山西省绿色转型发展现状评价及路径研究

从经济、社会、资源、环境保护4个层面构建了切合山西省实际情况的绿色转型发展指标体系,采用熵权法及聚类分析方法对山西省的绿色转型发展现状进行了评价,根据评价结果,结合政策背景,提出了山西省实现绿色转型发展的路径,以实现山西省均衡快速的绿色转型发展。     

An application of a modified theory of planned behavior model to investigate adolescents’ job safety knowledge,norms, attitude and intention to enact workplace safety and health skills

Introduction: For many reasons, including a lack of adequate safety training and education, U.S. adolescents experience a higher rate of job-related injury compared to adult workers. Widely used social-psychological theories in public health research and practice, such as the theory of planned behavior, may provide guidance for developing and evaluating school-based interventions to prepare adolescents for workplace hazards and risks. Method: Using a structural equation modeling approach, the current study explores whether a modified theory of planned behavior model provides insight on 1,748 eighth graders’ occupational safety and health (OSH) attitude, subjective norm, self-efficacy and behavioral intention, before and after receiving instruction on a free, national young worker safety and health curriculum. Reliability estimates for the measures were produced and direct and indirect associations between knowledge and other model constructs assessed. Results: Overall, the findings align with the theory of planned behavior. The structural equation model adequately fit the data; most path coefficients are statistically significant and knowledge has indirect effects on behavioral intention. Confirmatory factor analyses suggest that the knowledge, attitude, self-efficacy, and behavioral intention measures each reflect a unique dimension (reliability estimates ≥0.86), while the subjective norm measure did not perform adequately. Conclusion: The findings presented provide support for using behavioral theory (specifically a modified theory of planned behavior) to investigate adolescents’ knowledge, perceptions, and behavioral intention to engage in safe and healthful activities at work, an understanding of which may contribute to reducing the downstream burden of injury on this vulnerable population—the future workforce. Practical application: Health behavior theories, commonly used in the social and behavioral sciences, have utility and provide guidance for developing and evaluating OSH interventions, including those aimed at preventing injuries and promoting the health and safety of adolescent workers in the U.S., who are injured at higher rates than are adults.     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

Experimental research of LNG accidental underwater release and combustion behavior

Evaluating potential hazards caused by accidental LNG release from underwater pipelines or vessels is a significant consideration in marine transportation safety. The aim of this study was to capture the dynamic behavior of LNG jet released under water and to analyze its vapor dispersion characteristics and combustion characteristics on the water surface during different release scenarios. Controlled experiments were conducted where LNG was jet released from a cryogenic storage tank. The dynamic process of LNG being jet released from orifices of different sizes and shapes, as well as the rising plume structure, were captured by a high-speed camera. The leakage flow rate and pipeline pressure were recorded by a flow meter and pressure gauge, respectively. The concentration distribution that emanated from the water surface was measured utilizing methane sensors in different positions with various wind speeds. The flame combustion characteristics of LNG vapor clouds, which immediately ignited upon the enclosed water tank, were also recorded. Additionally, the mass burning rate of the flame on the water surface was evaluated, and a new correlation between the ratio of flame length and width was established. The results indicated a large dimensionless heat release rate (Q*) and a continuous release flow rate in a limited burning area. This study could provide greater understanding of the mechanisms of LNG release and combustion behavior under water.     

Failure mode and effect analysis using regret theory and PROMETHEE under linguistic neutrosophic context

Failure mode and effect analysis (FMEA), which aims to identify and assess potential failure modes in a system, has been widely utilized in diverse areas for improving and enhancing the performance of systems due to it is a powerful and useful risk and reliability assessment instrument. However, the conventional FMEA approach has been suffered several criticisms for it has some shortcomings, such as unable to handle ambiguous and uncertain information, neglect the relative weights of risk criteria, and without considering the psychological behaviors of decision-makers. To ameliorate these limitations, this paper aims at establishing a hybrid risk ranking model of FMEA via combing linguistic neutrosophic numbers, regret theory, and PROMETHEE (Preference ranking organization method for enrichment evaluation) approach. In the presented model, linguistic neutrosophic numbers are adopted to capture decision-makers’ evaluation regarding the failure modes on each risk criterion. A modified PROMETHEE approach based on regret theory is presented to obtain the risk priority of failure modes considering the psychological behaviors of decision-makers. Moreover, a maximizing deviation model and TOPSIS (Technique for order preference similar to ideal solution) are separately applied to derive the weights of risk criteria and decision-makers. Finally, a numerical example relating to the supercritical water gasification system is employed to implement the presented method, and the effectiveness and feasibility of the proposed model are validated by the results derived from a sensitivity and comparison analysis.     

Study on explosion risk of aluminum powder under different dispersions

This paper mainly studied the influence of particle size distribution on the explosion risk of aluminum powder under the span of large particle size distribution. The measurement was carried out with the 20 L explosion ball and the Hartmann tube. The statistical analysis was used to analyze the relevance between the parameters of explosion risk and the particle size parameters. Test results showed that with the increase of particle size, the sensitivity parameter increases and the intensity parameter deceleration decreases. The effect of particle size change on MEC and MIE of small particle size aluminum powder is relatively small but greater impact on Pm and (dP/dt)m. The small particle size components greatly increasing the sensitivity of the explosion and accelerating the rate of the explosion reaction; while the large particle size component contributes to the maximum explosion pressure. D_3,2 particle size dust determines the risk of aluminum powder explosion.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

Misoperation monitoring and early warning during startup and shutdown of petrochemical units

Most petrochemical units run under extreme conditions, such as high temperatures, pressures, and speeds. Consequently, the equipment operators may commit errors because the startup and shutdown processes usually involve complicated operation steps; moreover, the operators may lack experience in handling abnormal situations. Misoperation can lead to accidents, including fires and explosions. Thus, risk analysis for process operations and the development of preventive measures have become an effective means of avoiding misoperation-related accidents. However, it is challenging to ensure the comprehensiveness of risk-analysis results. In this paper, we present a method for misoperation monitoring and early warning in the startup and shutdown processes of petrochemical units. The mechanisms of misoperation occurrence are summarized based on investigations of serious accidents in the recent past. Knowledge regarding the mechanisms of misoperation is crucial for the risk analysis of petrochemical units. The potential risk information, such as causes, adverse consequences, key monitoring parameters, and prevention control solutions, should be acquired and be employed to construct an early-warning knowledge database. Furthermore, misoperation judgment rules need to be formulated to identify misoperations. The data obtained from the monitoring module, misoperation judgment rules, and analysis results can aid in developing schemes to avoid possible abnormal situations. This paper reports a misoperation monitoring and early-warning system for a hydrogenation unit. As demonstrated, conducting risk analysis to determine the potential operational risks and formulating misoperation judgment rules to analyze the process data are essential for enabling early warning. The application of this method will contribute to operational guidance, economic loss reduction, and accident avoidance.