纳米Ag粒子原位杂化PVDF超滤膜的抗污染性能

以AgNO3为前驱体,聚偏氟乙烯(PVDF)为聚合物基体,聚乙烯吡咯烷酮(PVP)为分散剂和成孔剂,N,N-二甲基甲酰胺(DMF)为还原剂和溶剂,利用相转化法制备了纳米Ag粒子原位杂化PVDF超滤膜.采用扫描电镜、透射电镜、原子力显微镜及接触角测定仪对杂化膜的结构和性能进行了表征.结果表明:原位形成的纳米Ag粒子均匀地分散在聚合物基体中,纳米Ag粒子的添加改善了PVDF膜的亲水性能.以腐殖酸和牛血清蛋白作为污染物的代表,考察了Ag/PVDF膜的抗有机污染性能.以大肠杆菌、耐甲氧西林金黄色葡萄球菌及活性污泥作为微生物的代表,考察了杂化膜的抗生物污染性能.结果证实了与纯PVDF膜相比,Ag/PVDF膜通量衰减较慢,可有效抑制微生物的生长,表面受活性污泥污染程度小,具有显著的抗有机污染和抗生物污染性能.     

Gas separation using porous cement membrane

Gas separation is a key issue in various industrial fields. Hydrogen has the potential for application in clean fuel technologies. Therefore, the separation and purification of hydrogen is an important research subject. CO2 capture and storage have important roles in ＂green chemistry＂. As an effective clean technology, gas separation using inorganic membranes has attracted much attention in the last several decades. Membrane processes have many applications in the field of gas separation. Cement is one type of inorganic material, with the advantages of a lower cost and a longer lifespan. An experimental setup has been created and improved to measure twenty different cement membranes. The purpose of this work was to investigate the influence of gas molecule properties on the material transport and to explore the influence of operating conditions and membrane composition on separation efficiency. The influences of the above parameters are determined, the best conditions and membrane type are found, it is shown that cementitious material has the ability to separate gas mixtures, and the gas transport mechanism is studied.     

Effect of ozone on the performance of a hybrid ceramic membrane-biological activated carbon process

Two hybrid processes including ozonation-ceramic membrane-biological activated carbon （BAC） （Process A） and ceramic membrane-BAC （Process B） were compared to treat polluted raw water. The performance of hybrid processes was evaluated with the removal efficiencies of turbidity, ammonia and organic matter. The results indicated that more than 99% of particle count was removed by both hybrid processes and ozonation had no significant effect on its removal. BAC filtration greatly improved the removal of ammonia. Increasing the dissolved oxygen to 30.0 mg/L could lead to a removal of ammonia with concentrations as high as 7.80 mg/L and 8.69 mg/L for Processes A and B, respectively. The average removal efficiencies of total organic carbon and ultraviolet absorbance at 254 nm （UV254, a parameter indicating organic matter with aromatic structure） were 49% and 52% for Process A, 51% and 48% for Process B, respectively. Some organic matter was oxidized by ozone and this resulted in reduced membrane fouling and increased membrane flux by 25%-30%. However, pre-ozonation altered the components of the raw water and affected the microorganisms in the BAC, which may impact the removals of organic matter and nitrite negatively.     

Anoxic gas recirculation system for fouling control in anoxic membrane reactor

Anoxic gas recirculation system was applied to control the membrane fouling in pilot-scale 4-stage anoxic membrane bioreactor(MBR). In the anaerobic-anoxic-anoxic-aerobic flow scheme,hydrophilic polytetrafluoroethylene(PTFE) membrane(0.2 μm, 7.2 m2/module) was submerged in the second anoxic zone. During 8 months operation, the average flux of the membrane was 21.3L/(m2·hr). Chemical cleaning of the membrane was conducted only once with sodium hydroxide and sodium hypochlorite. Dissolved oxygen(DO) concentration in the second anoxic zone was maintained with an average of 0.19 ± 0.05 mg/L. Gas chromatography analysis showed that the headspace gas in the second anoxic reactor was mainly consisted of N2(93.0% ± 2.5%), O2(3.8% ± 0.6%), and CO2(3.0% ± 0.5%), where the saturation DO concentration in liquid phase was 1.57 mg/L. Atmospheric O2 content(20.5% ± 0.8%) was significantly reduced in the anoxic gas. The average pH in the reactor was 7.2 ± 0.4. As a result, the recirculation of the anoxic gas was successfully applied to control the membrane fouling in the anoxic MBR.     

ABR-MBR一体化工艺节能降耗措施优化研究

能耗高和膜污染是限制膜生物反应器(MBR)广泛应用的重要因素.为降低工艺运行能耗和延缓膜污染,以厌氧折流板反应器(ABR)-MBR工艺处理生活污水为例,对工艺结构和脱氮除磷运行条件进行优化.结果表明,通过优化ABR-MBR工艺结构,可降低43%的运行能耗,同时可保持较高的COD、NH+4-N、TN和TP去除效果,平均去除率分别为91%、85%、76%和86%.另外,添加颗粒填料可有效延缓膜污染,不过也改变了膜污染的形成过程,膜内部污染物含量显著增多,碳水化合物含量增加,而蛋白质含量减少,碳水化合物/蛋白质比明显增大.最终,增强了MBR反应器的实际应用性能.     

膜生物反应器中膜过滤特征及膜污染机理的研究

以膜生物反应器处理市政污水,通过对活性污泥进行终端过滤来反映膜污染机理,实验表明,最初很短时间内膜污染受膜孔堵塞模型控制,之后受沉积层阻力模型控制,后一阶段是膜污染的主要控制阶段;膜的相对通量随过滤时间呈指数衰减趋势,压力越大,通量衰减越快;污泥沉积层存在压密过程,这一过程中的污泥比阻随压力增大而增大,并得到处理市政污水的污泥压密指数为0.807 8;阻力分布实验表明沉积层阻力占总阻力的90%以上,是膜过滤污染阻力的主要组成部分;活性污泥各组分对膜污染均有贡献,其中悬浮固体、胶体颗粒和溶质产生的阻力分别占87.98%、6.20%和5.82%;根据实验和计算结果,探讨了MBR处理市政污水过程中可能的膜污染机理.     

Postnatal management of prenatally diagnosed abdominal masses and anomalies

Rapid advancement in fetal diagnostic imaging has increased our ability to diagnose a multitude of anomalies in the prenatal period. The purpose of this chapter is to review our current understanding of prenatally diagnosed intra-abdominal lesions, and describe the current guidelines for the postnatal management and subsequent outcome for these lesions. Copyright © 2008 John Wiley & Sons, Ltd.     

Relative risk of abnormal karyotype in fetuses found to have an atrioventricular septal defect (AVSD) on fetal echocardiography

One hundred and twenty-five fetuses were identified as having an AVSD with normal venous connections, normal arterial connections and normal cardiac situs on fetal echocardiography. Fetal karyotype was known in 111 of these cases. The relative risk of fetal trisomy 21 at mid-trimester was 107 (95% CI 87–127) times the expected number of cases compared with risk from maternal age alone, and that for trisomy 21,18 or 13 was 95 (95% CI 79–109). This data may be useful in counselling pregnant women about risk of fetal karyotypic abnormality after a diagnosis of fetal AVSD. Copyright © 2005 John Wiley & Sons, Ltd.