Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

多层商住楼抗震设防投资效益评价

针对不同结构多层商住楼的具体特征，运用结构易损性分析方法对各类房屋未来的震害情况进行了分析，给出了震害损失与投资效果的综合评价方法，为进行这类房屋的结构选型、设计及工程投资的优化提供一定的理论依据。     

一种DSP+FPGA实时信号处理系统

简要叙述了常用的信号处理系统的类型与处理机结构,介绍了正逐步得到广泛应用的DSP+FPGA处理机结构,在此基础上提出了一种实时信号处理的线性流水阵列,并举例说明了该结构的具体实现,最后分析说明了此结构的优越性。     

县域经济所有制结构的调整

县域经济的所有制结构所表现出来的经济实体形式包括县属地方国有经济、多种形式的集体经济和民营经济,探讨了县域经济所有制结构的形式及其在市场经济中的作用.     

拉索预应力空间网格结构的索张力计算及张拉全过程分析

实际工程中,对于拉索预应力空间网格结构的索张拉是一个需要反复调整的繁琐过程。对此,提出了一种针对多阶段多批次张拉施工全过程分析的计算方法,用以提高索张拉施工的效率。该法通过不断减小拉索实际张力与目标张力的差值来求解各索在张拉过程中应该产生的初始应变,最后只要利用计算结果并按照预定的顺序张拉,便可使所有索只经过一次张拉就能最终达到各自的目标张力值。对一个150 m跨度的拉索预应力球面巨型网格结构进行了计算,并利用计算结果,对结构的杆件内力和最大节点位移进行了张拉全过程跟踪分析。结果表明,在实际工程中采用上述方法进行计算与张拉是切实可行的,另外,在张拉过程中进行跟踪分析十分必要。     

混合接种PN与PN/A颗粒污泥快速启动连续流自养生物脱氮反应器

在连续流条件下,快速培养亚硝化-厌氧氨氧化（PN/A）颗粒污泥是实现污水高效生物脱氮处理的关键技术. 与PN/A污泥相比,亚硝化（PN）颗粒污泥具有生长周期短、易于批量化培养的优点,并可作为富集厌氧氨氧化菌（AMX）的载体. 在3个完全混合流反应器（R1~R3）中,分别按照质量比3∶1、1∶1和1∶3混合接种PN/A和PN颗粒污泥,并通过设置高氨氮负荷、短水力停留时间和强水力剪切条件,成功启动了连续流自养生物脱氮工艺. 结果表明,尽管R3的启动时长较R1和R2更长,但污泥接种比并未显著影响连续流反应器在稳定状态下的脱氮性能,总氮去除负荷均可达到2.6 kg·（m³·d）^-1以上. 接种的PN颗粒污泥通过提供好氧氨氧化菌种（AOB）,为AMX生长供给了充足的亚硝态氮基质,充分发挥了培养PN/A颗粒污泥的前驱体作用. 由高通量测序结果可知,R1~R3中成熟颗粒的微生物丰度和多样性指数均明显高于接种污泥. AOB（Nitrosomonas属）和AMX（Candidatus Kuenenia和Brocadia属）与Chloroflexi、Bacteroidetes和Chlorobi等异养菌门是驱动自养生物脱氮和维持颗粒结构稳定的关键菌群. 总之,PN与PN/A颗粒污泥的混合接种是快速启动连续流自养脱氮工艺的可行策略,对工程应用具有指导意义.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

聚苯乙烯基硫代磺酸钾树脂的合成及其与卤代烃的反应

由聚苯乙烯基磺酰氯树脂与硫化氢钾反应制备聚苯乙烯基硫代磺酸钾树脂（Ｉ）,树脂Ｉ与亲电的卤代烃反应,生成聚苯乙烯基硫代磺酸酯树脂（Ⅱ）,树脂Ⅱ经过乙硫醇处理,使卤代烃结构部分以不对称二硫醚的形式游离下来,用ＧＣ／ＭＳ对其结构进行鉴定。从不对称二硫醚的结构可推导出原卤代烃的结构,所制备的聚苯乙烯基硫代磺酸钾树脂的转化效率为１．１１ｍｍｏｌ·ｇ＾－１。     

活性碳纤维改性技术研究进展

介绍了活性碳纤维(ACF)的孔结构及表面官能团,综述了国内外ACF改性技术的研究现状.ACF的改性主要包括孔结构调控和表面化学改性,表面化学改性包括氧化还原法、表面负载法、浸渍法、热处理法、远程等离子体处理法、微波辐照法等,也可将多种方法结合来对ACF进行改性,以改善和提高ACF的吸附性能.在总结现有研究的基础上,对ACF改性技术发展趋势进行了展望.     

苏打盐碱地养鱼稻田水体微生物区系研究

对松嫩平原苏打盐碱地养鱼稻田水体微生物数量及种类组成进行了初步研究。结果表明,养鱼稻田异养细菌数量为0.280万～30.716万mL-1,高于未养鱼稻田(P<0.05),其平均值的时间分布为水稻生长末期>中期>初期;养鱼稻田和未养鱼稻田放线菌和霉菌数量均较少。养鱼稻田大肠菌群数量为403.6～17934.2L-1,显著高于未养鱼稻田(P<0.01),其平均值的时间分布为水稻生长中期>初期>末期。异养细菌数量与鱼产量、总施肥量和有机肥施用量均呈极显著相关,与化肥施用量相关不显著;大肠菌群数量与鱼产量相关显著,与总施肥量相关不显著,但与有机肥施用量相关极显著。养鱼稻田中检测出10个科(属)异养细菌,优势菌为弧菌属(Vib rion)、气单胞菌属(Aeromonas)和芽孢杆菌属(Bacillus)。