采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

高铁酸盐处理有机废水的研究进展

综述了高铁酸盐去除水中藻类、细菌、烃类衍生物、药品、农药、染料等有机污染物的国内外最新研究进展,并对高铁酸盐的高效利用进行了探讨。高铁酸盐可破坏藻类和细菌细胞的完整性,将大分子芳香烃衍生物氧化为低毒的小分子中间体,将小分子链烃衍生物矿化,破坏药品、农药及染料的不饱和双键。无机矿物在溶液中负载高铁酸盐或将高分子有机物与固体高铁酸盐混合造粒,将是高铁酸盐高效利用领域的研究热点。     

海上含聚污水电化学处理装置的优化

为解决传统电化学方法在含聚污水处理时电极板消耗严重、絮渣量大的问题,通过改进电极板材料、组合数及结构等,研究适度降解-除油一体化电化学技术,在降低渣泥量的同时保证处理效果。实验结果表明:最佳电极板组合为"网状惰性金属复合物极板(阳)-网状铝极板(阴)-网状铝极板(阴)-网状惰性金属复合物极板(阳)";在电解电流为4.0 A、极板间距为8.0 cm、面体比(电极板面积与处理污水量的比值)为2/17 cm~2/mL、电解时间为30 min的最佳处理条件下,几乎无絮渣产出,含聚污水的浊度去除率为93.3%、聚合物降解率为92.0%、除油率为95.0%,展现了优良的处理效果。     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

Hydraulic fracturing as an interpretive policy problem: lessons on energy controversies in Europe and the U.S.A.

This special issue addresses hydraulic fracturing for shale gas extraction as an interpretive policy problem. Bringing together empirical cases from the U.S.A., the Netherlands, the U.K., Poland, and Germany, we identify three approaches to the interpretation of hydraulic fracturing in the article: understanding its meaning, contextual explanation of the institutionalization of its meaning, and policy design as intervention to alter its meaning. By exploring differences and similarities across these cases, we identified two central tensions in the meaning of shale gas in all cases: (1) economic opportunity or environmental threat and (2) transition toward a more carbon-free energy future or perpetuation of a fossil fuel system. We found that when actors shift the meaning of hydraulic fracturing to consider it predominantly an issue of threat, this explains the dominance of risk governance as an approach to managing the controversy. Alternately, when the meaning of fracking shifts from consideration as an economic opportunity or a bridge fuel to consideration of it as a barrier to an energy transition, this explains the decision to ban fracking. Therefore, a comparative assessment of the papers demonstrates the ways interpretive dimensions of politics can influence the governance of public policy.     

工业烟气氨法-络合法同时脱硫脱硝

在脱硫脱硝喷淋装置上采用氨法-络合法处理工业烟气。考察了吸收液pH、Fe(Ⅱ)EDTA浓度、初始烟气浓度、液气比对烟气同时脱硫脱硝效果的影响。实验结果表明:吸收液的酸碱度通过影响Fe(Ⅱ)与EDTA的络合形式进而影响NO去除率;SO_2去除率主要受吸收液pH和初始SO_2质量浓度的影响;当吸收液pH大于8、吸收液Fe(Ⅱ)EDTA浓度大于0.100 mol/L、初始SO_2质量浓度小于1 500 mg/m3、初始NO质量浓度为1 200 mg/m3时,SO_2去除率均在95%以上,NO去除率为54%;当液气比由1 L/m3增大至4 L/m3时,有效脱硫时间和有效脱硝时间分别增长了7 min和4 min。     

Fate of pharmaceuticals and personal care products in wastewater treatment plants - Conception of a database and first results

We created a database in order to quantitatively assess the occurrence and removal efficiency of pharmaceuticals and personal care products (PPCPs) in wastewater treatment plants (WWTPs). From 117 scientific publications, we compiled 6641 data covering 184 PPCPs. Data included the concentrations of PPCPs in WWTP influents and effluents, their removal efficiency and their loads to the aquatic environment. The first outputs of our database allowed to identify the most investigated PPCPs in WWTPs and the most persistent ones, and to obtain reliable and quantitative values on their concentrations, frequency of detection and removal efficiency in WWTPs. We were also able to compare various processes and pointed out activated sludge with nitrogen treatment and membrane bioreactor as the most efficient ones.     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

用H2O2/Fe^3＋处理高浓度含甲醛废水的研究

研究采用H2O2/Fe^3＋催化氧化处理高浓度含甲醛废水,探讨了双氧水和催化剂投加量、反应pH及反应温度等操作条件对处理效果的影响,并通过酸溶解回用失活催化剂。结果表明,较优的操作条件为：H2O2/COD（质量比）=2.2～2.6,Fe^3＋/H2O2（摩尔比）=0.048～0.058,反应pH1.80～2.68,反应温度50℃,反应时间40 min;在上述操作条件下,甲醛去除率达到99%以上,COD去除率达到85%以上。失活的催化剂可通过稀酸溶解后循环使用,其效果与三价铁盐作催化剂的基本相同。采用H2O2/Fe^3＋处理含甲醛废水具有比采用H2O2/Fe^2＋较优的效果。     

降低FCC再生烟气NOx排放助剂的实验室评价

通过采用ACE装置与烟气NOx分析仪器联用的实验室评价方法,可在更接近实际催化裂化反应-再生过程的条件下,评价助剂对再生烟气中NOx的催化转化性能,同时还可考察助剂的加入对催化裂化产品分布的影响。采用该方法对几种降NOx助剂的性能进行了评价,结果表明,在催化剂体系中含有Pt基CO助燃剂的情况下,加入4％的RDNO;助剂后,烟气NOx降低幅度约30％～40％,且催化裂化产品分布基本不受影响。