Guidelines for life extension process management in oil and gas facilities

Facilities life extension has caught the attention among the capital-intensive industries, like oil and gas. By extending the life cycle of the industrial assets, a wide range of benefits is obtained, comparing with other life ending management strategies. This article first contextualizes the implementation of the life extension concept in the oil and gas industry, showing global data about life extension. Despite the importance of the ageing process, due to its great economic impact and the risk it poses to the production sector, regulatory entities, even in countries more advanced in that sector or that have already experienced the extension process, developed only superficial material about the topic without defining a structured methodology for the assessment of the possibility of useful life extension. The available references do not allow a comprehensive analysis of that possibility, which highlights the importance the methodology proposed. Thus, this article proposes a guideline for the life extension process management, strengthening a framework containing the main evaluation stages, aiming to facilitate the analysis of issues related to ageing and to support the decision-making process. Lastly, real case studies regarding current life extension processes submitted to the Brazilian regulatory body were evaluated against the proposed framework stages, evidencing their lack of necessary details to support the decision-making. Upon the realization that the real cases identified do not allow for the assessment of the contribution and adequacy of the proposed framework in its entirety, the same was also applied to a hypothetical case. The latter was developed based on facts reported by a major operator in Brazil. The result was the determination that the use of the proposed methodology transformed the assessment of the possibility of life extension into a systematic and transparent process, leading to easier and better-founded decision-making procedures, and improving the management of the asset during its extended life.     

预氧化+混凝沉淀+MAP预处理畜禽养殖废水研究

畜禽养殖废水由于具有高COD、高SS、高氨氮等特点,属于高浓度难降解废水,不宜直接采用生化处理,需对其进行预处理。试验采用预氧化+混凝沉淀+MAP对畜禽养殖废水进行预处理。结果表明:预氧化+混凝沉淀+MAP沉淀预处理畜禽养殖废水具有极强的可行性,同时当次氯酸钠投加量为1260 mg/L,PAC为700 mg/L,PAM投加量为10 mg/L时,处理效果最佳,并且药剂投加不宜采用同步进行,适宜先进行预氧化,然后进行强化混凝,最后采用MAP沉淀法处理畜禽养殖废水,可以达到更好的预处理效果,提高可生化性。     

某市河道底泥污染工程总体设计方案

为截流和处理某市内河的外来污染源,河道综合整治工程是某市内河水系底泥污染系统综合开发工程的重要工程之一,主要内容包括:河道工程、截污工程、底泥疏浚、景观工程等。截污工程采取“沿河截污,超量溢流”的工程方案沿河敷设截污管道,并在河道交汇处设置合流污水调蓄池。     

Evaluation of radioxenon releases in Australia using atmospheric dispersion modelling tools

The origin of a series of atmospheric radioxenon events detected at the Comprehensive Test Ban Treaty Organisation (CTBTO) International Monitoring System site in Melbourne, Australia, between November 2008 and February 2009 was investigated. Backward tracking analyses indicated that the events were consistent with releases associated with hot commission testing of the Australian Nuclear Science Technology Organisation (ANSTO) radiopharmaceutical production facility in Sydney, Australia. Forward dispersion analyses were used to estimate release magnitudes and transport times. The estimated ¹³³Xe release magnitude of the largest event (between 0.2 and 34 TBq over a 2 d window), was in close agreement with the stack emission releases estimated by the facility for this time period (between 0.5 and 2 TBq). Modelling of irradiation conditions and theoretical radioxenon emission rates were undertaken and provided further evidence that the Melbourne detections originated from this radiopharmaceutical production facility. These findings do not have public health implications. This is the first comprehensive study of atmospheric radioxenon measurements and releases in Australia.     

The influence on the radioxenon background during the temporary suspension of operations of three major medical isotope production facilities in the Northern Hemisphere and during the start-up of another facility in the Southern Hemisphere

Medical isotope production facilities (MIPF) have recently been identified to emit the major part of the environmental radioxenon measured at many globally distributed monitoring sites deployed to strengthen the radionuclide component of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) verification regime. Efforts to raise a global radioxenon emission inventory revealed that the yearly global total emission from MIPF’s is around 15 times higher than the total radioxenon emission from nuclear power plants (NPP's).Given that situation, from mid 2008 until early 2009 two out of the ordinary hemisphere-specific events occured:1) In the Northern hemisphere, a joint temporary suspension of operations of the three largest MIPF's made it possible to quantify the effects of the emissions related to NPP’s. The average activity concentrations of ¹³³Xe measured at a monitoring station close to Freiburg, Germany, went down significantly from 4.5 ± 0.5 mBq/m³ to 1.1 ± 0.1 mBq/m³ and in Stockholm, Sweden, from 2.0 ± 0.4 mBq/m³ to 1.05 ± 0.15 mBq/m³.2) In the Southern hemisphere the only radioxenon-emitting MIPF in Australia started up test production in late November 2008. During eight test runs, up to 6.2 ± 0.2 mBq/m³ of ¹³³Xe was measured at the station in Melbourne, 700 km south-west from the facility, where no radioxenon had been observed before, originating from the isotopic production process.This paper clearly confirms the hypothesis that medical isotope production facility are at present the major emitters of radioxenon to the atmosphere. Suspension of operations of these facilities indicates the scale of their normal contribution to the European radioxenon background, which decreased two to four fold. This also gives a unique opportunity to detect and investigate the influence of other local and long distance sources on the radioxenon background. Finally the opposing effect was studied: the contribution of the start-up of a renewed radiopharmaceutical facility to the build up of a radioxenon background across Australia and the Southern hemisphere.     

黄浦江上游原水强化处理选炭试验研究

以黄浦江上游水源为原水,通过煤质炭、竹质炭、椰壳炭等炭种筛选小试和中试试验,研究了黄浦江上游原水中有机污染物强化去除的最佳炭种及其最佳投加量。结果表明黄浦江上游原水中投加PAC能够改善处理后水质,提高原水中有机物的去除效果;并且随着PAC投加量的增加,原水中有机物去除效果增强;综合性价比、碳源等因素确定竹质炭较为经济合理;当竹质炭投加量为10～15mg/L时,处理后出水CODMn可达到3mg/L或以下。     

The ecological context of student achievement: School building quality effects are exacerbated by high levels of student mobility

National reports along with numerous statewide studies indicate that the physical infrastructure of American schools is crumbling. At the same time there is emerging evidence that school building quality matters for children's academic achievement. We integrate two separate literatures that have demonstrated that low school building quality as well as high rates of student mobility each contribute to reduced academic achievement by showing that these two variables statistically interact. Elementary school children in 511 New York City public schools have lower achievement scores if they attend schools of poor structural quality and with high rates of student mobility. The significant main and interactive effects of school building quality and student mobility on standardized test scores occur independently of socioeconomic and racial composition of the school.     

Falcon离心分选机回收废弃电路板金属的灰色模型研究

电子废弃物的资源化既能实现资源的二次利用,又能防止环境污染,具有重要的理论意义和应用价值。论述了Falcon离心分选机分选电路板的机制,并对小于0.5mm废弃电路板中金属富集体进行了分选试验。运用GM(0,N)模型对离心复合力场中回收废弃电路板建立了分选灰色模型,与实际分选结果比较表明,该模型精度很高。该模型可以对离心复合力场中回收废弃电路板金属的分选试验结果进行预测。     

Characteristics of chlorofluorocarbons (CFCs) emitted from a municipal waste treatment facility

The emission concentrations of several chlorofluorocarbons (CFCs) were measured from a municipal waste treatment facility (located in Seoul, Republic of Korea) to investigate the emission characteristics of CFCs in the urban environment. To this end, a total of five CFCs (CFC-10, CFC-11, CFC-20, CFC-30, and CFC-113) were analyzed by the thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) method. The results of this study indicate that the formation of CFC-11 (8.21 ± 1.68 ppb in spring) and CFC-20 (3.92 ± 3.93 ppb in spring) proceeded very actively within the facility. Moreover, CFC-113 was also found in relatively high concentrations (3.34 ± 1.31 ppb in spring) in the treatment facility. Unlike other CFCs, CFC-10 was observed mainly at ambient (and reference) locations and one point inside the treatment facility. In conclusion, emissions of some important CFCs are a prominent process, as they were measured either frequently or abundantly both in winter and spring. It is further indicated that certain CFCs (like CFC-11 and CFC-30) are subject to highly significant seasonal variations.     

水解-BCMBBR-混凝沉淀组合工艺处理低浓度污水的中试研究

采用水解-生物陶粒移动床(BCMBBR)-混凝沉淀组合工艺处理南方低浓度、低碳高氨氮生活污水(COD 110～140 mg/L、C/N 4～5),开展中试研究。结果表明,BCMBBR 20 d成功挂膜,快速启动;在水温25～29℃,HRT 8 h,气水比5∶1,混合液回流比150%,无混凝沉淀下运行,COD、SS和NH4+-N的平均去除率均在81%以上,TN平均去除率大于47%,而TP去除率较低;后接PAC+PAM强化混凝沉淀后运行,有效提高了TP去除率,出水TP在0.5 mg/L以下,稳定达到(GB18918-2002)一级A标准。曝气强度不同相应BCMBBR中的微生物相(微生物种类和数量)也不同,可根据微生物相来指导曝气强度的调节,实现BCMBBR的高效运行。该组合工艺处理废水运行的直接成本为0.24元/m3,是一种适合南方低浓度、低碳高氨氮生活污水的经济高效处理工艺。