City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

COD仪替代试剂的开发及其在普通分光光度计上的应用研究

对进口的COD测定试剂进行了替代品开发,研制出适用于该仪器的替代试剂。通过实验找到了替代试剂最佳配比。实验证实,自制试剂可完全替代HACH公司的消解试剂用于各种工业和生活废水的消解测定,而且该自制试剂可用于普通分光光度计测定。     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.     

北京市黑臭水体治理的动态遥感监测及影响因素分析

为及时、准确掌握黑臭水体治理进展,基于“北京二号”影像数据和同期的野外综合水体实测数据,采用深度学习算法对黑臭水体进行识别,并引入地理探测器对黑臭水体影响因素进行定量分析。结果表明：基于Faster R-CNN算法的黑臭水体遥感识别,总准确率达到90%左右,短时间内(5~33 h)即可完成北京市建成区黑臭水体的筛查工作;在空间维度上,黑臭水体主要分布在中心城区以外,并在通州区、朝阳区和大兴区较为集中;在时间维度上,专项治理期间(2015—2018年)内,黑臭水体的数量和长度总体趋势都是递减的,但偶尔也有反黑现象;2018年底,在全市建成区范围内,已全面消除黑臭现象;在一年内,第1季度水体环境最好,第2季度次之,第3季度最差,从第4季度开始好转;在北京市大兴区,土壤全氮量(贡献率为32.07%)和周边养殖场排污(贡献率为27.04%)是黑臭水体形成的主要影响因素,高程(贡献率为8%)、土壤类型(贡献率为7.6%)和土地利用类型(贡献率为6.1%)的贡献率较弱。由此可以看出,基于Faster R-CNN算法识别影像中的黑臭水体识别准确率高,可及时、准确地监测城市黑臭水体治理情况,使用地理探测器可定量分析并确定各影响因素的贡献率。本研究成果可为城市黑臭水体的动态监测和治理提供有力的技术支撑。     

地理探测器方法下北京市人口空间格局变化与自然因素的关系研究

人口空间分布具有尺度特征,从乡镇街道尺度研究自然因素对城市人口空间格局的影响有利于得出更精细的结果,并为城市人口合理布局和规划提供科学依据。论文利用第五、六次人口普查乡镇街道数据,分析北京市人口空间格局特征,利用地理探测器研究自然因素对人口分布的影响。研究表明：1）自然因素对不同类型人口空间格局影响具有差异性。对常住人口作用强度由大到小的自然因素分别是适宜建设用地面积、地形起伏度、坡度、海拔高程和河网密度,对外来人口作用力由大到小的自然因素分别是地形起伏度、适宜建设用地面积、坡度、海拔高程和河网密度;2）自然因素对不同地区人口空间格局影响具有差异性。除适宜建设用地面积外,坡度和河网密度分别对六环内、外区域人口密度影响较大。高程和地形起伏度对六环外人口格局作用力高于六环内地区;3）两类自然因素叠加对人口密度作用的强化方式体现为因素相互协同或因素作用力非线性增加。5类自然因素对人口密度的影响力交互作用探测值为1,各类自然因素对城市人口空间格局的影响力协同增强。     

石油化工企业有限空间中的气体检测

介绍了便携式气体检测报警仪用于石油化工企业中有限空间的气体检测时的采样方法、检测点选择、检测工作程序以及检测结果的处理.     

固定式可燃气体检测报警器运行管理中存在的问题及对策

针对固定式可燃气体检测报警器运行管理中存在的问题进行了分析,并提出整治措施.     

Neutron activation analysis of ceramic tiles and its component and radon exhalation rate

IntroductionCeramic,consistofearthymaterialslikeclaykaolin ,limestoneandsandglass .Ceramicmaterialsarenonmetalic ,inorganiccompoundsprimaryoxides ,alsocarbides ,nitridesandsilicides .Twotypesofbondingmechanismsoccurinceramicmaterial ,ionicandcovalent.Theo…     

光离子化检测器便携式气相色谱仪快速测定空气中苯系物

本文研究了使用光离子化检测器便携式气相色谱仪,直接测定空气中ｍｇ／ｍ３级苯系物（苯、甲苯、乙苯、邻、间、对位的二甲苯及异丙苯）的快速分析方法。方法的线性范围为０～１００ｍｇ／ｍ３,相关系数均在０．９９９以上,方法的变异系数分别为２．９～１２．５％（５ｍｇ／ｍ３）,３．４～７．９％（３０ｍｇ／ｍ３）,方法最低检测限达０．２～１．０ｍｇ／ｍ３。     

西南高山峡谷区植被变化及影响因素分析

西南高山峡谷区是我国典型生态脆弱区,认识其植被变化特征及影响因素可以为西南高山峡谷区生态环境建设对策的制定提供理论依据,对实现区域经济、环境以及生态和谐统一发展,具有一定的现实意义.基于2000~2019年NDVI、社会经济因子和自然因子数据集,采用一元线性回归法、Hurst指数、地理探测器模型和变异系数等方法分析了西南高山峡谷区NDVI时空变化及稳定性特征,并探讨了NDVI空间分异影响因素.结果表明：①空间上看,植被呈现东南高,西北低的分布格局,中高和高植被覆盖的区域面积占比71.71%,植被覆盖总体处于较高水平.时间上看,植被呈现改善趋势的区域面积占比85.90%,恢复效果明显,且未来植被变化趋势还将以改善为主.②高程、植被类型和土壤类型是影响NDVI空间分异的主导因子,q值均不低于0.40;气温和降雨量为次要因子,q值分别为0.274和0.225.双因子交互作用增强了单因子的影响力,表现为双因子增强和非线性增强两种关系,其中高程∩植被类型组合q值最高为0.714,其次是高程∩土壤类型组合q值为0.688.③研究时段内NDVI整体稳定性较好,低波动变化和较低波动变化的区域面积占比为89.95%;而中等以上波动的区域面积占比为10.05%,集中在海拔高、气温低、降雨少、土壤贫瘠和植被较差等生态环境相对脆弱的区域.植被变化是多因素综合作用的结果,需因地制宜,有针对性地采取不同策略修复西南高山峡谷区生态环境.