污水净化装置内部流场特性分析研究

针对目前城市污水存在悬浮物和砂粒的问题,为了减少砂粒大量存在给后续单元带来的处理压力,设计了一种可实现在加药、絮凝等处理模块前,完成污水内固相悬浮物及颗粒的新型净化装置.基于计算流体动力学软件Fluent,运用混合相模型(Mixture),对新型污水净化装置内部流场特性及分离性能进行数值模拟分析.模拟结果显示新型污水净化装置内部流场分布均匀,分离性能稳定并呈现出了较好的固相去除效果,其中悬浮物的分离效率达90%以上,固相颗粒分离效率达91%.     

生物滴滤塔降解甲苯废气长期运行生物膜相特性研究

分析生物滴滤(BTF)长期运行过程生物量积累和分布规律、生物膜相特性变化,旨在探讨生物膜相特性变化与体系运行性能恶化的相关作用效应.结果表明,生物滴滤塔运行130 d后呈现出降解性能恶化的趋势,生物膜厚度和床层压降逐渐增加,且生物膜呈现出非均匀性分布,填料层上、下半段孔隙率已从启动期的85%和82%分别降低至65%和40%,表征生物膜平均代谢活性的AWCD值也明显降低,表明生物膜出现老化现象.生物膜胞外多聚物(EPS)总分泌量和蛋白质含量运行后期分别约为前期的2倍.蛋白质与多糖比值(PN/PS)逐渐从0.3增至0.95;生物膜表面疏水性与PN/PS值呈正相关,也相应从33%增为73%;EPS的平均分子量呈现减小的趋势;FTIR分析结果进一步表明,EPS的主要化学成分发生了变化.EPS分泌量和主要成分的变化可能是导致反应体系运行性能恶化的本质原因之一.上述结果可为从本质上解决生物滴滤体系长期运行面临的填料层堵塞和运行性能恶化等共性技术难题奠定基础.     

聚合氯化铁-聚(环氧氯丙烷-二甲胺)复合絮凝剂在模拟水处理中的混凝特性研究

制备出一系列具有不同聚合氯化铁(PFC)的碱化度(B)、不同聚(环氧氯丙烷-二甲胺)[P(EPI-DMA)]质量分数[ω(E)]和黏度(η)的PFC-P(EPI-DMA)复合混凝剂,并将其用于模拟染料废水和模拟天然地表水的絮凝脱色处理,对比探讨了ω(E)、η和B对PFC-P(EPI-DMA)中铁的形态分布及其混凝效果的影响,以及混凝作用机制.结果表明,复合絮凝剂中铁的有效形态含量随ω(E)的增大而不断降低;η=850 mPa.s时,复合混凝剂中铁的有效形态含量最高;随B值的增大,Feb含量先增大后减少,而Fec含量逐渐增大.一定程度上使用预水解程度较低、有机成分黏度较大的PFC-P(EPI-DMA)有利于混凝效果的提高,复合混凝剂中有机成分质量分数对混凝效果的影响则与处理对象有关.在模拟水处理中,复合混凝剂依靠电性中和及架桥吸附能力发挥混凝特性.     

氟虫双酰胺在水稻和稻田中的残留动态研究

采用超高效液相色谱法(UPLC)测定了氟虫双酰胺19.8%悬浮剂(SC)在水稻及稻田环境中的残留动态.结果表明,当氟虫双酰胺及其代谢产物NNI-des-iodo的添加量为0.05～1.0 mg·kg-1时,其在水稻田土壤、田水、稻秆、稻米和稻壳中的平均回收率为78.2%～104.8%,变异系数为1.1%～4.4%.氟虫双酰胺在2011年三地(福建福州、天津、江苏南京)的稻田水中的降解半衰期为9.8～17.3 d,土壤中10.8～22.4 d,植株中7.6～17.3 d,其在稻田水样品中检出了代谢产物NNI-des-iodo,而在土壤和植株样品中未检出.在推荐使用剂量下,于末次施药10 d后,氟虫双酰胺在水稻稻米中的残留量均低于美国规定的在稻谷上的最大残留允许量(0.5 mg·kg-1).     

有序介孔碳载金/L-赖氨酸/纳米金修饰电极的制备及其对邻苯二酚、对苯二酚的检测响应研究

通过化学还原的方法合成有序介孔碳负载纳米金粒子,并构筑有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰玻碳电极;利用扫描电镜观察介孔碳和介孔碳复合膜的微观结构,并用循环伏安法、电化学阻抗谱表征自组装电极的过程.在此基础上用差分脉冲伏安法研究对苯二酚和邻苯二酚混合物在该电极上的电催化氧化,研制了一种基于有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰电极分别检测对苯二酚和邻苯二酚的传感器.在最优的实验条件下,该传感器在对苯二酚和邻苯二酚浓度为1×10-6～8×10-4mol·L-1的范围内具有良好的线性关系,检出限分别为3×10-7mol·L-1、7×10-7mol·L-1.     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

电化学强化低能耗废水生物处理技术研究

以碳布为阴阳极材料构建一种新型的生物电化学系统（BES）,研究该系统在不曝气条件下对城市污水的处理效果,并与传统的厌氧和好氧处理方法进行比较。结果表明,该BES处理城市污水是可行的,与传统曝气法相比能够显著降低能耗。在进水CODcr,为350mg／L、NH3-N为15mg／L、水力停留时间（HRT）为24h时,电化学强化生物处理系统对CODcr和NH3-N的去除率达84％和80％,优于同等条件下的厌氧、好氧生物处理方法。BES的输出电压最高为211mV。     

基于层次分析法（AHP）的环境绩效审计评价体系构建研究——以丽水市为例

文章构建了环境绩效审计综合评价指标体系,运用层次分析法确定指标体系的权重,对于提高环境绩效审计工作质量和效率具有重要意义。丽水市生态资金绩效审计的实证研究结果表明,指标体系评价结果能客观反映市县行政区实际,指明影响环境管理绩效的消极因素,能有效提高财政经费使用效益,充分发挥审计服务科学发展的作用。     

氧气热处理的TiO2纳米管阵列光电催化降解亚甲基蓝的研究

采用原位阳极氧化法在Ti基底上制备了高度有序的TiO2纳米管阵列薄膜,SEM图像表明TiO2纳米管定向排列整齐,分布均匀,其管径范围在70～100 nm.XRD结果证明,阳极氧化法制备的TiO2纳米管为无定型晶型,经退火后为具有良好光催化活性的锐钛矿型.以亚甲基蓝（methylene blue）为目标物研究了TiO2纳米管光电催化性能及影响因素,结果表明,以0.1 mol/L NaCl为电解质,在氧气热处理气氛下,外加偏压为0.5 V、pH=3.25、光照强度为1 000μW/cm2、纳米管薄膜表面积为2 cm×2 cm且MB初始浓度为10 mg/L的条件下,TiO2纳米管阵列薄膜光电催化降解MB的降解效率可达99.56%.电化学阻抗谱分析显示,光电催化降解过程的速控步骤均为表面反应步骤,外加偏压减小了界面电荷转移阻抗,提高了光生载流子的分离效率.