海滨核电建造期可剥涂层的临时防护性能研究

目的 考察可剥涂层在海洋大气环境下的大型工程建造中的临时防护作用。方法 对来自两个厂家的可剥涂层进行了为期12周的耐候性试验,对可剥涂层在不锈钢及碳钢/环氧两种基底上的可剥离性、防护性和氟氯残留量进行了测试。结果 两个厂家的涂层在外观、耐蚀性、附着力等方面的试验结果没有明显差异,涂层的剥离强度均低于0.05 kN/m,涂层剥离后不锈钢表面的氟氯离子残留量远低于15 ?g/dm2,试验周期内环氧漆色差变化较小。结论 两个厂家的可剥涂层在光泽、硬度和剥离强度等测试方面的结果上存在差异,但对环氧漆均有着较好的防护作用,试验期内剥离性良好,且无有害化学元素残留,具有较高的工程应用价值。     

基于多元随机效应Wiener过程的某弹用弹簧可靠性评估

目的 解决某弹用弹簧可靠性评估中存在的不确定性问题。方法 对某弹用弹簧进行加速退化试验,试验过程中发现其具有多个性能退化参数,并且其退化过程具有非线性、随机性及样本差异性的特征。为了对其退化过程进行数学表征,提出一种基于多元随机效应Wiener过程的退化模型。采用基于时间尺度变换的非线性Wiener过程,描述弹簧退化过程中的非线性与随机性。基于随机效应模型,对样本的差异性进行表征,利用Copula函数描述多元性能参数之间的相互作用关系。最后推导弹簧失效寿命的概率密度函数、可靠度函数。结果 在贮存条件为25 ℃、可靠度为0.9时,基于构建的多元随机效应Wiener过程模型,当考虑性能间的相关性时,得到某弹用弹簧的贮存寿命为12 a;不考虑性能间的相关性时,得到其贮存寿命为11.5 a。结论 构建的多元随机退化模型为该弹药健康状态管理提供了相应的理论依据。     

冲击载荷作用下某型气囊缓冲性能影响研究

目的 研究冲击载荷作用下排气孔面积及初始缓冲时刻对某型气囊缓冲性能的影响.方法 采用MIMICS软件,并结合LS-Prepost软件,建立髋骨-气囊-地面有限元模型,利用LS-DYNA软件对气囊的缓冲过程进行仿真计算,得到缓冲过程中该模型的动力学响应结果.通过分析髋骨模型受力及气囊状态的变化,探讨排气孔面积及初始接触时...     

新型汽车空调制冷剂CMR-O2与R12、R134a性能比较

介绍一种新型制冷剂CMR-02。为分析其应用于汽车空调的可行性,比较了CMR-02与R134a和R12三种制冷剂在热工性能、环境性能、安全性与共沸性等方面的优劣,并比较了CMR-02和R134a的压缩机性能,发现CMR-02的单位质量制冷量增加显著(68.10%),单位容积制冷量增加14.38%,符合环保要求,且成本低廉,可以作为R12的一种较好的过渡性替代物。     

HUD状态下飞行员视觉注意资源分配机制研究

为了解决平视显示器（Head Up Display,HUD）飞行中的注意资源分配问题,基于飞行模拟器,设计双作业飞行任务开展相关研究。基于事件相关电位（Event Related Potential,ERP）技术,选取行为绩效和P300成分为评价指标,采用oddball模式,在双作业飞行任务条件下开展实验研究。结果表明:随主任务难度的增加,主、辅任务的作业绩效均显著下降,被试者对HUD上异常信息的正确操作率降低,且反应时间延长;随主任务难度的增加,由辅任务所诱发的P300的波幅显著降低。在实验结果的基础上,最终提出了HUD状态下飞行员视觉注意资源分配机制。     

On the search for mimetic patterns in environmental disclosure: an international perspective

In this paper, we assert and test the proposition that environmental disclosure (ED) is structured by institutionalised myths and that is why ED is decoupled from environmental performance and media pressures. Focusing on firms from Canada, France and Germany, findings show that ED mimetic isomorphism for different topics varies among countries and by industry sensitiveness to the environment. The results corroborate the institutional presumption that institutionalised myths vary among different contexts. Our findings also suggest that institutionalised ED structures may not reflect environmental performance, mimetic patterns being affected by environmental performance. However, the decoupling between ED mimetic isomorphism and environmental performance decrease when firms’ ED credibility is questioned by the media.     

A Study of Computer-Based Task Performance Under Thermal Stress

A visual-visual dual computer task was designed to test the effect of the thermal environment on dual task performance. The temperatures selected for testing were 20 and 35 °C Wet Bulb Globe Temperature (WBGT). 34 volunteers were randomly assigned to 1 of the 2 temperature conditions. Individual differences in single task performance were controlled by equating the baselines of single task performance. Once individual differences in single task capacity were controlled, statistically significant differences in performance were demonstrated. Mean accuracy was computed over a 1-hr testing period in each temperature condition. Participants’ mean accuracy in the 35° condition (38.18%) was substantially lower than in the 20° condition (50.88%).     

流态对生物添加强化硝化效果的影响

在15℃、相同氮负荷和添加强度条件下运行SBR和CSTR以对比分析两种典型流态(推流式和完全混合式)对硝化菌添加强化硝化效果的影响.结果表明,添加期间,SBR中氨氧化速率(AUR)和亚硝酸盐氧化速率(NUR)分别为添加前的2.34和2.39倍,停止添加后又分别降为添加前的2.01和1.78倍;添加期间CSTR中AUR和NUR分别为添加前的2.63和2.44倍,停止添加后又分别降为添加前的1.48和1.31倍.荧光原位杂交结果显示,添加期间,SBR中氨氧化菌(AOB)和亚硝酸盐氧化菌(NOB)的个数百分比分别为添加前的2.67和2.71倍,添加停止后,又分别降至原来的2.14和1.95倍;CSTR中AOB和NOB分别为添加前的2.91和1.77倍,但在添加停止后CSTR中AOB和NOB分别降至添加前的1.25和1.50倍.因此,硝化菌添加期间,两种流态的添加效果接近,但是在添加停止后,由于流态对硝化菌中K-决策者(Nitrosospira、Nitrospira)和r-决策者(Nitrosomonas europaea、Nitrobacter)的选择作用,添加的硝化菌在完全混合式条件下比推流式条件下更容易被系统淘汰.     

基于数据包络分析的水污染物排放指标初始分配方法与案例研究

基于数据包络分析(DEA)的点源水污染物排放指标初始分配方法,是将基于DEA的线性规划评价方法进行改进,从而使其适用于评价企业的水环境绩效,并依此进行排污指标初始分配。将非期望产出作为投入指标处理,构造了5输入1输出的规模可变DEA模型,并以南京市280家企业的COD排放指标初始分配为例进行了分析。结果表明,方法的模拟分配结果在公平的基础上,反映了企业的环境效率,效率越高,可得到的COD排放指标也越高,这将对企业治污起到激励作用,分配方法具有一定的可操作性;对案例企业进行分组并实行组内参评,基本可以避免部分极值原始数据对评价结果的影响,得到的COD排放指标分配结果也更为合理。     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.