砖瓦厂含氟废气的治理

通过实验选取了一种固氟剂添加到砖坯中后，砖块的存氟率为９１０％，烟道气总氟排放降低率为７６７８％。连续五年的生物检测试验，没有发生任何家蚕氟中毒现象。固氟剂的应用为砖厂含氟废气的治理提供了一条新的途径     

江苏省丹阳市水稻土自然生产潜力的初步研究

本文借助作物生长模型与模糊数学的方法对江苏省丹阳市的两种种植制度的土壤自然生产潜力进行了初步的分析研究。结果表明,模拟的小麦/玉米-晚稻种植制度的气候生产潜力比小麦-单季稻高3000kg/ha 左右。指出丹阳的小麦生产应以挖掘、提高土壤自然生产潜力为主,而单季稻的生产则应以提高品种的气候生产潜力为方向。     

船舶柴油机NOx后处理技术的进展

根据国内外的降低NOx排放方面最新的成果和科研动态，主要介绍了当前正在研究或者已经应用于实际的有效降低柴油机NOx排放的技术措施，并分析了各种技术方法的特点和在实际应用过程中面临的问题。     

典型黄土塬区不同植物措施水土保持效应分析

基于黄土高原典型黄土塬区2014-2016年的自然降雨数据及5种植被措施（乔木、灌木、撂荒、人工种草、耕地）下的坡面产流、产沙情况的观测数据,系统分析了不同植被覆盖措施下的黄土坡地水土流失对不同类型侵蚀性降雨的响应机制,结果表明：（1）降水集中于4-10月份,其中引发水土流失的侵蚀性降雨集中于7月、8月。（2）根据最大30分钟降雨强度I₃₀及降雨总量可将侵蚀性降雨分为5种类型,其中小雨量、小雨强类型的降雨是当地发生频率最多的侵蚀性降雨类型;降雨强度最大的Ⅴ雨型降雨侵蚀力最大,降雨量最大的Ⅰ雨型降雨侵蚀力次之,而Ⅱ雨型降雨侵蚀力最低;Ⅴ雨型在观测期内产流产沙量最大。（3）5种植被措施在不同降雨类型下均有明显的水土保持效应,在不同类型降雨下不同植物措施减沙率和减流率变化规律不同。研究结果对于黄土高原地区水土保持及资源可持续利用具有重要的指导意义。     

城市交通机动车污染控制研究进展

城市交通机动车污染问题非常复杂，在许多不可控因素，城市交通是一个动态系统，污染物排放量始终处于变化之中，控制城市交通污染，必须严格控制机动车排放，该文介绍了国内外对城市机动车污染控制研究的概况，以及几种城市中污染物扩散的模型，展望了这方面研究前发展趋势，并提出了可持续发展的效能系统设计与管理的新概念。     

次级燃料还原燃烧产物内NOx的动力学特性研究

提出了在燃煤电站锅炉炉膛内添加次级燃料建立ＮＯｘ的还原区，以控制ＮＯｘ的排放，建立了描述ＮＯｘ还原动态过程的数学模型和化学动力学模型，对计算值和实测值作了比较分析。     

江苏东沙的资源及其开发潜力

东沙是江苏岸外沙洲中面积最大、高程最高的一个沙滩,但尚未开发利用。本文据实地调查、海图卫片、文献资料,分析了东沙的土地资源、生物资源和能源的开发潜力,并就如何因地制宜、合理利用,提出了建议。     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.     

生产低硫汽油的新技术

介绍了我国及欧美等国家车用汽油标准中对硫含量的规定，以及降低催化汽油硫含量的几种工艺方法，特别是新发展起来的FCC脱硫助剂、FCC脱硫催化剂和膜分离等技术。采用新的脱硫技术可以在不同程度上降低催化汽油的硫含量。适应不同的脱硫要求，为炼油厂生产低硫汽油提供了更多的技术选择。     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.