干湿球湿度仪在电子束辐照烟气脱硫脱硝工业试验中的应用研究

介绍了自制湿度仪的设计思想、测湿原理、系统构成和在电子束辐照烟气脱硫脱硝工业试验装置中的应用情况。试验表明,该仪器能够准确地连续检测烟气湿度,并具有较强的耐腐蚀、耐污染性能,较好地适应了工业试验装置这种湿度大、腐蚀性强、烟尘浓度高的复杂烟气条件。     

冷冲击条件下饱水煤样结构损伤规律研究*

为探究煤体在冷冲击影响下强度损伤特征及细观结构演化规律,通过自制低温冲击系统,利用声发射、金相显微镜宏观与细观手段结合的方法,基于ImageJ图像分析软件分别对干燥煤样、饱水煤样冷冲击前后细观结构演化进行量化表征,并通过测试渗透率验证煤体结构变化带来的增透效果,研究结果表明:在煤体中超声波波速随冷冲击温度降低而下降;相同时间内,冷冲击温度越低,声发射振铃计数表现越活跃,煤体释放能量愈大,致裂效果越显著;经冷冲击后的饱水煤样相对于干燥煤样会产生更多的斜向新生裂隙,新萌生裂隙与原生裂隙交汇贯通形成絮状网格,其渗透效果显著提升;随冲击温度的降低,抗压强度、弹性模量均增大。研究结果可为低温改善煤层透气性,增产煤层气及矿井瓦斯灾害防治技术提供理论依据。     

原子力显微镜分析聚二甲基二烯丙基铵盐的吸附和絮凝行为:反离子的影响

通过对聚二甲基二烯丙基氯化铵(PDADMAC)改性得到了高分子量的聚二甲基二烯丙基硝酸铵(PDADMANO₃)和聚二甲基二烯丙基硫酸铵(PDADMASO₄).通过电导率,比浓粘度,原子力显微镜,以及高岭土悬浊液絮凝试验的残余浊度,Zeta电位和絮凝指数,研究了一价阴离子(Cl^-,ON₃^-)和二价阴离子(SO₄^2-)对聚二甲基二烯丙基铵盐(PDADMAX)的溶液性质、吸附的结构与形貌和絮凝性能的影响.结果表明:不同的反离子对PDADMAX的溶液性质、吸附的结构与形貌和絮凝性能有显著影响.PDADMANO₃具有更高的絮凝效率和“电中和作用”,而PDADMASO₄具有更宽的最佳絮凝范围和更大的絮体粒径,及更强的“吸附架桥作用”.特别对于聚电解质的吸附和絮凝机理的研究,单个高分子的原子力显微镜图象是一种非常有效地分析方法.     

某造纸厂废水中二（口恶）英含量及其电子束辐照降解

通过对造纸厂废水中2,3,7,8-PCDD/Fs的检测,分析了其在造纸厂废水中的浓度水平与特征,并将不同剂量电子束辐照前后废水中2,3,7,8-PCDD/Fs浓度水平进行对比,初步探讨了电子束辐照造纸废水中2,3,7,8-PCDD/Fs的可行性,降解机制以及降解率.结果表明,该造纸厂未经处理过的原水中2,3,7,8-PCDD/Fs浓度为239 pg·L-1,毒性当量浓度为41.0pg·L-1.通过用30 kGy和60 kGy剂量的电子束辐照处理后,废水中2,3,7,8-PCDD/Fs的浓度均有不同程度地降低,其降解率分别为5.27%和23.6%.     

原子力显微镜液池成像技术应用于微絮凝过滤工艺过程中的实验条件优化

采用原子力显微镜液池成像技术对微絮凝过滤工艺过程中的微絮凝时间和搅拌强度进行优化.结果表明,原子力显微镜液池成像技术可以对混凝过程中的微絮体进行形貌表征和数字描述,并证实微絮凝过滤工艺在处理实际印染工业尾水过程中,微絮凝时间为2 min,搅拌强度为100 s-1时可以达到优化的处理效果.     

Enhanced debromination of 4-bromophenol by the UV/sulfite process: Efficiency and mechanism

Halogenated aromatic compounds have attracted increasing concerns due to their toxicity and persistency in the environment, and dehalogenation is one of the promising treatment and detoxification methods. Herein, we systematically studied the debromination efficiency and mechanism of para-bromophenol(4-BP) by a recently developed UV/sulfite process. 4-BP underwent rapid degradation with the kinetics accelerated with the increasing sulfite concentration, pH(6.1–10) and temperature, whereas inhibited by dissolved oxygen and organic solvents. The apparent activation energy was estimated to be 27.8 kJ/mol. The degradation mechanism and pathways of 4-BP were explored by employing N_2O and nitrate as the electron scavengers and liquid chromatography/mass spectrometry to identify the intermediates. 4-BP degradation proceeded via at least two pathways including direct photolysis and hydrated electron-induced debromination. The contributions of both pathways were distinguished by quantifying the quantum yields of 4-BP via direct photolysis and hydrated electron production in the system. 4-BP could be readily completely debrominated with all the substituted Br released as Br-, and the degradation pathways were also proposed. This study would shed new light on the efficient dehalogenation of brominated aromatics by using the UV/sulfite process.     

电离层环境对地空信息系统的影响效应

目的为了减缓电离层对卫星通信、全球卫星导航系统、星载合成孔径雷达等系统的影响,提高系统的环境适应性。方法由穿越电离层的无线电信号传播原理出发,结合各种系统的工作原理,给出电离层影响的分析方法。结果针对电离层闪烁、极化旋转、时延和色散等传播效应造成卫星通信误码率上升、卫星导航定位误差增大、SAR图像偏移和分辨率下降等影响,分析给出了效应补偿和减缓应对方法。结论电离层延迟效应可以由电离层实测值或者模型来进行校正,而闪烁效应大多需采用规避的措施来减缓其影响。     

真空紫外-亚硫酸盐法降解PFOS影响因素

通过试验,考察了亚硫酸盐浓度、pH值、全氟辛烷磺酸(perfluorooctane sulfonate,PFOS)初始质量浓度及共存物质对真空紫外-亚硫酸盐法降解PFOS的影响.结果表明,亚硫酸盐浓度的增加有利于提高活性物种水合电子的量,PFOS降解率及脱氟率均随之提高,亚硫酸盐浓度从1 mmol·L~(-1)增加至20 mmol·L~(-1)时,PFOS降解率及脱氟率分别从45%及40%提高至97%及63%;随着原水pH值的升高,水合电子的生成量也随之增加,PFOS的降解率及脱氟率均提高,且脱氟率对pH值的变化更敏感;PFOS初始质量浓度的提高降低了PFOS的降解率及脱氟率,但PFOS的绝对降解量却大幅提高,当PFOS初始质量浓度从1 mg·L~(-1)提高至50 mg·L~(-1)时,PFOS在4 h内的降解量提高了约50倍,这主要是由于高污染物浓度条件下水合电子的利用率较高;Cl~-或HCO_3~-的存在对PFOS降解率影响较小,但对脱氟的影响较为明显,在试验研究的浓度范围内,PFOS脱氟率随Cl~-浓度的增加而提高,随HCO_3~-浓度的增加呈现先升高后降低的规律;腐殖酸的存在屏蔽了部分用于光化学反应的光,而且可以捕获体系的活性物种,从而降低了降解率及脱氟率.     

电子束辐照降解浸金废水中锌氰络合物溶液研究

研究了电子束辐照降解锌氰络合物溶液,考察了总氰初始浓度、pH值、锌氰摩尔比对总氰的 降解效率的影响.实验结果表明,在相同的辐照剂量下,初始浓度越低越有利于锌氰络合物溶液总氰的彻底降解,锌氰络合物总氰浓度高其降解效率更高;电子束辐照降解锌氰络 合物溶液符合一级动力学方程;在相同的辐照剂量下,随着pH值和锌氰摩尔比降低,锌...     

Quantification, morphology and source of humic acid, kerogen and black carbon in offshore marine sediments from Xiamen Gulf, China

Three types of macromolecular organic matters (MOMs), i.e. humic acid (HA), kerogen+black carbon (KB), and black carbon (BC) were extracted from marine sediments of Xiamen Gulf, southeast of China. The chemical composition, morphological property and source of the three extractions were characterized by elemental analyzer/isotope ratio mass spectrometry (EA/IRMS) and scanning electron microscope (SEM). The results showed that KB was the predominant fraction in MOMs, which accounted for 61.79%-89.15% of the total organic content (TOC), while HA consisted less than 5%. The relative high contents of kerogen and BC, and low contents of HA in the samples indicated that anthropogenic input might be the major source of organic matter in marine sediments near the industrial regions. The characterization of SEM, not only revealed morphological properties of the three fractions, but also allowed a better understanding of the source of MOMs. The δ 13 C values of the three fractions suggested that materials from terrestrial C 3 plants were predominant. Furthermore, the anthropogenic activities, such as the discharge of sewage, coal and biomass combustion from industry nearby and agricultural practices within drainage basin of the Jiulong River, were remarkably contributed to the variations in δ 13 C values of MOMs in the offshore marine sediments.