上海市机动车污染实时排放预警系统设计与应用

研究上海市机动车污染的动态排放测算和网格化动态排放清单构建,在实时的交通数据和交通环境监测数据的基础上,结合交通模型、机动车排放清单模型等业务模型和算法,依托大数据存储、可视化和GIS等技术,开发了上海市机动车污染物实时排放预警系统,实现了上海市全市道路的机动车动态排放测算、交通环境政策实施情景模拟和网格化排放清单,更新频率为每30 min一次,包含PM、NOx、CO、SO2、VOCs等污染物和9种车型。系统建成后直接服务于首届中国国际进口博览会,为大气污染排放实时总量跟踪评估、污染源管控措施分析及监测成因分析等提供了有力的实时数据和技术支撑。     

Water Quality Evaluation and Trend Analysis in Selected Watersheds of the Atlantic Region of Canada

Water quality indices (WQIs) have been developed to assess the suitability of water for a variety of uses. These indices reflect the status of water quality in lakes, streams, rivers, and reservoirs. The concept of WQIs is based on a comparison of the concentration of contaminants with the respective environmental standards. The number, frequency, and magnitude by which the environmental standards for specific variables are not met in a given time period are reflected in WQIs. Further, the water quality trend analysis predicts the behavior of the water quality parameters and overall water quality in the time domain. In this paper, the concept of WQI was applied to three selected watersheds of Atlantic region: the Mersey River, the Point Wolfe River, and the Dunk River sites. To have robust study, two different water quality indices are used: Canadian Water Quality Index (CWQI), and British Columbia Water Quality Index (BWQI). The complete study was conducted in two steps. The first step was to organize and process the data into a format compatible with WQI analysis. After processing the input data, the WQI was calculated. The second step outlined in the paper discusses detailed trend analysis using linear and quadratic models for all the three sites. As per the 25 years trend analysis, overall water quality for agriculture use observed an improving trend at all the three sites studied. Water quality for raw water used for drinking (prior to treatment) and aquatic uses has shown improving trend at Point Wolfe River. It is further observed that pH, SO₄, and NO₃ concentrations are improving at Dunk River, Mersey River, and Point Wolfe River sites. To ascertain the reliability and significance of the trend analysis, a detailed error analysis and parametric significance tests were also conducted It was observed that for most of the sites and water uses quadratic trend models were a better fit than the linear models.     

辽河流域浑河沈阳段地表水重点控制有机污染物的筛选

采用美国环保局工业环境实验室提出的化学物质的“潜在危害指数法”,对辽河流域浑河沈阳段地表水和底质中检出的有机污染物的潜在危害进行了排序,参考国内外有毒化学品优先控制名单的筛选原则和方法,结合本流域的实际情况,制定出重点控制有机污染物的评分标准,提出辽河流域浑河沈阳段重点控制有机污染物名单。考虑到个别有机污染物在水中的浓度很低,但在底质中相对含量较高,所以将底质的检测结果也纳入评分标准。     

Status and Trends of Dissolved Oxygen in Corpus Christi Bay, Texas, U.S.A.

The purpose of this studywas to determine status and long-term trends of dissolved oxygen concentrations (DO) in Corpus Christi Bay, Texas, U.S.A. A 20-year record of randomized stations was used to determine the trend of surface water DO, salinity, and temperature over space and time. A 13-year record of two fixed stations was used to determine the temporal nutrient trends. A 10-year record of fixed stations in the southeastern region of Corpus Christi Bay was used to determine the status of disturbance caused by low DO in bottom waters. From 1982 to 2002, there was a significant decrease in surface water DO at a rate of 0.06 mg L⁻¹ yr⁻¹ and a significant increase in surface water temperature at a rate of 0.07°C yr⁻¹. The southeastern region of Corpus Christi Bay had the lowest average DO, and during July and August, DO are steadily declining at a rate of 0.09 mg L⁻¹ yr⁻¹. It is not likely that eutrophication is causing hypoxia, because freshwater inflow rates have significantly decreased since 1941 and nutrient levels have not changed from 1987 to 2000. Even though long-term trends indicate that average surface DO is decreasing, disturbance by hypoxia appears to be stable, but this may be due to just eight years of data. In fact, if the current trend continues, surface water DO will not meet exceptional aquatic life standards (≤5 mgL⁻¹) in 2032.     

Ecological Risk Assessment of Abandoned Shrimp Ponds in Southern Thailand

The potential ecological risks associated with contaminants from 15 abandoned shrimp ponds in southern Thailand were assessed at the screening level. Shrimp ponds reported as out of production for more than 2 years were selected as sampling sites. The assessment endpoint was identified as the protection of aquatic life from hazard of multiple agents or stressors in water or sediment from the ponds. The measurement endpoints were amount of toxic phytoplankton species, Yellow Head Viruses, SEMB viruses, oxytetracycline, cadmium, copper, and manganese. Data from field measurements and laboratory analyses obtained primarily from April to June 2003 were used in the risk analysis. The results showed that insignificant amounts of stressors were present, except for the metals. So, only concentration values of the metals were used in the calculation of hazard quotients (HQ) for risk characterization. The highest potential ecological risk characterized by the highest HQ value observed for each metal was 19 for manganese, 4.3 for cadmium, and 1.8 for copper. These findings indicated a need for further ecological risk assessment at a more detailed level to focus on the bioavailability and effects of metals from abandoned shrimp farms, with manganese the highest priority.     

Evaluation of Water Quality in the Chillán River (Central Chile) Using Physicochemical Parameters and a Modified Water Quality Index

The Chillán River in Central Chile plays a fundamental role in local society, as a source of irrigation and drinking water, and as a sink for urban wastewater. In order to characterize the spatial and temporal variability of surface water quality in the watershed, a Water Quality Index (WQI) was calculated from nine physicochemical parameters, periodically measured at 18 sampling sites (January–November 2000). The results indicated a good water quality in the upper and middle parts of the watershed. Downstream of the City of Chillán, water quality conditions were critical during the dry season, mainly due to the effects of the urban wastewater discharge. On the basis of the results from a Principal Component Analysis (PCA), modifications were introduced into the original WQI to reduce the costs associated with its implementation. WQI_DIR2 and WQI_DIR, which are both based on a laboratory analysis (Chemical Oxygen Demand) and three (pH, temperature and conductivity), respectively, four field measurements (pH, temperature, conductivity and Dissolved Oxygen), adequately reproduce the most important spatial and temporal variations observed with the original index. They are proposed as useful tools for monitoring global water quality trends in this and other, similar agricultural watersheds in the Chilean Central Valley. Possibilities and limitations for the application of the used methodology to watersheds in other parts of the world are discussed.     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

Ambient Air Quality Monitoring Network Design for Assessing Human Health Impacts from Exposures to Airborne Contaminants

Existing methods of establishing ambientair quality monitoring networks typically evaluateonly parameters related to ambient concentrations ofthe contaminant(s) of interest such as emissionsource characteristics, atmospheric transport anddispersion, secondary reactions, depositioncharacteristics, and local topography. However,adverse health risks from exposures to airbornecontaminants are a function of the contaminant andthe anatomic and physiologic characteristics of theexposed population. Thus, ambient air qualitymonitoring networks designed for the protection ofpublic health or for epidemiological studiesevaluating adverse health impacts from exposures toambient air contaminants should account for bothcontaminant characteristics and human healthparameters. A methodology has been establishedwhich optimizes ambient air quality monitoringnetworks for assessments of adverse human healthimpacts from exposures to airborne contaminants byincorporating human health risk assessmenttechniques. The use of risk assessment techniquesas the basis for designing ambient air qualitymonitoring networks will help to target limitedfinancial and human resources to evaluate humanhealth risks from exposures to airbornecontaminants.     

Climate impact on social systems: the risk assessment approach

A novel approach to the problem of estimating climate impact on social systems is suggested. This approach is based on a risk concept, where the notion of critical events is introduced and the probability of such events is estimated. The estimation considers both the inherent stochasticity of climatic processes and the artificial stochasticity of climate predictions due to scientific uncertainties. The method is worked out in some detail for the regional problem of crop production and the risks associated with global climate change, and illustrated by a case study (Kursk region of the FSU). In order to get local climatic characteristics (weather), a so-called statistical weather generator is used. One interesting finding is that the 3% risk level remains constant up to 1.0–1.1°C rise of mean seasonal temperature, if the variance does not change. On the other hand, the risk grows rapidly with increasing variance (even if the mean temperature rises very slowly). The risk approach is able to separate two problems: (i) assessment of global change impact, and (ii) decision making. The main task for the scientific community is to provide the politicians with different options; the choice of admissible (from the social point of view) critical events and the corresponding risk levels is the business of decision makers.     

RISK ASSESSMENT METHODOLOGY FOR KARST AQUIFERS: (2) SOLUTE-TRANSPORT MODELING

Ground-water flow and solute-transport simulation modeling are major components of most exposure and risk assessments of contaminated aquifers. Model simulations provide information on the spatial and temporal distributions of contaminants in subsurface media but are difficult to apply to karst aquifers in which conduit flow is important. Ground-water flow and solute transport in karst conduits typically display rapid-flow velocities, turbulent-flow regimes, concentrated pollutant-mass discharge, and exhibit open-channel or closed-conduit flow. Conventional ground-water models, dependent on the applicability of Darcy`s law, are inappropriate when applied to karst aquifers because of the (1) nonapplicability of Darcian-flow parameters, (2) typically nonlaminar flow regime, and (3) inability to locate the karst conduits through which most flow and contaminant transport occurs. Surface-water flow and solute-transport models conditioned on a set of parameters determined empirically from quantitative ground-water tracing studies may be effectively used to render fate-and-transport values of contaminants in karst conduits. Hydraulic-flow and geometric parameters developed in a companion paper were used in the surface-water model, TOXI5, to simulate hypothetical slug and continuous-source releases of ethylbenzene in a karst conduit. TOXI5 simulation results showed considerable improvement for predicted ethylbenzene-transport rates and concentrations over qualitative tracing and analytical ground-water model results. Ethylbenzene concentrations predicted by TOXI5 simulations were evaluated in exposure and risk assessment models.