;②随着电极埋深的增加,电极的接地电阻减少,但当埋深超过40 cm时,随着电极埋深的增加,电极接地电阻的减小趋势变缓;③随着电极直径的增加,电极的接地电阻减少.实际应用中,电极的埋深和直径应尽可能大一些,但电极直径较大时,电极质量也会显著增加,给操作带来不便.因此,可将电极直径定为10～15 cm.此外,由于土壤一般为颗粒状,这使得土壤和电极不能完全接触,为降低接地电阻,可对电极附近的土壤进行浇水.      

过电流故障铝导线熔痕部位与组织特征关联性研究

为深入研究过电流故障铝导线熔痕部位与组织特征之间的关联关系,本文模拟2.5 mm²BLV铝导线通25～187.5 A电流时的发热、熔断和燃烧过程,研究过电流铝导线发热形变与熔痕形成的内在关联,根据各部位熔痕受热形成过程,分类识别典型组织特征。研究结果表明:随着电流值升高,铝导线先后出现线芯发热、绝缘热解、熔断拉弧、绝缘燃烧、重力折断等现象,发生熔断拉弧的临界电流值位于[71.5,73)A区间内;重力折断痕迹和导线本体组织受线芯发热和绝缘燃烧的共同影响,组织为粗大的块状晶,折断点为锯齿状寸断痕迹;熔断电弧熔痕为高温电弧作用于熔化金属后凝固形成,呈树枝状、纤维状铸态组织,分区分布,孔洞较少,表现为圆珠状、钝头状、尖头型、弯折状、牵拉状等5种典型形貌。通过建立熔痕部位与组织特征的关联,增加故障判断证据维度,为准确识别铝导线发生过电流故障及溯源起火过程提供数据支持。     

着床后引燃对电弧迸溅熔珠组织特征的影响

为探究迸溅熔珠着床后的热交换过程对其组织特征的影响,建立基于着床后高温迸溅熔珠的动态测温方法,从而揭示迸溅熔珠着床后引燃与否对其组织特征形成的影响规律。研究结果表明：引燃可燃物的熔珠受火焰热反馈和铜氧化放热的共同作用,着床后其温度出现反复波动,延长迸溅熔珠的冷却凝固时间,组织呈等轴状;无法引燃可燃物的熔珠在可测范围内,短暂升温后降温速率持续上升,组织更易呈现树枝状或胞状。研究结果可为准确认定电气故障电弧迸溅熔珠引发火灾提供技术支持。