石化企业VOCs无组织排放源强的反演模拟

针对石化行业面源无组织排放VOCs难以准确定量的问题,建立了基于开路式傅里叶变换红外光谱技术(OP-FTIR)的面源污染源源强反演模型,并进行了现场模拟试验。试验结果表明,风向、风速、大气稳定度、监测距离、数据处理周期等都是影响反演模型准确性的重要灵敏度参数。以反演源强Q_P与实际排放量Q的比值(Q_P/Q)为量化指标,对各影响因素进行优化处理,确定了构建反演模型适用的边界条件。当各灵敏度参数稳定于适用边界条件之内时,Q_P/Q为0.85~0.90。     

成渝地区一次区域重污染过程来源解析及减排效果研究

基于嵌套网格空气质量预报模式(NAQPMS)及耦合的污染来源追踪模块模拟2017年12月16日至2018年1月3日成渝地区一次区域重污染过程,定量解析成渝地区主要城市PM2.5来源,评估过程中应急减排的成效。结果表明,天气静稳和风向辐合是造成此次重污染过程的重要因素,污染峰值阶段,成渝地区多个城市PM2.5日均质量浓度超过150μg/m3,达到重度污染级别。污染过程中,成都市PM2.5本地排放的贡献率为42%,眉山和德阳贡献率将近30%;重庆市PM2.5本地排放的贡献率为60%,外来输送以湖北、湖南和其他地区为主,贡献率为24%,成都和重庆市的工业源和交通源的贡献最大。区域联防联控应急减排对成渝各城市空气质量改善效果显著,成渝地区PM2.5浓度降低率为5%~11%,对于未实施应急预警方案的地区(如眉山市)受周边城市减排影响,浓度降低可达6%。     

基于地理探测器的区域植被覆盖度的定量影响——以京津风沙源区为例

植被覆盖度（FVC）是衡量生态环境优秀的重要指标.本文基于MODIS NDVI数据,运用像元二分法模型,估算了2000~2018年京津风沙源区FVC,分析了其时空变化特征.在此基础上,基于地理探测器模型,定量分析了自然因素和人类活动因素等12个因子对京津风沙源区FVC空间分布的影响.结果表明,近20a来京津风沙源区FVC整体上呈增加趋势,增加率为8.2%.空间上,研究区73.7%的区域FVC在增加,其中显著增加的区域主要集中在晋北山地丘陵亚区、燕山丘陵山地水源保护亚区、大兴安岭南部亚区和科尔沁沙地亚区的南部.2000~2018年,降水是影响京津风沙源区FVC空间分布的主要自然因子,解释力为63.3%;年末大牲畜头数是影响FVC空间分布的主要人为因子,解释力为34.8%.自然因素和人类活动之间的双因子交互作用以双协同作用和非线性协同作用为主,表明相对于单因子,自然因素和人类活动间的交互作用对FVC的解释力更强.其中,降水与其他11个因子的交互作用对研究区FVC起主导作用,解释力超过60%.     

基于单颗粒气溶胶质谱技术的源解析新算法

针对现有单颗粒气溶胶质谱技术的颗粒物快速来源解析方法不能提供基于质量浓度单位源解析结果的问题,提出一种新型单颗粒快速源解析算法ArtPMF.选择淮河平原某能源工业城市2021年2～3月的单颗粒质谱监测数据对ArtPMF算法进行应用.结果表明监测期间二次源、工业源、机动车尾气源、燃煤源、扬尘源、生物质燃烧源和烟花燃放源对...     

Isometric Pull and Push Strengths of Paraplegics in the Workspace: 2. Statistical Analysis of Spatial Factors

The effect of reach levels, horizontal angles, and vertical angles on isometric pull and push strengths of male and female was determined. Highly significant increases in men’s push strength were found between extreme to maximum reaches, and from extreme to normal reaches. However, for women’s push strength, a significant increase was found only between extreme to maximum reach. Significant or highly significant increases were found in men’s and women’s pull strength between the horizontal angle (θ) sagittal through the active shoulder (90°) and other angles (0, 45, and 135°). However, for men’s push strength, highly significant increases were found between the horizontal angle 45° from the frontal plane, and other angles. For women’s push strength, significant or highly significant increases were found between the horizontal angles 0° and angles of 90 and 135°. For men’s and women’s pull strength, significant or highly significant increases were found between the vertical angle (?), 90°, and other angles (–20, 0, and 45°). Similar increases were found for women’s push strength between the 45° angle and other angles. In the design of a workstation for paraplegics that requires pull and push forces, consideration must be given to the spatial factors.     

An optimal level of dust explosion risk management: Framework and application

The current research provides guidance on the prevention and mitigation of dust explosion using a Quantitative Risk Management Framework (QRMF). Using concepts drawn from previous studies, the framework consists of three main steps: (i) a new combined safety management protocol, (ii) the use of DESC (Dust Explosion Simulation Code) and FTA (Fault Tree Analysis) to assess explosion consequences and likelihood, respectively, and (iii) application of the hierarchy of controls (inherent, engineered and procedural safety). QRMF assessment of an industrial case study showed that the original process was at high risk. DESC simulations and Probit equations determined the destructive percentages. FTAs revealed high probabilities of explosion occurrence; in addition, detailed individual and societal risks calculations were made, before and after the framework was applied. Based on the hierarchy of controls technique, the framework showed significant risk reduction to the point where the residual risk was acceptable for the process.     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

Performance on a Work-Simulating Firefighter Test Versus Approved Laboratory Tests for Firefighters and Applicants

Aim. Firefighters must meet minimum physical demands. The Norwegian Labour Inspection Authority (NLIA) has approved a standardised treadmill walking test and 3 simple strength tests for smoke divers. The results of the Trondheim test were compared with those of the NLIA tests taking into account possible effects of age, experience level and gender. Methods. Four groups of participants took part in the tests: 19 young experienced firefighters, 24 senior male firefighters and inexperienced applicants, 12 male and 8 female. Results. Oxygen uptake (V_O2) at exhaustion rose linearly by the duration of the treadmill test. Time spent on the Trondheim test was closely related to performance time and peak V_O2 on the treadmill test. Senior experienced firefighters did not perform better than equally fit young applicants. However, female applicants performed poorer on the Trondheim test than on the treadmill test. Performance on the Trondheim test was not closely related to muscle strength beyond a minimum. Conclusion. Firefighters completing the Trondheim test in under 19 min fit the requirements of the NLIA treadmill test. The Trondheim test can be used as an alternative to the NLIA tests for testing aerobic fitness but not for muscular strength. Women’s result of the Trondheim test were poorer than the results of the NLIA treadmill test, probably because of their lower body mass.     

邛海水质变化趋势及保护对策研究

本文通过对邛海流域现状污染源进行调查,邛海流域COD、氨氮、总氮和总磷产生量分别为5892.1t/a、995.6t/a、2888.2t/a和1105.1t/a,污染负荷主要来自面源污染.通过2002 ～ 2011年邛海水质监测数据分析,邛海水质近10年总体保持Ⅱ～Ⅲ类,处于中营养状态,2004～ 2006年水质相对较差,2006年以后水质逐渐好转.总磷、总氮是邛海主要污染因子,海河口是邛海污染最严重的区域.为实现邛海水质和流域生态环境持续改善,从产业结构优化、流域污染源治理、生态保育和流域生态环境综合监管等方面提出对策建议.     

Release,Dispersion, and Resuspension of Escherichia coli From Direct Fecal Deposits Under Controlled Flows1

Abstract: Water‐quality standards have been placed on fecal indicator organisms such as Escherichia coli in an attempt to limit the concentrations in water bodies. Cattle can be a significant source of bacteria to water systems, particularly when they are allowed direct access to streams. A flume study was conducted to quantify the effect and understand the transport of E. coli from directly deposited cattle manure. Five steady‐state flows, ranging from 0.00683 to 0.0176 m³/s, were studied and loads from a single cowpie exceeded the U.S. Environmental Protection Agency’s recommended water‐quality standards (235 CFU/100 ml) at each flow over the hour study period. Average E. coli concentrations ranged from 10² to 10⁵ CFU/100 ml over the hour sampling period for all flows. High spatial variations in E. coli concentrations were often seen at each sampling time, with higher concentrations typically at the bottom of the flume. E. coli resuspension was initially greater at 0.5 min after deposition, for the lowest flow (10⁵ CFU/m²/s); however, resuspension rates became similar over time, on the order of 10³ CFU/m²/s. This study demonstrates that the concentrations of E. coli can vary over the water column, and therefore grab samples may inaccurately measure bacteria concentrations and loads in streams. In addition, resuspension rates were often high, so the incorporation of this process into water‐quality models is important for bacteria prediction.