Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

Household organic waste composting using bins with different types of passive aeration

The objective of this study was to study the performances of six 200-L polyethylene bins, each with different design for passive aeration to organic wastes composting. Food scraps and dry leaves (1.6 kg) were added to each bin once a day until the bin was full. Temperatures at the middle portion were measured daily. The compost from each bin was taken once a week for 120 days for analysis of C, N, volatile solids, and a germination index once a week for 120 days. After 120 days, the compost sample from each bin was taken to determine the mass reduction, size distribution, CEC, N, P and K values. The results showed that the temperatures inside the bins were in the ranges of 24 °C-57 °C. The composts in all bins were found to be stable at around 56-91 days. The wastes decayed fastest in bins with lateral and vertical systems of natural ventilation. It took about two months to stabilize the organic wastes, with a 59-62% decrease of mass. The C/N ratio, CEC, N, P, and K values of the final composts were 14.8-16.0, 66-68 cmol/kg, and 1.26-1.50% N, 0.52-0.56% P₂O₅ and 1.66-1.92% K₂O, respectively.     

我国电子废弃物处理产业现状与前景探讨

电子废弃物处理产业是伴随我国近年来社会经济快速发展而产生的一个新兴产业。本文分析了电子废弃物的经济价值、处理技术和产业政策,并对我国电子废弃物处理产业的现状与前景进行了探讨。     

电子垃圾拆解废渣-土壤-蔬菜中多氯联苯污染特征与健康风险评估

为研究某电子垃圾拆解区废渣-土壤-蔬菜中多氯联苯(PCBs)污染特征及对人体的潜在健康风险.对电子垃圾废渣样品采样3个、废渣旁的农田土壤和蔬菜分别采样10个和18个(油麦菜6个、四季豆6个和圆白菜6个).废渣、土壤和蔬菜中PCBs含量测定采用高分辨气相色谱-质谱法.结果表明,总PCBs水平:废渣(11 938ng·g-...     

弹上电子部件加速因子估计方法研究

目的 针对高可靠长寿命的弹上电子部件在实际贮存环境温度起伏变化的情况,研究基于等效温度的加速因子估计方法。方法 首先剖析弹上电子部件失效机理,然后基于阿伦尼斯模型,分析加速应力与实际环境温度的对应关系,求解实际环境等效温度,进而估计加速因子,最后通过某型导弹综合控制器中的时序控制电路板,验证该方法的工程适用性。结果 该方法能够真实反映环境温度情况,且与传统加权平均温度计算方法相比,加速因子估计和加速试验时间预测更准确,且随着实际环境温度起伏的增大,优势更加明显。结论 该方法在实际贮存环境温度起伏变化的情况下,能够有效提高加速因子估计和加速寿命试验时间预测的准确性,为弹上电子部件加速寿命试验方案设计提供可靠依据,对其他高可靠长寿命产品的加速因子估计也具有一定的参考价值。     

基于WebGIS的浙江近海水环境质量评价系统的研制

以浙江近海为例,采用ArcIMS作为电子地图网络发布平台,集成ASP和Report Service技术,同时采用遥感水质反演的方法获取水环境信息,建立了基于WebGIS的近海水环境质量评价系统.本文讨论了系统的设计思路、数据组织和开发流程,初步实现了水质和水产品质量信息的统计分析、评价咨询、网络发布等功能.     

物理场水处理器的应用与分类研究

笔者在物理场水处理器的组成结均和作用原理的基础上,依据相关国家行业标准,将其分成了三大类,并对各类物理场水处理器作了简要的说明。其中,重点阐述了电子式水处理器的分类、命名、原理、组成结构及选用安装要求等。     

浅析中国的电子垃圾治理

本文分析了电子垃圾的成分、特征、危害以及中国电子垃圾现状,并在借鉴国外先进经验的基础上,进一步探讨了中国电子垃圾污染现状的原因和如何规范并合理地处理和回收电子垃圾,通过从法律、市场、企业和政府等多方面分析,提出了防治电子垃圾污染的建议和措施,同时呼吁社会各界共同关注电子垃圾对我们生存环境的影响,提高资源化废弃物和循环经济理念,提高全社会的环境保护意识,鼓励公众参与,这对促进中国经济的可持续发展和构建和谐社会具有重大意义。     

电子商务在环保产业的应用及前景

电子商务和环保产业是当今社会的两大热门话题，分析了两种新兴产业结合的可能性和电子商务在环保市场上的应用现状，同时也对其应用前景作了展望。     

电子产品故障物理模型研究与应用进展

提出了故障物理模型的基本概念,对几种常见的电子产品故障物理模型,包括互连热疲劳模型、互连振动疲劳模型、电迁移模型和与时间相关的介质击穿模型等进行了分析,总结提出了基于失效发生因素和失效发生过程的损伤模型建模等两种故障物理模型的建模方法。结合工程应用情况,对两种故障物理模型的应用方法——可靠性仿真分析方法和可靠性加速试验方法进行了讨论。最后对故障物理模型的研究进行了展望。