地方环境约束目标对经济增长的影响效应

从2003~2017年中国283个地级市的政府工作报告中,收集了各年度各城市的环境保护约束目标,考察了各类环境约束目标对经济增长的影响.研究发现,对于SO₂等工业污染物的直接约束能够在促使政府提升环境治理力度的同时,释放经济增长红利;关于空气质量优良天数和PM_2.5浓度的间接约束不足以刺激污染型企业转型,且导致经济增长速度放缓.无环境约束将产生正向经济增长效应,但会以环境污染为代价.中间机制检验结果显示,产业结构和环境治理是环境约束影响经济增长的主要传导渠道.在环境保护约束的特征方面,约束目标“加码”将抑制经济增长,设定污染物减排区间更有利于发挥经济增长效应.经济与环境协调度方面,对环境污染物设定约束目标有助于促进经济与环境协调发展,无约束则不利于经济增长和环境保护双重目标的实现.地方政府应在明确设定污染物排放目标的基础上,遵循渐进原则对环境保护约束目标进行调整.     

北山地区大气降水中水化学及稳定同位素特征

为揭示甘肃北山地区大气降水的水化学及同位素特征,利用2012~2019年度采集的97件大气降水样品,采用相关性分析,富集因子,气团后向轨迹分析等多种方法对北山地区稳定同位素变化特征及其影响因素,降水中主要离子变化特征,不同离子来源及贡献,水汽来源进行了分析.结果表明,北山地区区域降水线的斜率与截距均高于张掖地区大气降水线;该区降水中稳定同位素比率明显受季节性,温度和高程效应的影响,在年尺度下,降雨量效应不明显;该区降水中氘盈余变化较大,雨季降水中氘盈余显著小于旱季降水中氘盈余值;北山地区大气降水的水化学型主要为HCO₃·SO₄-Ca和HCO₃-Ca型,降水中离子浓度具有明显的季节性变化,降雨量的增加对离子浓度具有一定的稀释作用;Na⁺受海源和陆源物质的双重影响;绝大部分的Ca²⁺,K⁺,HCO₃^-和部分Mg²⁺来源于陆源,SO₄^2-与NO₃^-的主要来自于人类活动输入;区内冬夏季水汽来源基本一致,来源于西北方向的季风源是北山地区最主要的水汽来源.研究成果可为我国高放废物地质处置库选址和性能评价以及未来地下处置库建设提供依据,也有助于丰富西北干旱区的水文循环过程研究.     

专家笔谈：资源环境热点问题

重大的资源开发利用工程建设设想或实施往往容易引起社会各界的广泛关注。如何正确认识和科学评价各种资源环境热点问题是大家讨论的重点。文章认为任何重大资源开发工程必须遵循自然规律、生态规律、资源规律和经济规律,必须结合国家战略需求和地缘政治关系,开展前期深入的系统性综合调查,进行生态安全与资源工程安全评价和交叉学科论证,并对其科学价值、社会价值和经济价值等做出正确的判断。建议：未来的资源环境工程建设要谨防“大跃进”,要科学认识自然资源系统规律,守护好美丽的地球家园;要切实履行资源科学家的社会责任,提倡基于科学研究和科学态度的学术争鸣,科学问题最好还是由科学家去讨论;一些争议大的科研课题慎用公益性研发经费来支持。     

大型空间环境模拟器真空系统配置技术研究

分别对国内外大型空间环境模拟器的真空系统配置进行了介绍,并对真空系统各个子系统的配置与技术特点进行了分析,重点针对大型空间环境模拟器真空系统中所需的真空抽气策略进行了研究,为后续超大型环境试验设备的研制和试验测试提供了参考。     

提升汇流环湿热环境适应性方法研究

目的提高汇流环在湿热环境下的适应能力。方法实物解剖,观察汇流环绝缘材料损坏情况、碳粉堆积情况,在不同温度、湿度下测试绝缘材料绝缘度、抗电强度,碳粉堆积和导电情况,比对不同绝缘材料性能,并找出最适合的绝缘材料,比对滚动汇流环、碳刷组件、刷丝组件,找到解决碳粉堆积的方法。结果汇流环受湿热影响会从接缝处和电缆连接处进入湿气,温度、湿度的上升会使得原绝缘材料性能下降,长时间使用汇流环,碳粉会在汇流环内堆积并受到湿热的影响而导电,局部密封汇流环可以减少湿气进入。PPO材料性能优异,可以替换原绝缘材料从而减少湿热的影响,使用刷丝组件替代碳刷可以避免碳粉的产生。结论综合运用局部密封、绝缘材料改进、碳刷组件改进三种措施,可以有效提高汇流环在湿热环境下的适应能力。     

一种模拟动力学边界条件的环境振动试验方法研究

目的提高环境振动试验的可靠性。方法以某典型钛合金蜂窝夹芯壁板试验件为例,提出一种模拟试验件动力学边界条件的试验方法,在试验件周围引入弹性连接件,再通过刚性转接工装与振动台台面连接,以试验件在试验安装状态下的共振频率及振型节线位置为优化目标,以弹性连接件的外形尺寸及厚度为优化变量,对弹性连接件进行优化设计,从而模拟试验件真实的动力学边界条件。结果弹性连接件的优化设计使得试验件在试验安装状态下前两阶共振频率与试验要求相差小于8%,而且振型节线位置与试验要求基本重合,达到了模拟试验件真实动力学边界条件的设计目标。结论对于壁板类试验件,在传统刚性夹具的基础上引入弹性连接件的试验方法,可以较好地模拟试验件真实动力学边界条件,提高环境振动试验的可靠性,并且这种方法对试验费用及试验周期影响较小,具有良好的工程应用前景。     

环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

Analysis of pollutant levels in central Hong Kong applying neural network method with particle swarm optimization

Air pollution has emerged as an imminent issue in modernsociety. Prediction of pollutant levels is an importantresearch topic in atmospheric environment today. For fulfillingsuch prediction, the use of neural network (NN), and inparticular the multi-layer perceptrons, has presented to be acost-effective technique superior to traditional statisticalmethods. But their training, usually with back-propagation (BP)algorithm or other gradient algorithms, is often with certaindrawbacks, such as: 1) very slow convergence, and 2) easilygetting stuck in a local minimum. In this paper, a newlydeveloped method, particle swarm optimization (PSO) model, isadopted to train perceptrons, to predict pollutant levels, andas a result, a PSO-based neural network approach is presented. The approach is demonstrated to be feasible and effective bypredicting some real air-quality problems.     

The Chemistry of Soils, Rocks and Plant Bioindicators in Three Ecosystems of the Holy Cross Mountains, Poland

In June of 2000, biogeochemical study was carried out in three ecosystems of the Holy Cross Mountains (south-central Poland). This paper presents element concentrations and stable sulfur (and in one site lead) isotope ratios in rocks, detailed soil profiles, and plant bioindicators including epiphytic lichen Hypogymnia physodes (L.) Nyl., mosses (Pleurozium schreberi (Brid.) Mitt., Hypnum cupressiforme Hedw. S. Str., Hylocomium splendens (Hedw.) B.S.G.), Scots pine (Pinus sylvestris L.), common birch (Betula pendula Roth.), aspen (Populus tremula L.) and English oak (Quercus robur L.). Chemical analyses were performed with ICP-AES and AAS methods in the accredited laboratory (Central Chemical Laboratory of the Polish Geological Institute in Warsaw). The principal objective of this study was to compare the chemical composition of rocks, soils and selected plant bioindicators between investigation sites using the same methods of sample collection, preparation and analyses. The results of this study have shown that there is a high variability in concentrations of elements in plant bioindicators from the same sites that can not be explained only by soil properties or anthropogenic influence. This conclusion indicates that for biomonitoring purposes (especially with vascular plants) we cannot neglect individual features of the species examined.     

Study on the effect of porous fence on air quality and traffic noise level around a double-decked road structure

Fence for traffic noise control sometimes causes adverse effect on air pollution. Thus in this study, performance of porous fence as a tool for control of both air pollution and noise pollution was evaluated. A two-dimensional numerical model for flow and pollutant concentration and an analytical model for traffic noise were utilized in the analysis of a double-decked road structure with fences only at ground (Case 1) and at both ground and upper deck (Case 2). Porous fences were assumed only at the ground level since the solid fences at the upper deck usually leads to desirable result on air pollution. Effects of the variable porosity on air quality and noise level near road were evaluated. Obtained results showed: (1) flow pattern in leeward of fence was drastically changed at 40–50% porosity in Case 1 and 50% in Case 2. The porosity larger than 40% excluded presence of a circulation behind the fence. (2) Effect of porous fence on air pollution was different in Cases 1 and 2. In Case 1, the porous fence generally resulted in the reduction of air pollution at the ground level; on the other hand, in Case 2, it rather led to increase of the concentration. (3) Traffic noise level was also largely changed by the porosity of the fence; an example of simultaneous evaluation of the effects of porous fence on both air and noise pollution in Case 1 showed that the fence of 60% porosity leads to reduction of air pollution by 20% compared with solid fence case, and reduction of noise pollution by 4–6% in dB compared with no fence case, at l m high and 10 m from the road.