Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid(OA) on the immobilization of Pb(Ⅱ) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(Ⅱ) by KH2PO4, phosphate rock(PR), activated phosphate rock(APR) and synthetic hydroxyapatite(HAP) at different phosphate:Pb(P:Pb) molar ratios(0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or Ca Cl2, Community Bureau of Reference(BCR) sequential extraction and toxicity characteristic leaching procedure(TCLP)methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was 5 mg/L for the red soil at P:Pb molar ratio 4.0. Water-soluble Pb could not be detected and the TCLP-Pb was 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APR was most effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pb molar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

海上溢油应急物资调度双目标规划模型

为最大程度降低溢油事故造成的不利影响,提出充分考虑海上油膜漂移特性及溢油点和漂移点对救援物资需求不确定等特点,基于鲁棒优化思想,建立救援应急成本最小、应急时间最短的双目标规划模型,并基于NSGA-Ⅱ算法设计求解方法.结果 表明:决策者可根据自身对溢油事故规模的判断,得到不同应急物资调度方案,为应急出救点的选择和物资调度...     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

机器学习在材料服役性能预测中的应用

针对材料服役性能预测存在误差大、计算复杂、适用性差等问题,提出了基于数据挖掘的机器学习预测方法。首先阐述了机器学习的应用流程,并总结了常用模型原理及其在材料性能预测中的应用。然后采用多种机器学习模型对RPV钢的辐照性能进行预测,并通过Stacking集成方法提高了模型的预测精度。结果表明,机器学习可用于材料服役性能预测,具有较高的预测精度和可靠性。根据材料服役数据的不同特征选择合适的学习模型,同时进行模型融合和参数优化,可有效提高模型的预测精度及运算速度。     

车用高分子材料不同地区户外曝晒试验相关性研究

目的将3种高分子材料以及3种车用外饰材料分别投放在中国海南琼海和美国佛罗里达州2种典型湿热环境中进行户外曝晒试验,研究气候相似的2种地区的试验相关性。方法通过测试相同时间间隔下不同材料在2处试验场曝晒过程中的黄变程度,表征材料的老化现象。采用斯皮尔曼等级相关系数的统计方法,研究材料在2个地区相同时间节点的试验结果的相关性,并利用时间同轴的作图方法比较2个地区严酷度的差异。结果琼海与佛罗里达州2个地区在各个时间节点的相关系数接近于1,且在材料黄变方面呈现一定比例关系。结论琼海和佛罗里达州2个地区的试验结果呈现出较好的相关性,且严酷度比值约为琼海︰佛罗里达=1︰1.19。     

有机阳离子型电荷杀菌材料研究现状及展望

细菌等致病微生物可通过空气、水、土壤、食物等途径在自然界中传播,易对人体造成诸如肺结核、淋病、鼠疫等健康风险。目前广泛使用的灭菌方式包括紫外线、臭氧、氯气、电荷等物理或化学方法,其中电荷杀菌因具有无组织毒性的优点被广泛使用。研究表明：有机阳离子型电荷杀菌材料相比传统的金属离子杀菌材料具有抗菌效能优异、不产生耐药性、生物安全性高等优点,其杀菌性能受分子大小、烷基链、反离子类型、电荷密度等因素影响。本文系统综述了目前有机阳离子型电荷杀菌材料的类型、结构特征、杀菌性能及影响因素,抗菌机理及应用现状,分析了其存在的问题和发展方向,为有机阳离子型电荷杀菌材料的后续研究和应用提供一定的借鉴和指导。     

Fatty acids and algal lipids as precursors of chlorination by-products

Six common algal fatty acids (FAs) with different numbers of double bonds, lipophilic fractions and proteins extracted from the diatom Navicula pelliculosa and algal cells were chlorinated to evaluate their potential in generating disinfection by-products (DBPs). The result showed that the more double bonds in the FAs, the higher the amounts of chloroform and dichloroacetic acid (DCAA) produced, but such a pattern was not observed for trichloroacetic acid (TCAA). Based on the previously reported composition of fatty acids in algal lipids, the DBP generation potentials of algal lipids were calculated. These predicted values were much lower than those measured in the chlorinated algal lipophilic fraction, suggesting unknown lipophilic fraction(s) served as potent DBPs precursors. Another calculation attempted to predict DBP production in algal cells based on algal lipid and protein composition, given quantified measured DBP production per unit algal lipid and proteins. The analysis showed that the observed DBP production was similar to that predicted (< 35% difference), suggesting that algal biochemical compositions may serve as a bioindicator for preliminary estimation of chloroform, DCAA and TCAA formation upon chlorinating algae.     

金属材料腐蚀疲劳研究进展

首先归纳了金属材料的腐蚀疲劳裂纹萌生机理和扩展机制,从材料自身因素、外界力学因素和环境因素三方面分析了腐蚀疲劳影响因素,简要介绍了环境腐蚀-疲劳载荷交互试验和环境腐蚀-疲劳载荷协同试验研究现状及重要性,并展望了金属材料腐蚀疲劳今后研究的重要方向,为金属材料腐蚀疲劳的试验开展、机理探索和工程应用奠定基础。     

Dissolved Ions of Trace and Major Elements and in Suspended Sediments in the Nile, Egypt

Dissolved ions and suspended participates from twelve water samples from Sohag (different localities) and Aswan (behind and below the High Dam) areas were collected along the River Nile, upper Egypt, which is at present affected seriously by pressure of population, intense industrial and agricultural activities, and atmospheric fallout. Eighteen trace and nine major ions in solution and fourteen metals in suspension were analyzed to establish whether elements are of anthropogenic or natural origin. Results of this study show that the Nile water was contaminated with high concentrations of dissolved lead, and with copper, nickel and mercury to a lesser extent, suggesting that these contaminants are generated from anthropogenic activities. the other dissolved ions in the Nile are of natural origin because their metal concentrations fall within the range of the normal background and average world dissolved values for inland waters. Results show that the usual constituents of suspended particulates in the Nile seem to be some metals (Cu and Zn) adsorbed on iron and manganese oxide/hydroxide. the results also reveal that most trace and major metal particulates increase from south to north due to activities associated with the dense population living along the Nile banks. No significant differences were observed between the chemical composition of trace and major elements taken on the east and west river Nile banks.     

HMX与低熔点含能材料混合物的热安定性研究

目的 研究环四亚甲基四硝胺(HMX)与2,4,6-三硝基甲苯(TNT)、2,4-二硝基苯甲醚(DNAN)、3,4-二硝基呋咱基氧化呋咱(DNTF)3种低熔点、高挥发性含能材料混合后的热安定性及相关性质.方法 将HMX与3种低熔点含能材料按照质量比1:1进行混合,采用动态测压热分析法(DPTA)、差示扫描量热法(DSC)...