钛合金海水管路系统材料腐蚀特性研究

目的为钛合金海水管路材料体系提供可靠的基础腐蚀性能数据,开展了一系列对比研究试验。方法筛选铜镍合金与钛合金海水管路体系主体材料各两种,开展海水腐蚀浸泡试验与海水腐蚀电化学试验,来获取两类海水管路体系本征腐蚀性能。结果钛合金在静态海水浸泡30天没有腐蚀质量损失,自腐蚀电位及稳定电位较正,自腐蚀电流较小,耐腐蚀性较好;铜镍合金在静态海水中浸泡有腐蚀产物及腐蚀质量损失,自腐蚀电位较钛合金负,且自腐蚀电流较大,耐蚀性能较钛合金差。结论钛合金在海水中有良好的耐蚀性,适合有长寿命要求的大型舰船使用。     

Dynamic membrane bioreactor performance enhancement by powdered activated carbon addition: Evaluation of sludge morphological, aggregative and microbial properties

The effects of powdered activated carbon(PAC) addition on sludge morphological, aggregative and microbial properties in a dynamic membrane bioreactor(DMBR) were investigated to explore the enhancement mechanism of pollutants removal and filtration performance. Sludge properties were analyzed through various analytical measurements. The results showed that the improved sludge aggregation ability and the evolution of microbial communities affected sludge morphology in PAC-DMBR, as evidenced by the formation of large, regularly shaped and strengthened sludge flocs. The modifications of sludge characteristics promoted the formation process and filtration flux of the dynamic membrane(DM) layer. Additionally, PAC addition did not exert very significant influence on the propagation of eukaryotes(protists and metazoans)and microbial metabolic activity. High-throughput pyrosequencing results indicated that adding PAC improved the bacterial diversity in activated sludge, as PAC addition brought about additional microenvironment in the form of biological PAC(BPAC), which promoted the enrichment of Acinetobacter(13.9%), Comamonas(2.9%), Flavobacterium(0.31%) and Pseudomonas(0.62%), all contributing to sludge flocs formation and several(such as Acinetobacter) capable of biodegrading relatively complex organics. Therefore, PAC addition could favorably modify sludge properties from various aspects and thus enhance the DMBR performance.     

“真菌-细菌”复合菌剂的构建及其降解α-蒎烯、乙酸丁酯和邻二甲苯混合废气的性能研究

以α-蒎烯、乙酸丁酯和邻二甲苯3株高效降解菌为菌源(2株真菌和1株细菌),通过对比单菌单底物和多菌多底物降解效果,确定这3株菌之间不存在抑制效应,可用于构建"真菌-细菌"复合菌剂.考察了复合菌剂与活菌液的降解性能及对饥饿期的响应,结果表明复合菌剂和活菌液均能较完全地降解底物,但经历饥饿期后,复合菌剂对底物仍保持100%的降解率,而活菌液对α-蒎烯和邻二甲苯的去除率只有94.6%和62%.该菌剂具有较好的稳定性,常温保存180 d后对各初始浓度为120 mg·L-1的α-蒎烯、乙酸丁酯和邻二甲苯24 h内去除率为48.2%、95.1%和57.3%.将复合菌剂与活性污泥分别接种于生物过滤塔,复合菌剂能明显缩短生物膜形成时间,接种的反应器对底物总去除率维持在90%左右,而活性污泥只有60%.     

基于民生满意度的资源型城市转型绩效测度及群体差异研究——以湖北省黄石市为例

民生满意度评价是资源型城市转型绩效测度的终端体现,对于改善转型绩效、促进资源型城市可持续发展具有重要的现实意义。论文以民生满意度为视角,从居民生计、公共服务、民生环境、文化消费4个方面构建资源型城市转型绩效测度指标体系,采用专家群决策及AHP方法确定指标权重,运用顾客满意度评价法对黄石这一典型资源型城市转型绩效进行测度并进一步揭示被调查群体的差异特征。研究结果表明:1)基于民生满意度的黄石市转型绩效测度值为4.17,总体上处于"优秀"等级水平,但在某些局部指标上仍略显不足;2)黄石市转型绩效存在由被调查者特征而引起的群体和区域差异:不同性别、年龄、文化程度、职业类别、家庭年经济收入群体对转型民生满意度评价不同,并呈现一定规律;从区域差异来看,铁山区、大冶市等传统老矿区依托国家资源型城市转型政策支持,转型民生满意度绩效值相对较高,西塞山区、下陆区、黄石港区等中心城区历史包袱沉重、转型升级民生满意度暂时落后,以阳新为代表的农业县市,民众对于转型的认知和感受相对滞后,转型升级民生满意度居末;3)黄石市转型的民生满意度赋值与其物质产出绩效具有一致性。     

污染场地固化/稳定化修复的评价方法与标准

固化/稳定化技术是一项在欧美等国家的污染场地修复中广泛应用的技术.在分析固化/稳定化修复效果常用的浸出试验方法和物理评价方法以及相对应的评价标准的基础上,发现我国固化/稳定化修复效果的评价方法仅有少量振荡浸出试验的方法,还缺少动态浸出试验的评价方法;浸出毒性测试普遍采用硫酸硝酸法浸出评估,忽略了As、Cr(Ⅵ)等含氧阴离子在中性至弱碱性pH下溶解度达到最大的情况;固化/稳定化修复效果的评价标准则主要借鉴固废毒性鉴别与管理方法,但该方法未规定污染土壤资源化再利用时的评价依据;另外,污染土壤和固体废物的自身特性也有一定的差异.提出了基于我国国情的污染土壤固化/稳定化浸出测试和评价标准体系:当污染土壤固化/稳定化后采用卫生填埋或一般工业固体废物贮存、处置场处置时,可参考固体废物填埋处置时的评价方法与标准;当污染土壤固化/稳定化后原址填埋时,则应增加绕流浸出方法或穿透浸出试验方法,其评价标准可参考GB/T 14848—1993《地下水质量标准》或根据关注点浓度的要求进行风险评估推算确定;当污染土壤固化/稳定化后再利用时,需根据再利用的具体情景选择相应的评价方法与标准.      

高效液相色谱法检测临沂化工厂四周土壤中的多环芳烃研究

利用快速溶剂提取-高效液相色谱-紫外/荧光检测器串联的方式检测土壤中16种多环芳烃,重点优化了梯度洗脱程序和紫外荧光检测波长程序,优化后的方法检出限在0.2~7.8μg/kg,回收率在88%~113%之间.对临沂某化工企业四周1000米以内的20个土壤样品进行了检测,结果发现,多环芳烃总量范围为27.4~553μg/kg,平均值为120μg/kg,参照Maliszewska-Kordybach建议的欧洲土壤中多环芳烃污染程度分级方法,在检测的20个土壤样品中有3个样品属于轻度污染,其他属于无污染.     

过载状态下橡胶减振器动态性能分析

目的研究飞行过载状态下的橡胶减振器动态性能。方法通过对试验件施加不同大小力来模拟过载情况,测量试验件减振前后的加速度响应。结果对加速度响应进行分析,发现橡胶减振器主减振方向上的减振效率随飞行过载增大而减小,减振器的刚度反而增大。在正交于主减振方向上,其减振器减振效率和刚度,基本不随飞行过载环境而变化。结论飞行过载影响橡胶减振器在过载方向上的动态性能,因此在橡胶减振器选型时,应考虑到飞行过载环境的影响。     

基于电化学阻抗的航空有机涂层加速老化动力学规律研究

目的研究有机涂层的加速老化动力学规律。方法针对某飞机实际服役环境条件特点,编制有机涂层加速老化试验谱,开展0~9 a的当量加速老化试验。借助PARSTAT 4000电化学工作站,测试老化试验后涂层试件的电化学阻抗值。结果得到了不同老化周期有机涂层的Bode图、等效电路、孔隙率、吸水率和电化学阻抗,表征了加速试验条件下的老化动力学规律。结论低频阻抗|Z|0.01可以作涂层防腐蚀性能的评价指标,涂层老化过程大致可分为初期、中期和后期三个阶段,分别对应三个不同等效电路。     

Task type as a moderator of positive/negative feedback effects on motivation and performance: A regulatory focus perspective

Applying Higgins' regulatory focus theory, we hypothesized that the effect of positive/negative feedback on motivation and performance is moderated by task type, which is argued to be an antecedent to situational regulatory focus (promotion or prevention). Thus, first we demonstrated that some tasks (e.g., tasks requiring creativity) are perceived as promotion tasks, whereas others (e.g., those requiring vigilance and attention to detail) are perceived as prevention tasks. Second, as expected, our tests in two studies of the moderation hypothesis showed that positive feedback increased self‐reported motivation (meta‐analysis across samples: N = 315, d = 0.43) and actual performance (N = 55, d = 0.67) among people working on promotion tasks, relative to negative feedback. Positive feedback, however, decreased motivation (N = 318, d = ?0.33) and performance (N = 55, d = ?0.37) among individuals working on prevention tasks, relative to negative feedback. These findings suggest that (a) performance of different tasks can affect regulatory focus and (b) variability in positive/negative feedback effects can be partially explained by regulatory focus and task type. Copyright © 2010 John Wiley & Sons, Ltd.     

The effects of chemical protective suits on human performance

Workers in the chemical industry are often required to wear protective suits while performing tasks. While these suits can be life saving, they increase the difficulty and discomfort faced by the wearer. This research explores the performance of individuals wearing the highly cumbersome Level A suit. The suits are heat-retentive and can cause fatigue that affects performance by increasing response time and decreasing accuracy. Members of Missouri’s Civil Support Team (CST) served as subjects for this research. They conducted fine and gross motor tests. Their completion time and accuracy were evaluated both out-of-suit and in-suit for the Level A chemical protective suits.A t-test was conducted to evaluate the effect of the Level A suits on performance. Results showed a significant increase in completion time and errors for gross motor tasks. This type of task had up to a 103% increase in time required and up to a 34% decrease in accuracy. The suit’s impact on fine motor skill was also significant, but to a lesser extent. Repeated measures test was performed to evaluate any potential time-in-suit effect. A decrease in mean task completion time was observed for some of the tasks. There was a corresponding decrease in accuracy but no consistent time-in-suit effect was identified.The results indicate the need for care when designing procedures and equipement to be used by humans wearing restrictive PPE. It is important to take human limitations into consideration in the design phase in order to decrease the need for human adaptation and increase system safety. To achieve this, understanding human factors is imperative when designing equipment, tasks, or procedures for workers wearing PPE.