三维电极电催化氧化法处理废水的研究进展

综述了近几年国内外在三维电极电化学反应器方面的最新研究进展,分析了电源的输出形式、阴阳极板的布置方式、粒子电极的填充方式等因素对废水处理效果的影响,探讨了碳纳米材料等新材料在粒子电极载体上的应用,最后介绍了三维电极法与其他技术联用的最新研究,并指出了三维电极法存在的问题及今后的研究方向。     

The correlation of total and extractable heavy metals from soil and domestic sewage sludge and their transfer to maize ( Zea mays L.) plants

A study to understand the mobility and transport of heavy metals (HMs) from soil and soil amended with sewage sludge to maize plants was carried out. The total and ethylenediaminetetraaceticacid (EDTA)-extractable HMs in agricultural soil and untreated domestic sewage sludge samples, and the correlation between the total and extractable metals in soil and sewage sludge were carried out. Pot experiments were performed to study the transfer of HMs to maize grains, grown in soil (control) and in soil amended with sewage sludge (test samples). The total and extractable HMs in soil, sewage sludge, and maize grains were analysed by FAAS/ETAAS (flame atomic absorption spectrometer/electrothermal atomic absorption spectrometer) after digestion in microwave oven. Statistically significant correlations were obtained between the total contents of Cu, Cd, As and their respective extractable fractions in soil, while in domestic wastewater sludge (DWS) the better correlation was observed only for Ni and Cd. The edible part of maize plants (grains) from test samples presented high concentration of Zn, Pb, Ni, Cd, Cu, As, and Cr concentrations (80.7–85.6, 3.8–3.95, 2.35–2.5, 0.75–0.82, 3.21–3.29, 0.23–0.27, and 0.22–0.29?mg?kg^?1, respectively). Good correlations were found between metals in exchangeable fractions of both soil and DWS and total metals in control and test samples of maize grains. The transfer factor of all HMs from DWS to maize grains was also determined.     

Granulation of gibbsite with inorganic binder and its ability to adsorb Mo(VI) from aqueous solution

In this study, we prepared a new adsorbent and evaluated its ability to adsorb Mo(VI). Gibbsite was granulated with colloidal alumina or colloidal silica. The amount of Mo(VI) adsorbed onto granular gibbsite with a binder, effect of contact time and pH on the adsorption of Mo(VI), and column experiments were investigated. The amount of Mo(VI) adsorbed was greater in the order of ST12 (colloidal silica, 12%)?相似文献   

印染污泥焚烧烟气污染控制案例分析

以广东省某两家印染厂的印染污泥焚烧项目为主要研究对象,从污泥处理技术路线、焚烧设备及烟气处理流程等各方面入手,对各厂印染污泥与煤混烧烟气中颗粒物、NOx、SO2、酸性气体(HF、HCl)和重金属等污染物的进行采样分析,并对各厂现有烟气污染物控制设施的运行效果进行调研,结果表明,布袋除尘的效果较为理想,除尘效率可达99%以上;使用印染废水作为吸收液的湿法脱硫技术对SO2及酸性气体的去除效果不理想;SNCR对NOx具有一定的去除效果,是一种较为经济、高效的脱硝技术;焚烧后,大部分重金属最终以飞灰的形式被除尘器去除,但仍有部分重金属如Hg在出口烟气中的浓度仍然很高,需要采取必要的措施控制烟气中的重金属. 此外,基于印染污泥焚烧实例分析,提出适于印染污泥与煤混烧烟气处理工艺流程.     

Control of chlorinated aromatic compounds from a municipal solid waste incinerator using limestone addition

In this study, limestone powder was directly added to synthetic MSW, which was fed into a small‐scale fluidized bed incinerator. The concentration of CBzs and CPs in the flue gas were measured before and after a secondary combustion air injection. Finally, the PCDDs and PCDFs concentrations were also measured in the flue gas after the secondary combustion zone. The CaCO₃ added to synthetic MSW not only controls HCl in the flue gas, but suppresses the formation of chlorinated aromatic compounds like CBzs, CPs, PCDDs, and PCDFs. The main mechanisms to control the formation of chlorinated aromatic compounds was more likely related to the suppression of catalytic capability of flyash than the HCl reduction in the flue gas. However, the NO concentration was increased by catalytic reaction of limestone in the fluidized bed.     

低DO微孔曝气变速氧化沟脱氮能力恢复效果分析

活性污泥法低温运行中的污泥膨胀主要是由丝状菌引起,微丝菌(M.Parvicella)则是污泥膨胀中的优势丝状菌.针对微孔曝气变速氧化沟中试系统中因低温引起的污泥严重膨胀及其污泥硝化能力降低的问题,采取增大曝气量快速培养污泥硝化菌含量,再逐渐增加A:O比为0,0.1,0.5,1.1,1.8提高反硝化能力,从而恢复污泥脱氮能力.在恢复期间,污泥絮体中的疏水性M.Parvicella附着于反硝化产生气体上,在选择池和氧化沟表面形成浮泥,对其进行去除,以减少絮体中丝状菌含量,提高硝化菌含量及其硝化能力.同时对不同微丝菌含量的污泥絮体(沟内混合液和表面浮泥)的硝化和反硝化速率进行测定,结果表明微丝菌含量高的活性污泥其硝化能力较弱,而快速反硝化能力较强,则对慢速和内源反硝化影响不大.进一步证明M.Parvicella也是除了DO浓度,水温和负荷之外影响活性污泥硝化能力和污泥沉降性能的重要因素之一.     

锅炉废气流化床污泥干化塔的热力计算与分析

利用锅炉尾部废烟气(120～190℃)干化市政污泥,降低污泥含水率可达到后继合理利用。从三方面对污泥干化进行了分析:1)干燥后污泥含水率与污泥处理量关系;2)入口烟温、流量与污泥处理量关系;3)干燥后烟气相对湿度影响因素分析。结果表明:提高入口烟温、流量,污泥出口含水率都可以提高污泥处理量,高入口烟温、流量下,污泥处理量受含水率的影响更大;污泥出口含水率高时,入口烟温提高使污泥处理量提高增大显著;入口烟气流量愈高,入口烟温提高对污泥处理量的增加愈大。干燥后烟气相对湿度与入口烟温有关,干燥之后的烟气的相对湿度离饱和状态较远,此温度范围内的出口烟气湿度还有较大的余量。     

改进型ABR+复合生物反应器处理糕点残渣废水

介绍了改进型ABR+复合生物反应器在糕点残渣废水处理工程实例中的应用,运行结果表明:该工艺运行稳定、操作简便、运行成本低,处理糕点残渣废水可获得良好的效果,出水水质达GB 8978—1996《污水综合排放标准》中的一级排放标准。     

液氮冻融破碎生物污泥制备生物絮凝剂

利用城市剩余生物污泥,采用液氮冻融破碎、提取液提取的方法制备了生物污泥絮凝剂。对絮凝剂的制备条件及其絮凝性能进行了研究,结果表明:采用液氮冻融破碎,pH为1.0的稀盐酸溶液作为提取液提取所制备的絮凝剂,对高岭土悬浮液的絮凝效率可达98.5%。液氮冻融破碎的次数对絮凝剂制备没有明显影响。同时考察了絮凝剂投加量以及絮凝体系的pH对絮凝剂絮凝活性的影响。     

g 辐照预处理促进剩余污泥发酵产氢的研究

为降低能耗,提高辐照技术的经济性,探讨了在0~9.5kGy范围内,γ辐照剂量对生活污水处理厂二沉池剩余污泥中耗氢菌的抑制效果和对发酵产氢的影响,建立了描述发酵产氢过程及辐照影响的动力学模型.结果表明,γ辐照剂量从0增加至9.5kGy时,污泥溶解率从0增加至4%,上清液中可检测出一定的蛋白质和多糖等物质,其中蛋白质中的氮素占溶出总氮素的90%,表明较低剂量辐照即对污泥菌体造成较明显的破解,这可在一定程度上抑制无法形成芽孢的耗氢菌活性;与之相对应的是污泥发酵产氢能力的明显提升,以葡萄糖为底物(1.0g/L),在35℃和初始pH值为7.0时,当辐射剂量仅为0.5kGy时,累积产氢量即比未辐照时有70%的提升,进一步增加辐照剂量至5kGy,累计产氢量和产氢得率均继续增长且达到最大值,分别为240mL/g葡萄糖和1.93mLH2/mol葡萄糖(发酵液的污泥量达2.0g VSS/L);此后,污泥发酵产氢能力随辐射剂量的增加而降低.修正的Logistic模型能很好地描述本研究中累积产氢量随时间的变化规律,而修正的Han-Levenspiel模型能很好地描述辐照剂量对平均产氢速率的影响.