水热法制备N掺杂纳米TiO2及其光催化活性研究

以钛酸四丁酯和氨水为前驱物,采用水热法制备N掺杂TiO2纳米微粒,利用X射线衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)等技术对不同条件下制备的产物进行了表征.探讨了不同体积比的前驱物、水热温度、水热时间及煅烧温度对水热产物的影响;考察了N掺杂催化剂在紫外线和可见光下光催化降解甲基橙和苯酚的催化性能.     

膜表面形貌对厌氧膜生物反应器膜污染影响的试验研究

在厌氧膜生物反应器处理高浓度食品废水的试验中,借助原子力显微镜分析了四种表面形貌不同的聚醚砜超滤膜的通量衰减规律.结果表明,超滤膜表面形貌愈粗糙,膜通量的衰减速率愈快,且化学清洗后恢复愈困难.     

复合污染状态下尾矿区有害化学品的迁移研究

用混合尾矿浆及尾矿渣淋溶柱,研究选矿药剂在尾矿渣及尾矿废水中的静态分布及其淋溶作用,结果表明:①选矿药剂对整个尾矿区都污染,即使是水溶性好的药剂,它们在尾矿渣中的静态分布也占有相当的比例,油溶性好的药剂多存在于尾矿渣中,尾矿污染为多种药剂的复合污染,各种药剂在尾矿渣及尾矿废水中的总浓度成倍加大;②用尾矿渣淋溶柱测得单一药剂的淋溶值:25号黑药>MIBC> CN->二号油>乙基黄药>丁基黄药>Y-89黄药.但多种药剂复合污染时,药剂的淋溶距离明显加大,其中CN-和Y-89黄药加大近一倍.复合药剂污染加大药剂的残留期,也加大它们向地下水及其它水源迁移的几率.     

偏电压对Ti/TiO2光电催化氧化富里酸的影响

采用光电催化反应器对水中天然有机物富里酸(FA)进行降解试验,考察了外加阳极偏电压对光电催化反应器降解富里酸的影响.结果表明,当外加电压为1.2V时,具有最佳的UV254和有机碳TOC去除率,当反应时间为2h时,富里酸的UV254和总有机碳TOC的去除率分别为77.4%和45.4%.另外,在反应初期(前1h内)富里酸光电催化反应动力学常数主要受外加偏电压的影响.     

手性污染物与环境安全

本文就手性污染物在生命过程中对映体的差异作了简要评述,分析了手性污染物对映体的毒性差异及机理.同时指出了手性污染物今后研究的发展趋势.     

活性碳纤维在环境保护中的应用

由于活性碳纤维的吸附面积大,可以作为固相微萃取的纤维用于对环境污染物质的分析检测,包括含硫和含氯的一些有机化合物.同时,活性碳纤维具有良好的导电性能,可以作为电极,能有效地去除环境中城市污水、燃料废水和腐植酸的污染.     

图象法确定底泥颗粒物的表面分形维数(Ds)

研究了不同标度下底泥颗粒物的表面分形特征.结果表明,底泥颗粒的表面在几个nm到几个μm之间一般都具有多重分形特征,而且在不同的标度范围内表面分形维数(Ds)具有一定的差异,在100-102量级之间,随图象分辨率的增大,相应的Ds一般呈变小的趋势.SEM图象计算出的Ds为2.32-2.42,AFM图象计算出的Ds为2.00-2.46,它们是是纯粹几何意义上的表面粗糙特征的描述.     

Creation of the natural reserve of La Crau: implications for the creation and management of protected areas

Grasslands were once widespread and species-rich ecosystems. They have drastically decreased throughout the world, largely due to changes in land-uses. Remnant grasslands are often highly degraded and disconnected and require active conservation. In order for grasslands to be maintained worldwide, protected areas need to be created. While adequately creating and managing protected areas has proven difficult, this can be improved by following a three-point guideline: (1) consider many ecological groups (birds, insects, plants); (2) use conservation biology knowledge; (3) seek agreements with concerned parties by comprehending elements of economy, politics and sociology. Based on the example of La Crau, a steppe area in South-eastern France, this review aims at (i) illustrating that this guideline can facilitate creating and managing protected areas and (ii) proposing improvement to the guideline while keeping it simple. In La Crau, the need for conservation was first acknowledged in 1975. Between 1983, when a request for a protection decree was made and 1990, when the first concrete protection measure was taken, 20% of the steppe disappeared. It took another 8 years to reach a concerted management plan in 1998. The review shows how using ecological guidelines would have helped better and faster protection of the steppe. Improvements to the guideline drawn from the La Crau experience include: the protection of some traditional practices; the protection of some degraded habitats that can substitute for habitats that no longer exist; the restoration of degraded habitats that do not qualify for protection; and the flexibility of the management plan.     

Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

离心场环境下液压振动台试验设备的研制

本文主要介绍了离心机液压振动台系统的设计思想、构成和工作原理以及主要技术指标、特点和意义.