循环流化床锅炉脱硫的影响因素分析

较为系统的分析了影响循环流化床锅炉脱硫的各因素,其中包括运行床温、Ca与S物质的量、床料粒度、流化速度、以及SO_2在炉膛停留时间等,提出在不同运行条件下利用拟合曲线找出最佳脱硫工况。     

环境政策作用机制的分析框架

了解环境政策作用机制是环境政策有效调控的前提和核心,准确理解环境政策作用的背景、成因、过程、作用机制、效应动态、演变规律等;全面而深刻地环境政策副作用和变形的生成-演变规律,了解政策副作用形成机制、传导机制、积累发展机制、作用机制、研究政策变形对环境政策适应性和效率的影响才可能准确预测环境政策所引发的变化,这些变化对社会经济的影响,进而对环境政策的反馈影响和反馈作用,才可能准确有效地设计开发政策工具和调控机制,有铲地进行环境政策调控,提高环境政策的预见性、准确性、操作性和适应性。     

上保护层开采瓦斯综合治理的试验研究

借助于一般的保护层开采理论,对上保护层开采合理参数和保护范围进行了综合分析研究,结合潘东公司具体情况设计了试验方案,现场试验结果表明了该方案的合理性,同时也表明上保护层开采对下临近突出煤层的突出危险消除效果明显,上保护层开采带来的经济和社会效益十分显著。试验结果对类似开采条件的矿井防治煤与瓦斯突出及瓦斯综合治理具有一定指导意义。     

Experimental study on the synergistic inhibition effect of nitrogen and ultrafine water mist on gas explosion in a vented duct

In this study, in order to research the synergistic inhibition effect of nitrogen and ultrafine water mist on gas explosion in a vented duct, a semi-confined transparent chamber was designed with the size of 120 × 120 × 840 mm, and the experiments were carried out with stoichiometric methane/air premixed mixture (fraction of methane: 9.5%), adding different fractions of nitrogen and ultrafine water mist. The experimental results showed the following: The combination of nitrogen and ultrafine water mist had a synergistic inhibiting effect on methane/air explosion, which was preferable to the single use of any kind. With the increase of spraying time of water mist and fraction of nitrogen, the initial shape of the explosion flame became snakelike, and at the same time the peak flame propagation speed and peak overpressure decreased significantly. When the nitrogen fraction was increased to 10% and the mist spraying time was increased to 2min, synergistic inhibiting effect on overpressure was high efficient. However, with the increase of spraying time of water mist and fraction of nitrogen going on, the amount of increase of explosion inhibition efficiency was gradually reduced.     

高压输电系统对通信局(站)危险影响中地电流系数的确定

高压输电系统发生接地短路故障时,会产生一个地电位升,对通信局(站)会危险影响,为了计算这个危险影响的大小,首先能够准确的计算出高压输电系统的地电流系数。本文论述了高压输电系统对通信局(站)危险影响中地电流系数的确定,介绍了地电流系数的定义,并分析了不同危险情况下地电流系数的计算。     

Bacterial toxicity testing and antibacterial activity of parabens

Parabens are used because of their antimicrobial effects, yet they have multiple adverse effects. The aim of this work was to evaluate the bactericidal activity and bacterial toxicity of the most common parabens: methylparaben, ethylparaben, propylparaben, isopropylparaben, butylparaben, isobutylparaben and phenylparaben. The bactericidal action was evaluated by means of the dilution-neutralization method against Escherichia coli and Staphylococcus aureus, and the biotest of inhibition of growth of E. coli was applied for the bacterial toxicity assay. Bactericidal concentrations were reached only for propylparaben, butylparaben and isobutylparaben. The toxicity study showed methylparaben to be the least toxic, whereas the most toxic one was phenylparaben. It can be concluded that the disinfectant activity of the parabens studied is insignificant against S. aureus and E. coli. Acute toxicity is very low, and the inhibitory effect is weak. Our results provide information about the risk–benefit balance of parabens use.     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

Water saving effect on integrated water resource management

This study proposes an improved integrated water resource management (IWRM), in which water conservation was analyzed for the entire water use process. A multi-objective optimization method was applied to optimize the IWRM, which investigated the reduction of freshwater consumption and the total water supply cost. Customer's preference for saving water and an end use analysis (EUA) was applied in the water conservation analysis. Taking Tianjin as the study area, a reduction in customer's economic pressure (EP) was utilized to evaluate the degree of the customer's preference for saving water. The results revealed that agriculture had a greater preference for saving water than other sectors, where as the public had the weakest motivation for saving water. Improving the transportation method could contribute 62.1% of the total water savings in the agriculture sector. The optimization of the IWRM demonstrated that the local freshwater savings would be 21.5%, and the total cost for water supplies would decrease by 13%. However, a government subsidy of 87.5 million Yuan would be needed. Additionally, by analyzing the change in the amount of water savings affected by water price, the appropriate water price increase range was suggested to be 1.5–1.7 times the original price.     

蠡河底泥中反硝化复合菌群富集及菌群结构研究

从无锡市滨湖区蠡河底泥中富集培养反硝化复合菌群,研究其在不同富集培养阶段TN、NO-3-N、NO-2-N、NH+4-N和COD动态变化,分析反硝化过程中气体释放总量、释放速率和成分,通过构建全长16S r DNA克隆文库研究其菌落结构.结果表明,反硝化复合菌群富集在阶段4时脱氮效果最佳,仅在9 h内,330 mg·L-1的TN负荷下,TN去除率达90.9%,NO-3-N去除率达100%,中间产物NO-2-N和NH+4-N积累量最少,分别为3.39 mg·L-1和16.64 mg·L-1,COD去除率达85%;释放气体260m L,气体主要成分为N2,同时还有少量的CH4和CO2等.富集培养反硝化复合菌群细菌属于Pseudomonadaceae科和Rhodocyclaceae科,为Proteobacteria门,OUT丰度分别为57.8%和31.6%,Pseudomonadaceae科是优势类群.     

活性污泥中硝化螺菌(Nitrospira)的富集及其动力学参数

采用连续进水的进水方式对污水处理厂活性污泥系统中的Nitrospira富集培养并对其相关动力学参数进行研究.结果表明,在控制反应器亚硝酸盐浓度不高于2 mg·L~(-1)的条件下可以成功富集出以Nitrospira为优势种属的活性污泥,其最大比亚硝酸盐氧化速率(以N/VSS计)为48.72 mg·(g·h)~(-1).荧光原位杂交结果显示Nitrospira占活性污泥总微生物量的75%左右,而Nitrobacter仅占总微生物的0.1%.此外通过对Nitrospira在20℃时的动力学参数进行测定,结果表明Nitrospira的最适生长温度为30~35℃,温度修正系数τN为1.046,其基质半饱和常数KS和氧半饱和常数KO分别为(0.32±0.03)mg·L~(-1)和(1.52±0.09)mg·L~(-1).Nitrospira动力学参数的研究为污水处理厂的设计运行及工艺优化提供理论参考.