ESTIMATION OF ENERGY REQUIREMENTS OF MORNING DEW EVAPORATION FROM LEAF SURFACES1

ABSTRACT: Evapotranspiration from vegetation is generally computed without consideration for early morning energy loss involved in drying wet leaf surfaces. In humid areas where dew formation is frequent, estimation of energy requirements for evaporating dew should be of interest. In this study, sensible heat flux (H) was computed from wind and temperature profile measurements over the study site. A leaf wetness sensor was used to measure the duration of evaporation from an exposed leaf surface, and net radiation was measured with a radiometer. The energy flux during the period of wet leaf surface evaporation was integrated over time. A cattail lysimeter situated at the site indicated the time when evapotranspiration started after wet leaves were dry. The energy requirements to dry an exposed wet leaf surface was estimated using energy balance methods. The mean value based on 44 days of observations from mid February to early May of 1993 indicates that the energy required to evaporate dew from openly exposed wet leaves was 5 percent of the total daily evapotranspiration of cattails with a coefficient of variation of 0.72. The mean time required to evaporate dew from exposed leaf surfaces from the onset of positive net radiation was 78 minutes. The mean dew evaporation in a morning from an exposed leaf surface was 0.16 mm with a maximum value of 0.41 mm. The energy required to dry wet leaves is a factor that should be considered when modeling evapotranspiration at hourly or shorter time intervals. Also, physical evapotranspiration models need to account for energy requirements for drying dew and rainfall wetted leaves.     

Effects of increased wood energy consumption on carbon storage in forests of the United States

Large but feasible increases that have been projected for the production of wood energy in the United States can be expected to significantly alter the current carbon storage patterns in US forest vegetation. The 1976 net wood increment left after forest cutting equals about 136 × 10⁶ tons of carbon/year, with about 60% of the increment found in merchantable trees, and the remainder in nonmerchantable components.Achieving 5–10 quads of wood energy beyond 1976 levels by the year 2010 can significantly change current carbon storage patterns with the magnitude of change dependent on the extent of residue harvest to meet energy goals, and the rate of future forest growth. Complete loss of the apparent net wood increment is a possible outcome.Although the future growth and harvest situation cannot be known now, a range of possible scenarios suggests that US forests in the year 2010 will store much less carbon than today, thus significantly changing their role in the global carbon cycle.     

都西庙水库生物群落的牧食链结构与渔业利用

都西庙水库初级生产者只有浮游植物,它对太阳能年总辐射量的利用率为0.07%,生态学效率分别为10.5%、0.26%、6.40%,综合鱼产力为17.8g/m~2,各种经济鱼类对浮游植物的能量利用率为0.55%,表明牧食链中能量流动与分配不合理。本文对科学利用和保护该库饵料资源提出了建议。     

Economics and energetics of organic and conventional farming

The use of organic farming technologies has certain advantages in some situations and for certain crops such as maize; however, with other crops such as vegetables and fruits, yields under organic production may be substantially reduced compared with conventional production. In most cases, the use of organic technologies requires higher labor inputs than conventional technologies. Some major advantages of organic production are the conservation of soil and water resources and the effective recycling of livestock wastes when they are available.     

STABILITY AND REACH LENGTH IN WATER SURFACE PROFILE DETERMINATION1

ABSTRACT: Extension of basic step methods of backwater computation to reaches of finite length is examined. Accuracies of commonly accepted hydraulic loss equations under particular water surface profile conditions are compared. Simulation of energy lines within a reach by parabolic curves is found to minimize error provided orientation of the axis of the parabola is selected in accordance with prevailing hydraulic conditions. Theoretical basis for an index reach length beyond which single-step computation from end to end of the reach must be in error is developed. Reduction of this reach length by suitable factors tailored to hydraulic conditions yields a mathematically defined allowable reach length for backwater computation. When reach length does not exceed this allowable reach length, no significant error may be detected. Automatic insertion of synthetic cross sections interpolated between surveyed cross sections when these are inadvertently spaced too far apart enables computation to proceed. This device is error-free for prismatic channls but may introduce error for irregular natural channels. Preliminary trials indicate that results so obtained may be accepted provided the fall in the original reach does not exceed from one to two feet. When this is exceeded, additional cross sections should be surveyed.     

Policy conflicts in the siting of natural gas pipelines

ABSTRACT

Researchers often focus on the most intense conflicts, skewing our perception of the diversity and nature of policy conflicts. The paper examines the discourse engaged in the siting of three pipeline projects under construction, each with varying levels of conflict, and one rejected project of high conflict. We analyze over 700 newspaper articles that span the life of each proposed pipeline and supplement the news media data with interviews. Using these data, we compare differences in actor types, frames, and behaviors in natural gas pipeline siting processes characterized by high, medium, and low conflict. Comparing the characteristics of energy siting conflicts at varying intensities helps support corresponding portrayals of how people engage in the policy process. This paper offers theoretical and empirical guidance on understanding policy conflict intensity variation.     

Cracking the Achilles’ heel of energy performance contracting projects: the credit risk identification method for clients

ABSTRACT

A credit risk identification model is established to examine the credit status of Energy performance contracting (EPC) project clients (i.e., energy-using companies) in China based on rough set theory. The model is verified with data from 120 listed companies at different times. Study shows that lack of credit is one of the main obstacles to the implementation of EPC projects, and information asymmetry is the main reason for this lack of credit among potential clients in China. The credit risk identification method based on rough set theory can make up for the shortcomings of existing EPC projects in terms of credit risk identification, including redundant information and indicators, and unclear decision rules. Credit risk identification indicators of clients are dynamic. The research results can help energy service companies (ESCOs) determine the credit status of clients, facilitate cooperation between ESCOs and clients, and help explain the various dynamics of clients’ credit risk identification indicators over time.     

A convective wind resource model for Solar Vortex power generation

ABSTRACT

Climate change has increased the need for clean, nonpolluting energy sources to decrease dependence on fossil fuels. Alternative energy sources, mainly solar and horizontal wind, have been the primary focus for producing clean energy. New technologies are being developed, such as the Solar Vortex (SoV), which was developed at the Georgia Institute of Technology, and relies on a vertical wind resource to generate power. The National Renewable Energy Lab (NREL) has resource models representing solar and horizontal wind resources across the 48 United States. This research developed a vertical wind resource model that is comparable in resolution to NREL’s solar and horizontal wind resource models and uses the model for estimating power output for the SoV. This model complements NREL’s existing resource models and supports the deployment of an additional clean energy generation technology. The model was applied to Mesa, Arizona to find feasible sites for a small-scale vertical wind farm.     

Integrated energy management strategy of powertrain and cooling system for PHEV

ABSTRACT

Energy management strategy (EMS) is crucial in improving the fuel economy of plug-in hybrid electric vehicle (PHEV). Existing studies on EMS mostly manage powertrain and cooling system separately which cannot get the minimum total energy consumption. This paper aims to propose a novel EMS for a new type of dual-motor planetary-coupled PHEV, which considers cooling power demand and effect of temperature on fuel economy. Temperature-modified engine model, lithium-ion battery model, two motors, and cooling system models are established. Firstly, the separated EMS (S-EMS) is designed which manages powertrain and cooling system separately. Sequentially, after the analysis of thermal characteristics of the powertrain and cooling system, the thermal-based EMS (T-EMS) is then proposed to manage two systems coordinately. In T-EMS, cooling power demand and the charging/discharging energy of motors are calculated as equivalent fuel consumption and integrated into the object function. Besides, a fuzzy controller is also established to deicide the fuel-electricity equivalent factor with consideration of the effect of temperature and state of charge on powertrain efficiency. Finally, the hardware-in-loop experiment is carried out to validate the real-time effect of EMS under the New European Driving Cycle. The result shows that cooling power demand and temperature can significantly affect the fuel economy of the vehicle. T-EMS shows better performance in fuel economy than S-EMS. The equivalent fuel consumption of the cooling system of T-EMS decreases by 27% compared with that of S-EMS. The total equivalent fuel consumption over the entire trip of PHEV using T-EMS is reduced by 9.7%.     

Natural gas engine driven heat pump system – a case study of an office building

ABSTRACT

An eQUEST model was developed to conduct a simulation study of a natural gas engine-driven heat pump (GEHP) for an office building in Woodstock, Ontario, Canada. Prior to the installation of the GEHP, the heating and cooling demands of the office building were provided by rooftop units (RTUs), comprising of natural gas heater and electric air conditioner. Energy consumption for both GEHP and RTUs were monitored for operation in alternating months. These recorded energy consumptions along with weather data were used in the regression analysis. The developed eQUEST models were validated and calibrated with the regression analysis results with respect to the ASHRAE Guideline 14–2014. The eventual models were then applied to investigate the potential annual energy consumption, greenhouse gas (GHG) emission and energy cost savings achieved by using the GEHP in Woodstock, and other cities in Canada, particularly in Ontario.