浅谈煤矿透水事故后外排酸性矿井水的治理

采用火焰原子吸收法对大同市“5．18”左云新井煤矿透水事故中所排酸性废水及其应急处理外排水中铁锰进行跟踪测定。结果表明，在废水处理过程中加入石灰石中和，脱铁脱锰，pH均值7．9，总铁浓度均值1．07mg／L，均达到污水综合排放标准。     

高吸附量有机聚合物的合成及其对亚甲基蓝吸附性能研究

为开发高效染料吸附剂,以丙烯酸（AA）、2-丙烯酰胺-2-甲基丙磺酸（AMPS）为单体,N,N''-亚甲基双丙烯酰胺为交联剂,γ-甲基丙烯酰氧基丙基三甲氧基硅烷（KH570）为偶联剂合成了一种新型有机聚合物（KAA）,并以红外光谱（FTIR）与扫描电镜（SEM）对其进行表征.选用典型阳离子染料亚甲基蓝（MB）为研究对象,研究KAA对MB的吸附动力学、吸附热力学以及溶液pH值和不同阳离子对吸附的影响.结果表明,实验浓度范围内KAA对亚甲基蓝的最大吸附量为1558 mg·g^-1,能够在1.5 h内达到吸附平衡,吸附动力学符合准一级动力学模型,吸附等温线符合通用等温模型（a general model）,吸附热力学数据表明吸附过程为自发、放热的熵减过程.KAA对亚甲基蓝的吸附具有较宽的pH适用范围,吸附剂具有良好的pH缓冲能力,阳离子对吸附具有较强的抑制作用,抑制作用大小为Al³⁺ > Ca²⁺ > Na⁺.研究表明吸附的主要驱动力为静电作用和π-π相互作用.与其他吸附剂相比,KAA对亚甲基蓝具有超高的吸附量以及酸碱耐受能力,更符合实际应用需求.     

易燃易爆场所静电事故链路及断链减灾模式

为了探究易燃易爆场所静电事故形成过程及防护机理,基于事故链式理论,以及静电点燃源形成过程和爆炸性环境形成过程这2条并行支链,绘制了易燃易爆场所静电事故链路;通过事故案例说明了静电事故链路的实用性;研究了静电荷、易燃/可燃物质在外界扰动作用下的特征形态。研究结果表明:静电事故断链减灾模式包括静电点燃源断链减灾模式、爆炸性环境断链减灾模式以及降低事故影响的事故后果断链减灾模式;针对静电事故的各类断链减灾模式,提出了相应的防护措施,可为易燃易爆场所静电事故防护提供系统性的指导方案。     

袋式与电袋复合除尘器的粉尘排放影响因子研究

袋式和电袋复合除尘器的粉尘排放来自于三个方面:透过滤料的粉尘及滤袋缝线处的粉尘和除尘器本体上泄漏点的粉尘。一般人们多注重滤料的捕集效率,而对其他2类粉尘泄漏源的研究较少,尤其是对滤袋缝线的粉尘泄漏影响几乎没有研究。通过大量的实验室试验数据和数值模拟计算,分析了这3种泄漏源对除尘器粉尘排放的影响程度,在此基础上,提出了粉尘要达到"超低排放"时应该采取的主要技术措施。     

湿式电除尘器给排水技术的研究与应用

湿式电除尘器是作为燃煤电厂大气污染治理的终端精处理设备的首选,但湿式电除尘器存在耗水量巨大、排出的灰水存在二次污染、内部件腐蚀严重等问题,严重影响了湿式电除尘器在国内燃煤电厂上的大型化应用。为此,对湿式电除尘器的喷淋给水、水质、灰水循环利用、废水排放等进行了研究分析并结合实际工程应用经验加以阐述,提出了科学合理的给水和排水方式,实现了湿式电除尘器在燃煤电厂工艺系统上的零水耗,有效解决了内部件腐蚀问题。     

Processes for sustainable development using high-intensity electric fields

Intense electric fields up to 10⁷ V/m generate very interesting and useful applications for the environment. Several processes using high electrical voltage for environment preservation were developed in the laboratory. The purpose of this study was to review these applications, highlighting their economic and environmental benefits: (1) electrostatic separators of particles used in industrial wastes recycling; (a) role-type electrostatic separator for granular mixtures of plastic–metal particles; (b) free-fall and rotating belt triboelectric separators for mixtures of plastic–plastic particles; (c) plate-type electrostatic separator for mixtures of metal–metal particles, (2) electrostatic precipitators for gas cleaning and (3) ozone generators for air and water treatment.     

Deposition and Resuspension of Selected Aerosols Particles on Electrically Charged Filter Materials for Respiratory Protective Devices

The primary aim of the study was to analyse the non-steady state of filtration for selected electrostatic filter materials designed for use in respiratory protective devices. The obtained results showed that the filtration process in electrostatic filters was dependent in the main on the following factors: type of the filter material, electrostatic field strength of the material, and the charge of the aerosol.

To a lesser degree the filtration process depended on the sign of the charge and the relative humidity of the air. A significant correlation was found between the increase in the penetration and the decrease in breathing resistance while the filter was being loaded.

The effect of resuspension (tearing off and re-deposition of dust agglomerates inside the filter) on the filtration process very significant. It was also observed that under certain conditions electrostatic filter materials lost their protection properties.     

油库静电危害综合控制方法的研究

油库是易燃、易爆的危险场所,当达到油气爆炸极限及产生静电放电时,极易发生油品静电灾害.通过对液体带电机理、油品能够产生静电的几种形式、影响静电电位因素以及静电能够引发火灾的几个条件的分析,提出了油库控制静电危害发生的措施.     

Reaction zone structures and propagation mechanisms of flames in stearic acid particle clouds

Reaction zone structures and propagation mechanisms of two representative flames established in stearic acid (CH₃(CH₂)₁₆CO₂H) particle clouds have been investigated. The reacting zone structure was examined by using a micro-electrostatic probe and a high-speed schlieren system. A distinct difference was observed in the ion current fluctuations recorded across the two representative flames propagating through the clouds of the same total mass density of particles and different mass densities of the particles smaller than 60 μm in diameter. When the mass density of smaller particles was high, a single peak was recorded in the ion current fluctuation. On the other hand, when the mass density of smaller particles was low, multi-peaks of various heights and widths were recorded. In the former case, the single peak was considered to be attributable to a unitary and a relatively thin flame started burning in vapor generated by the evaporation of smaller particles in the preheat zone. The flame propagation mechanism in this case was inferred to be similar to that of a usual hydrocarbon–air premixed flame, although the reaction zone thickness is much larger than that of the premixed flame. In the latter case, the multi peaks of various shapes were considered to be attributable to strong combustion at blue spots far behind the schlieren front. The flame propagation in this case was inferred to be supported by the heat release due to combustion at the blue spots.     

基于碳纤复合材料的可重复使用运载器静电防护研究

目的研究可重复使用运载器的静电防护方案。方法针对可重复使用运载器特点,以及飞行期间遭遇的空间静电放电环境,基于空间静电带电数学模型,计算出运载器表面材料带电离子的静电充电电位。在此基础上,分析复合材料静电特性,提出静电防护层与电气设备等电位共地方案。结果该方案采用碳纤维复合材料作为静电防护层,与大截面积的接地母线相连,为运载器电气设备提供低阻抗、大电荷容量的等电位地。结论该方案能够有效抵御静电产生的干扰,为运载器电子设备提供可靠、安全、抗干扰的电磁环境。另外,该方案工艺实现简单,大大减轻了运载器的设计质量。