林聪悟-直线法在基于美国混凝土规范设计中的程序实现

首先,阐述了美国ACI318-08规范中钢筋混凝土受弯、受压构件的设计原理和基本假定。与我国混凝土结构设计规范不同,ACI318-08规范是根据构件的受力破坏形态来确定名义抗压和抗弯承载力的折减系数的,相对于延性破坏,脆性破坏构件的承载力折减较多。然后,由平衡条件、平截面假定及Newton迭代格式,推导出林聪悟-直线法的计算公式。编制程序实现该算法时,须根据最大、最小配筋率的规定对迭代区域进行限定;在确定P-M相关曲线上的拐点位置的基础上,实现中性轴高度在曲线上的分段迭代。通过在曲线拐点处设置微小增量及自动调整中性轴高度等方法,解决了程序计算时可能出现的迭代发散问题。算例表明,所编制程序的计算结果具有很高的精度。     

小煤柱巷道围岩变形的力学机理及演化过程研究

为研究小煤柱巷道围岩变形力学机理与演化过程,以石槽村矿某回风巷为研究对象,采用理论分析、FLAC3D数值模拟以及现场实测等方法,分析小煤柱条件下巷道围岩变形的主要影响因素以及表征特点。研究结果表明:侧压系数为巷道围岩变形的主控因素;侧压系数与巷道顶底板位移量呈正比关系,与两帮位移量呈反比关系;回风巷每次受采动影响时,变形可分为巷道稳定阶段、位移分化阶段以及位移加速变化阶段;围岩变形主要发生在一次采动影响时,此时巷道变形呈现明显的不对称,左右两帮的位移量差异明显,巷道的中心位置明显偏移。研究结果可为小煤柱巷道围岩支护提供技术参考。     

芦苇植株对湿地温室气体排放的影响及其日变化特征

利用静态箱-气相色谱法对夏季(7月、8月和9月)长江河口湿地芦苇植被CO_2、CH_4和N_2O的叶面通量、茎秆扩散速率以及沉积物通量的日变化进行研究。结果显示,通过芦苇叶片排放的N_2O与CH_4的量分别为2.99μg/(m~2·h)和15.36μg/(m~2·h),CO_2则呈现白天吸收(-120.86 mg/(m~2·h))、夜间排放(69.39 mg/(m~2·h))的特点。芦苇茎秆N_2O、CH_4和CO_2平均扩散速率分别为1.96μg/h、142.45μg/h和10.69 mg/h,沉积物平均排放通量为N_2O 8.18μg/(m~2·h)、CH_41.58 mg/(m~2·h)、CO_2169.66 mg/(m~2·h)。芦苇茎秆和沉积物界面CH_4和CO_2的排放均呈现出明显的"单峰型"昼夜变化规律,其排放峰值集中在日照及温度最高的9:00至15:00。芦苇植株是影响温室气体排放变化的因素之一。芦苇植株在光合作用下吸收CO_2并促进CH_4的排放,而芦苇发达的根系及茎秆是温室气体排放的主要途径。同时,Pearson相关性分析表明温度对芦苇群落CH_4和NO2的排放影响显著,但与CO_2通量的相关性不明显。土壤氧化还原电位对3种气体的排放均有显著影响。     

再生铜冶炼过程中重金属排放特征和控制

再生铜冶炼是重要的重金属排放源,为掌握再生铜冶炼过程中重金属的排放特征和控制效果,通过固定源等速采样装置采集不同冶炼阶段的烟气样品,利用电感耦合等离子体质谱仪测定烟气和飞灰中重金属的浓度,并估算重金属的排放因子.结果表明,在冷却阶段烟气中重金属和颗粒物的浓度较高,经过布袋除尘器和吸附塔等污染控制装置后,重金属和颗粒物被协同脱除,脱除效率达80%～99%.排放烟气中重金属的浓度在阳极炉不同工艺段中的排序为：加料熔融段>氧化段≈还原段,且As、 Pb、 Cr、 Sn、 Sb和Cd的平均排放因子分别为2.6×10³、2.4×10³、2.7×10³、5.6×10²、34.1和9.8 mg·t^-1,烟气中重金属和颗粒物的浓度均满足行业排放标准.飞灰中Cu和Zn的浓度较高,具有回收利用价值.     

太原市多环芳烃(PAHs)排放清单与分布特征分析

根据太原市11种主要排放源的排放因子和活动量数据,估算了美国国家环境保护局(US EPA)优先控制污染物清单中16种多环芳烃(PAHs)的年排放量.结果表明2010年太原市16种PAHs的排放量约为332.10t,其中7种致癌性PAHs排放总量为35.11t.从排放源看,生活燃煤和炼焦煤是太原市排放PAHs的主要来源,占总排放量的65%以上.从各地区的PAHs排放情况看,排放量最大的地区是清徐县(87t/a),占总排放的27%.其次为古交市(54t/a)、晋源区(44t/a)、尖草坪区(40t/a).各地区人均收入与单位GDP排放量之间呈负相关 (R2=0.727);各地区PAHs排放量与农村人口之间呈正相关(R2=0.813),从排放谱看,排放以低环PAHs为主(81%),致癌性PAHs占总排放量的10.6%.结果表明,太原市PAHs的排放与太原市特殊的能源结构和人群结构有关.     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

利用活化粉煤灰处理造纸废水的研究

通过正交试验,对粉煤灰处理造纸废水的影响因素进行了研究。研究结果表明：对粉煤灰进行活化,能增加其对造纸废水COD的去除效果;最佳的试验设计方案为：粉煤灰经40％硫酸活化、粒度160—200目、投加量为30g／100ml;影响COD去除率的大小顺序为：投加量影响最大,粒度次之,活化方式影响最小。     

广州市白云山降水的化学特征及源解析

以2006年广州市白云山降水监测资料为基础,对其降水样品的化学特征进行了分析。结果表明,白云山降水样品pH值分布为3.04—6.41,雨量加权pH平均值为4.26,酸雨频率为70.2％,降水中的主要阳离子是Ca^2＋和NH^＋4分别占阳离子总量的46.4％和17.5％;主要阴离子为SO^2-4和NO^-3,分别占阴离子总量的59.0％和19.9％。相对酸度（FA）和中和因子（NF）计算结果表明,约有84.7％的降水酸度被碱性成分Ca^2＋和NH^＋4中和。利用富集系数方法,计算结果表明SO^2-4和NO^-3主要来源于人类活动,而Ca^2＋和K^＋主要来源于岩石／土壤风化。     

The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。