Determination of turbulent burning velocities of dust air mixtures with the open tube method

Correlating turbulent burning velocity to turbulence intensity and basic flame parameters-like laminar burning velocity for dust air mixtures is not only a scientific challenge but also of practical importance for the modelling of dust flame propagation in industrial facilities and choice of adequate safety strategy. The open tube method has been implemented to measure laminar and turbulent burning velocities at laboratory scale for turbulence intensities in the range of a few m/s. Special care has been given to the experimental technique so that a direct access to the desired parameters was possible minimising interpretation difficulties. In particular, the flame is propagating freely, the flame velocity is directly accessible by visualisation and the turbulence intensity is measured at the flame front during flame propagation with special aerodynamic probes. In the present paper, those achievements are briefly recalled. In addition, a complete set of experiments for diametrically opposed dusts, starch and aluminium, has been performed and is presented hereafter. The experimental data, measured for potato dust air mixtures seem to be in accordance with the Bray Gülder model in the range of 1.5 m/s<u′<3.5 m/s. For a further confirmation, the measurement range has been extended to lower levels of turbulence of u′<1.5 m/s. This could be achieved by changing the mode of preparation of the dust air mixture. In former tests, the particles have been injected into the tube from a pressurised dust reservoir; for the lower turbulence range, the particles have been inserted into the tube from above by means of a sieve–riddler system, and the turbulence generated from the pressurised gas reservoir as before. For higher levels of turbulence, aluminium air mixtures have been investigated using the particle injection mode with pressurised dust reservoir. Due to high burning rates much higher flame speeds than for potato dusts of up to 23 m/s have been obtained.     

Influence of the oxide content on the ignition energies of aluminium powders

Some results of determination of ignition energies for an aluminium powder with various oxide contents are presented. Common use of processes like high-speed cutting produce explosive dust clouds, so that we focused this study on hazard of metallic powders. An industrial aluminium powder has been used for this work. An original process, based on the principle of electrochemical anodisation, has been developed to increase, under control, the oxide coating of particles.

The sensitivity study to spark ignition was performed in an Hartmann explosion tube of 1.3L. The Langlie test method was applied to evaluate the energies leading to a probability of ignition of 50% (E₅₀) of the selected samples. The results confirm that the ignition energies increase with the oxide content of the powder.     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.     

OPTIMAL WATER USE AND SALINITY CONTROL FOR ENERGY - UPPER COLORADO RIVER BASIN1

ABSTRACT: The Upper Colorado River Basin contains appreciable amounts of undeveloped fuel resources. Large quantities of oil shale, coal, and uranium have attracted recent economic and commercial interests. Development of these resources and subsequent conversion to alternative energy forms require an adequate supply of water. Water use for large scale energy development will place increasing demands on an already overstressed allocation of Colorado River water. Present water quality is at a concentration where increased salinity will result in economic detriments to holders of downstream water rights. The salt and water exchange in mining, processing, and spent fuel disposal processes has been incorporated as part of a two-level minimum cost linear programming algorithm. Mathematical simulation results provide an optimal use of Upper Colorado River water for levels of energy output such that salinity concentrations are maintained below predetermined levels.     

PHREATOPHYTE EVAPOTRANSPIRATION AND ITS POTENTIAL REDUCTION WITHOUT ERADICATION1

ABSTRACT: The continuous availability of ground water to riparian phreatophytic vegetation results in large evapotranspiration (ET) losses in summer. Chemical or physical eradication of this vegetation can have undesirable environmental side effects. Spraying phreatophyte foliage with a nontoxic antitranspirant (AT) may reduce transpiration without eradication. Transpiration rate per unit leaf area was similar for several phreatophyte species, but ET per unit land area of phreatophytes depneds more on stand density than species. The mean ET for saltcedar in June was 8.1 mm/day measured by Bowen ratio, compared with 7.9 mm by lysimeters. ATs and growth-retardants reduced transpiration by over 50 percent in laboratory tests where foliage was thoroughly sprayed. In the field AT sprayed by a back-pack mistblower reduced ET by 20–35 percent initially and 10 percent after a month. No ET reduction occurred when AT was sprayed by helicopter on saltcedar, because excessive droplet size and heavy salt deposits on the foliage resulted in poor spray adherence. Wax-based AT was relatively nontoxic to fish and wildlife. Dissolved oxygen could be reduced for aquatic life, but further AT dilution in streams and ponds would minimize this. Helicopter spraying may affect bird nests and egg hatchability. Although ATs significantly reduce ET, their high cost and spraying difficulties preclude current use on phreatophytes. With improvement they may economically help to conserve water in riparian areas in future years.     

A quantitative succession model for nine montana forest communities

A quantitative succession model was developed both to meet resource management needs in Montana's Lewis and Clark National Forest and to develop a modeling methodology. It builds upon previous concepts and incudes three new features: quantitative prediction of all tree species and seedlings; quantitative predictions of important understory species; and successional pathways determined by fire intensity and scorch height. The method is described and demonstrated for selected Montana habitat (community) types. It is also available in managerial guidelines and has been programmed as a new module in theforplan simulator. Weaknesses of this and other models are discussed. Conclusions relate succession modeling to resource management needs.     

Health and safety implications of alternative energy technologies. I. Geothermal and biomass

An evaluation of potential occupational and public health aspects of geopressure, hydrothermal, hot dry rock, silviculture, crop and animal residues, fermentable plant products, municipal waste, and plantation energy technologies has been performed. Future development of these energy options in the United States will contain hazards that could easily be eliminated by safer equipment design and common-sense attention to operation and maintenance. Occupational exposure to hydrogen sulfide gas occurs near all geothermal sites and wherever organic matter decomposes anaerobically. Respiratory damage has occurred to laborers in geothermal fields, while farm workers have been fatally overcome when employed near agitating liquid manure systems. However, the most frequent and severe of reported injuries to geothermal workers is dermal exposure to caustic sludges produced by H₂S abatement systems.Principal health and safety considerations of biomass pathways are directly related to the diffuse nature of solar energy fixation by photosynthesis and subsequent transfer to animal food chains. Since the potential fuel is in an unconcentrated form, cultivation, harvest, and transport are necessarily laborintensive. Thus, a significant potential for occupational injuries and fatalities exists. Of all biomass systems evaluated, direct burning of solid fuels presents the greatest public health risk. Data are presented to characterize the population at risk and the frequency and severity of injuries.Operated by Union Carbide Corporation under contract W-7405-eng-26 with the U.S. Department of Energy.     

WATER SUPPLY AS A LIMITING FACTOR IN WESTERN ENERGY DEVELOPMENT1

ABSTRACT: This paper discusses the consumptive water needs of the various energy conversion processes including oil shale retorting, coal gasification and liquefaction, electric power generation, and slurry pipelines. Projected energy development water needs in the upper Colorado River and Upper Missouri River basins are compared with projected agricultural needs and water available. The comparative cost and values of water to energy and agricultural development are discussed to emphasize this as well as the political and social factors entering into the picture.     

MANAGEMENT ASPECTS OF CYCLIC STORAGE OF WATER IN AQUIFER SYSTEMS1

ABSTRACT: Most of California's precipitation falls at the wrong place in the wrong season in relation to the water needs. Redistribution and regulation are essential. Aquifer systems – groundwater basins – can provide a share of the future cyclic storage regulation. There are some differences in management concepts in using a full basin in comparison with a partially dewatered basin. Legal, water quality, and physical impacts on aquifer systems, including subsidence, are concerns. Storage may be for the benefit of overlying water users or for distant areas. Extraction during dry periods or recharge methods will require careful planning. Existing rights and uses and equitable treatment of all parties must be assured. Financial compensation may be involved. Changes in methods of operation or degree of self-determination by affected water agencies will require committed watermanship to resolve. Legislation or amendments to organic acts may be needed but much can be accomplished within existing statutes. Environmental impacts which can be avoided by not using large surface storage sites are important. Energy for pumping will be a key consideration. About 40 percent of California is underlain by aquifer systems. This resource offers major potential in overcoming the maldistribution of natural water resources.     

SOCIAL OVERHEAD CAPITAL COSTS OF IRRIGATION DEVELOPMENT IN WASHINGTON STATE1

ABSTRACT: Increased irrigation as a means of achieving economic development can impose significant social costs on the state or region of growth. The growth in population induced by additional irrigation will require new roads, water and sewage facilities, schools, fire and police protection, etc. Also the increased energy demands due to irrigation and growth in economic activity must be met. Capital investments required to service these needs of new development can become very large. This study attempts to measure such social overhead costs or irrigation development for some specific irrigation project areas of Eastern Washington. It is shown that investment costs in overhead items can reach $2,000 per acre irrigated or $70,000 per job created. Alternatively, the annual costs can equal $180 per acre or $6,700 per worker. These costs must be paid locally through increased taxes, utility rates, or costs for services.