我市污水处理自动化控制系统展望——基于PLC控制与触摸屏的应用

介绍了由PLC和触摸屏组成的控制系统的特点和功能,以及PLC和上位机构成的控制系统可实现污水处理整个过程的实时监测和控制。     

耐冷菌在低温下处理污水的研究进展

低温污水的生物处理一直是水处理领域的难点和热点,由于耐冷菌对温度的适应范围较宽,且在低温下仍然保持较高的代谢活性,因此在污水处理和污染环境生物修复领域中的应用逐渐受到重视。本文介绍了耐冷菌在环境中的分布、主要种类以及适冷机理,概述了耐冷菌在工业废水和生活污水处理中的主要研究进展。指出应进一步开发环境中耐冷菌菌种资源,揭示耐冷菌的冷适应特性和功能表达之间的关系,加强耐冷菌在水体修复与净化领域的理论和应用研究,从而为我国北方尤其是东北地区的水环境保护提供行之有效的新途径。     

一次环境污染司法鉴定的测试与分析

受人民法院的委托,环境监测部门对一起汽车尾气致人死亡案件的现场进行大气污染物和空气质量的模拟测试。测试表明,在密闭的车库内,汽车外和汽车内CO浓度都会迅速增加,达到致人死亡的浓度,O2浓度迅速减少,最终使汽车发动机熄火。测试为司法部门提供案件审理现场空气质量数据,也提醒人们不要在密闭的车库内开启汽车空调取暖或纳凉休息。     

城市环境保护中污水治理的相关问题研究

随着我国向工业型国家转型的进程加快,我国作为一个水资源贫乏的国家,水污染的问题日益突出。因此,对于我国城市污水处理问题进行研究探讨,对于实现我国可持续发展战略有着重大的意义。本文主要对目前我国城市污水处理中存在的问题进行了分析研究,并在此基础上,对我国的城市污水处理提出了一些有针对性地对策与措施。     

电动交通工具的污染减排及对策

燃油交通工具是城市温室气体的重要来源之一,因此使用电动交通工具成为解决城市污染减排的重要措施.文章就正确认识电动交通工具污染减排的作用,蓄电池的生产管理、回收利用等进行了讨论,并提出了相应的对策和建议.     

PU合成革废水治理分析

生产聚氨酯（PU）合成革的废水中含有高浓度有机物,其中N,N-二甲基甲酰胺（DMF）毒性大,难生物降解.文章阐述了合成革的生产工艺,分析该过程中DMF废水形成阶段、处理现状及其处理方法.结合各种方法的优缺点,展望了DMF废水的处理研究方向.     

含油废水处理技术

概述了含油废水的来源、特点、分类及危害,介绍了含油废水的处理方法的原理、优势及存在的问题,同时简述了各种处理方法的最新研究成果,最后提出了含油废水发展趋势。     

2-丁烯醛生产废水中溶解性有机物的分级解析

采用超滤膜法将2-丁烯醛生产废水中的有机物分为相对分子质量不同的7个级分,并应用溶解性有机碳(dissolved organic carbon,DOC)、紫外吸收光谱(ultraviolet spectrum,UV)、傅里叶变换红外光谱(fourier transform infrared spectrometer,FT-IR)和气相色谱/质谱联用仪(gas chromatography with mass spectrometry,GC-MS)技术对不同相对分子质量区间的有机物所占比例及物质结构进行了研究.结果表明,废水中相对分子质量1×103的有机物所占比例最高,达到88.57%;采用GCMS对废水中相对分子质量1×103的级分进行分析,定性出27种化合物,包含醛、酮、酯、醇、酚、酸、烷烃类及其他苯系物等,其峰面积占有机物峰面积总和的比例分别为6.9%、5.3%、35.4%、13.2%、4.6%、0.4%、1.7%、16.8%,总和为84%.UV和FT-IR分析结果均显示不同相对分子质量区间的光谱吸收特征没有明显差别,级分中存在含有不饱和双键、羟基、羰基化合物及芳香族化合物,与GC-MS检测结果相吻合.研究结果为废水处理工艺的开发与优化提供了重要的指导作用.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.