自洁式三级串联的水样在线过滤系统的研制和应用

基于玻璃纤维对小颗粒物的截留和微孔过滤,以及超声波辅助清洗等方法原理,设计和制作了带反冲洗自洁功能的三级串联在线过滤系统,将滤网（初级）、超声波作用下装填有玻璃纤维的过滤器（二级）、微孔滤管（三级）串联,对较高浊度的环境水样进行在线过滤。评估了模拟水样和实际水样中浊度的去除效果,证明该系统对水样中颗粒物有很好的去除并大幅降低水样浊度。在优化的条件下,原始浊度范围在4～100NTU的水样经过滤后,浊度均能降至1NTU以下。以标准方法测定的典型水质指标（活性磷、铵氮、亚硝酸盐氮和硝酸盐氮）的浓度为基准,计算水样经所设计的过滤系统处理后,这4种营养盐的回收率一般在85％-130％之间,说明本系统的使用基本不影响目标物的测定。     

Filterability of oil sands tailings

In Canadian oil sands mining operations, bitumen is extracted from oil sands using the hot water extraction process, which produces tremendous amounts of tailings. Currently, these tailings are disposed of in large ponds, in which coarse particles settle out relatively quickly and fine particles remain suspended in water and settle very slowly. After years of settling, the fine particles form a stable suspension in water known as mature fine tailings (MFTs). Long-term storage of the MFT is costly and poses a major environmental liability.Oil sands companies are now actively investigating different approaches to replace or reduce the use of oil sands tailings ponds. Filtration of the tailings to produce “dry tailings” for stacking is now being investigated as an alternative by a number of companies. Fast water drainage is a critical step for the filtration process. In this paper, we use simple laboratory-scale filtration tests to evaluate the filterability of the oil sands tailings and to generate a parameter that can be used in filtration scale-up. It was found that the filterability of the original coarse oil sands tailings was relatively low. However, after the fines are flocculated with the coarse particles to form uniform flocs the filterability was improved by several orders of magnitude. The results demonstrate that filtration of the flocculated coarse tailings to produce the “dry” stackable tailings may be viable.     

活性炭纤维处理腐植酸废水

采用活性碳纤维处理腐植酸模拟废水,通过静态吸附和动态吸附的研究,测定吸附等温线和动态吸附曲线;研究不同温度、不同活性炭纤维、不同pH值和流速对处理效果的影响。     

多波长法用于减小浊度对水源水中甲醛测定结果的影响

比较了减小水样浊度对样品结果影响的各种方法,包括过滤法、双波长法、三波长法,3种方法均基于乙酰丙酮分光光度法,测定波长均为414 nm。结果表明,以480 nm为参比波长的双波长法所得方法检出限为0.027 mg/L,采用470 nm与360 nm、460 nm与370 nm、450 nm与380 nm 3对参比波长的三波长法测得方法检出限为0.025~0.028 mg/L,这些方法用于检测0.100 mg/L标准点样品时,检测结果 RSD介于8.0%~8.6%。双波长法适合低浊度样品的直接分析,而浊度较高或双波长法测得结果大于方法检出限时,应采用三波长法进行定量分析,他们的使用有助于提高方法的准确度及减少工作量。用于地表水样品分析时,0.200、0.400 mg/L加标样品的回收率介于90.3%~101%,对应RSD介于0.0%~4.2%。     

剑麻纤维基多孔炭材料的制备及其吸附氯苯的研究

以剑麻纤维为原料,通过简易的一步炭化活化法制备了一系列多孔炭材料,分别探究了3种温和的金属盐活化剂、活化剂与剑麻纤维的质量比和活化温度对炭材料的氯苯吸附量的影响,并通过BET、SEM、XRD、Raman、FT-IR、元素分析等手段表征其物理化学性质.结果表明,当采用CuCl₂为活化剂、CuCl₂与剑麻纤维的质量比为10∶1及活化温度为800℃时,制备得到的剑麻纤维基多孔炭(PCC)吸附性能最佳,其在氯苯浓度为1560 mg·m^-3时,吸附量达到856 mg·g^-1,而未经CuCl₂活化的炭材料(PC)的氯苯吸附量仅为15 mg·g^-1.氯苯吸附性能的提升主要归因于比表面积、孔容、无序性和表面含氧官能团的增加.此外,采用巨正则系综蒙特卡洛(GCMC)方法模拟氯苯分子在制备的多孔炭材料中的吸附行为,结果表明,该材料中孔径为0.5 nm的孔对氯苯分子的吸附能力最强,且对氯苯吸附起主导作用的为苯环中心和Cl原子与炭材料上连接含氧官能团的H原子之间的静电作用力.     

表面过滤技术在焚烧厂烟气脱酸净化中的作用

随着城市垃圾焚烧工程的发展，国家对焚烧后尾气的处理技术提出了越来越高的要求。基于“表面过滤”理论的Gore过滤技术，不但为粉尘排放达到欧洲标准提供了技术保障，而且为脱酸／硫的后续反应提供了反应界面，在实际应用中可以有效节约反应剂。     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.     

用改性活性碳纤维去除CO2原料气中的H2S

采用固定床动态吸附实验，用改性活性碳纤维（ACF）吸附去除CO2原料气中的H2S。通过改变改性剂种类、反应温度和原料气中CO2浓度，找出用改性ACF去除CO2原料气中H2S的规律。实验结果表明：常温下，可用NaON改性的ACF来消除CO2的酸性对去除H2S的不利影响；随着反应温度的升高，CO2与ACF形成的C（O＊）中间产物增多，CO2的存在有利于改性ACF去除H2S；而当反应温度过高时，CO2与ACF形成的C（O＊）中间产物发生分解，导致ACF碳化，不利于H2S的吸附去除。     

改性活性炭纤维吸附炸药废水中TNT实验研究

本文研究了改性活性炭纤维对炸药废水中TNT的吸附行为。研究表明:1 mol/L HNO3改性的活性炭纤维吸附效果最好,其对炸药废水中TNT的最佳吸附条件为:吸附剂用量为0.6 g/25 m L,吸附平衡时间为60 min,升温有利于吸附进行。Langmuir和Freundlich吸附等温线均能较好地描述活性炭纤维对TNT的吸附,吸附动力学分析表明,吸附过程遵循准二级动力学规律。     

活性炭纤维对于离子的电吸附选择性能研究

通过循环伏安测试、交流阻抗测试、电吸附实验等方法研究了单组分和多组分溶液中不同离子在活性炭纤维电极表面的选择性电吸附性能。结果表明,电吸附选择性能与离子的水合半径、离子价态、离子浓度有关;增大初始浓度可以提高电吸附容量;并且,由于强烈的选择吸附作用,Ca2+离子可以吸附取代其它已经被吸附的离子。