Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

电化学反应器吸附去除氟离子的研究

采用改性活性炭粉末对用纯净水加氟化钠配制而成的含氟水溶液进行动态电吸附去除实验.研究不同电压、电吸附时间,以及Cl-和SO2-4对氟离子去除的影响,并探讨吸附动力学和吸附方程.实验结果表明:活性炭对氟离子的吸附等温方程符合Freundlich方程,吸附动力学符合一级动力学方程;活性炭对氟离子去除与所施加的电位、吸附时间等因素有关,施加的电位越大,去除效果越好;随着吸附去除时间的延长,氟离子浓度下降趋缓;Cl-对氟离子去除影响很小,而SO2-4对氟离子去除有显著的不利影响.     

Assessment of Soil Erodibility Indices for Conservation Reserve Program Lands in Southwestern Kansas Using Satellite Imagery and GIS Techniques

The soil erodibility index (EI) of Conservation Reserve Program (CRP) lands, which was the major criterion for CRP enrollment, was assessed for six counties in southwestern Kansas using USGS seamless digital elevation model data and Geographical Informational System techniques. The proportion of land areas with EI values of 8 or lower was less than 1% of the entire study area and most of the land areas (72.5%) were concentrated on EI values between 8 and 24. Although land acreage with EI values of 24 or higher decreased dramatically, the proportion of CRP lands to the other land-use types did not change much from low to high EI levels. The soil EI and physical soil characteristics of the CRP lands were compared to those of other land-use types. In general, the mean EI values of the land-use types were strongly correlated with physical soil properties, including organic matter content, clay content, available water capacity, permeability, and texture. CRP lands were compared in detail with cropland in terms of their soil characteristics to infer the pivotal cause of the land transformation. Although there was no significant statistical difference in EI between cropland and CRP soils, soil texture, soil family, and permeability were statistically different between the two. Statistical analyses of these three variables showed that CRP soils had coarser texture and higher permeability on average than cropland soils, indicating that CRP lands in the study area are drier than cropland soils. Therefore, soil moisture characteristics, not necessarily soil erosion potential, might have been the key factor for CRP enrollment in the study area.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

石墨烯凝胶电极的制备及电吸附Pb2+的性能

电吸附去除水中重金属离子具有吸附容量高和电极可再生的优点.本文采用高温水热法还原氧化石墨烯(GO)得到石墨烯水凝胶(GS)并经压片制得GS电极.本文对GS电极的电化学性能进行了测试,考察了GS电极电吸附Pb~(2+)的动力学和热力学特性,以及电极的脱附和循环使用情况.结果表明,GS电极的电化学性能优异,其单位质量比电容高达200.4 F·g~(-1)(1 A·g~(-1));提高电压有利于GS电极电吸附Pb~(2+),电压为-1.2 V时,GS电极对Pb~(2+)的去除率达96.4%;GS电极电吸附Pb~(2+)的饱和吸附量达461.20 mg·g~(-1),是不加电时饱和吸附量的2倍;施加反向电压可以实现Pb~(2+)的脱附和电极再生,电吸附-脱附15次后,电极对Pb~(2+)的去除率保持在95%以上.     

Chemical composition and properties of ashes from combustion plants using Miscanthus as fuel

Miscanthus giganteus is one of the energy crops considered to show potential for a substantial contribution to sustainable energy production. In the literature there is little data available about the chemical composition of ashes from the combustion of Miscanthus and practically no data about their physical properties. However, for handling, treatment and utilization of the ashes this information is important. In this study ashes from two biomass combustion plants using Miscanthus as fuel were investigated. The density of the ashes was 2230 ± 35 kg/m~3, which was similar to the density of ashes from straw combustion. Also the bulk densities were close to those reported for straw ashes. The flowability of the ashes was a little worse than the flowability of ashes from wood combustion. The measured heavy metal concentrations were below the usual limits for utilization of the ashes as soil conditioner. The concentrations in the bottom ash were similar to those reported for ash from forest residue combustion plants. In comparison with cyclone fly ashes from forest residue combustion the measured heavy metal concentrations in the cyclone fly ash were considerably lower. Cl-, S and Zn were enriched in the cyclone fly ash which is also known for ashes from wood combustion. In comparison with literature data obtained from Miscanthus plant material the concentrations of K, Cl-and S were lower.This can be attributed to the fact that the finest fly ash is not collected by the cyclone de-dusting system of the Miscanthus combustion plants.     

基于环境因子和邻近信息的土壤属性空间分布预测

为探索乡镇尺度上土壤属性空间分布预测的最佳方法,以江西省万年县齐埠镇为例,借助四方位搜索法、地统计学和遥感影像分析技术提取环境因子（地形因子和植被覆盖指数）和邻近信息[w（有机质）与w（速效钾）],构建OK法（普通克里金法）、RK1法（仅基于环境因子的回归克里金法）以及RK2法（基于环境因子和邻近信息的回归克里金法）对齐埠镇耕地表层（0~20 cm）土壤w（有机质）、w（速效钾）空间分布进行预测.结果表明:齐埠镇土壤w（有机质）平均值为35.03 g/kg,w（速效钾）平均值为96.73 mg/kg,均为中等空间变异性.对62个样点进行建模,16个测试样点进行独立验证的误差分析表明,RK2法对土壤w（有机质）、w（速效钾）预测结果的均方根误差、平均绝对误差和平均相对误差较OK法分别降低了18.05%、18.01%、21.77%和7.25%、9.49%、9.84%;较RK1法分别降低了22.48%、20.91%、22.02%和9.27%、12.61%、13.52%.研究显示,RK2法明显提高了土壤w（有机质）、w（速效钾）空间分布模拟精度,并且存在改进和提高的空间.      

外源Ca2+对SBR启动期活性污泥胞外多聚物的动态影响

利用无机物如Ca~(2+),加快活性污泥反应器启动,强化活性污泥絮体性能和结构稳定性,受到越来越多的重视.采用序批式反应器,研究进水中添加Ca~(2+)对反应器启动期活性污泥沉降性能和胞外多聚物的影响.结果表明运行至28 d,与进水中不添加Ca~(2+)的反应器(对照反应器)相比,进水中添加150 mg·L~(-1)外源Ca~(2+)的反应器中活性污泥MLSS和MLVSS值分别高出了89.6%和75.6%,SVI值则降低了47.9%;活性污泥胞外多聚物总量增加了76.4%,多糖增加了28.8%,蛋白质减少了31.6%,添加150 mg·L~(-1)外源Ca~(2+)的反应器中污泥胞外多聚物中多糖/蛋白质值为68.8,对照反应器的活性污泥胞外多聚物多糖/蛋白质值仅为36.6.三维荧光光谱和红外光谱分析表明外源Ca~(2+)导致活性污泥胞外多聚物组分发生了变化.实验结果为进水中添加外源Ca~(2+)改善活性污泥沉降性能提供了基础数据.     

模型模拟土壤性质和植被种类对再生水灌溉水盐运移的影响

为推动再生水安全灌溉,本研究运用ENVIRO-GRO模型模拟了不同土壤性质、植被条件下土壤盐分的分布规律及累积趋势,探讨了土壤性质和植被种类对再生水灌溉水盐运移的影响.研究发现,不同土壤初始含盐量下,经多年重复模拟后最终达到统一的平衡状态;而不同土壤质地下,随着灌溉年份的增加,壤土、黏壤土中的土壤ECe年均值逐渐增加直到平衡,砂壤土中的土壤ECe年均值逐渐减少直到平衡,平衡时土层中的ECe值砂壤土〈壤土〈黏壤土.3种植被下,大叶黄杨、油松的土壤ECe值增加量小于早熟禾;土壤盐分在土层中的空间、时间分布也均有所不同.此外,不同模拟情景下,土壤盐分累积都不会影响植被的生长（黏壤土除外）,但均出现轻度盐渍化（砂壤土除外）.