基于场理论的沪苏浙皖地区旅游空间差异研究

区域旅游供给场是一种重要的旅游场类型,场叠加、场结构与场核的作用效应是区域旅游供给场研究的核心内容。在对区域旅游供给场相关概念进行定义与空间解析的基础上,以游客密度作为旅游场强变量,运用GIS技术对由沪苏浙皖这一区域的空间差异进行了模拟和分析,研究结果表明:(1)随着旅游业的发展,区域旅游场的场域分异更为显著,但游客密度的集中程度在下降;(2)区域旅游场内存在较明显的"三阶梯"等级结构特征,且在考察末期,第一阶梯和第二阶梯场域范围不断扩大,尤以第二阶梯的扩大最为明显;(3)由场核向外围随着距离的增加,旅游场强呈现出显著的衰减特征,各次级场域的场核间也存在明显的场强波动地带;(4)区域旅游场极化、扩散作用并存,上海这一区域型场核在极化作用的同时在东西方向上对区域旅游场的扩散作用明显,但其扩散作用强度仍有待提高。     

Basic properties of sintering dust from iron and steel plant and potassium recovery

With the production of crude steel, China produces several million tons of sintering dusts which contain a great deal of valuable metals such as, K, Na, Zn, Pb. If discharged directly without adequate treatment, these elements can lead to adverse effects on the environment. Therefore, it is very necessary to determine how to separate these elements from the dust before discharge. Several physical and chemical detection methods were used to study the basic properties of sintering dust. At the same time, preliminary experiments on the recovery of the potassium resources from the sintering dust were carried out. The mean particle size of the electrostatic precipitator (ESP) dust determined by a laser granulometer was 41.468 μm. Multi-point BET and single-point BET analysis showed that the surface area of the ESP dust was 2.697 m²/g. XRD measurements detected the following phases in the ESP dust: Fe₂O₃, Fe₃O₄, KCl and NaCl, and Fe₂O₃, Fe₃O₄ and SiO₂ in the water-washed dust. SEM-EDS results proved that in the ESP dust, K mostly existed in the form of KCl particles without being coated. Leaching experiments showed that the KCl in the ESP dust could be separated and recovered by water leaching and fractional crystallization. Through the recovery experiments, the yield of K-Na vaporized crystalline salt was 18.56%, in which the mass fractions of KCl, NaCl, CaSO₄ and K₂SO₄ were about 61.03%, 13.58%, 14.03% and 9.97%, respectively. This process is technically viable and considerable in economic benefit. There was almost no secondary pollution produced in the whole recovery process.     

Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode

Powder mixed near dry electrical discharge machining (PMND-EDM) is a novel electrical discharge machining (EDM) process. It is proposed to further improve the machining efficiency of dry EDM. The principle of material removal in PMND-EDM is illustrated and its deionization principle is proposed. The influence of residual heat on MRR is analyzed. The concept of superfluous residual heat is proposed. The material removal rate (MRR), the main index of machining efficiency for PMND-EDM process, is researched. Single factor experiments are performed to get effect of peak current, pulse on time, pulse off time, flow rate, tool rotational speed, air pressure and powder concentration on MRR under different material combinations of tool electrode and workpiece electrode. Thermal phenomena in PMND-EDM are illustrated. Effect of each process parameter on MRR of PMND-EDM is gotten and analyzed based on the deionization principle of PMND-EDM. Differences in MRR under different material combinations are found out. Brass tool electrode and W18Cr4V workpiece gain higher MRR under most of discharge conditions, while the superiority of copper tool electrode and 45 carbon steel workpiece in MRR arise when there is improper heat dissipation. The difference is analyzed based on the deionization principle of PMND-EDM.     

Numerical analysis of keyhole geometry and temperature profiles in plasma arc welding

In keyhole plasma arc welding (PAW), the formation of the keyhole involves complicated thermo-physical mechanism. The shape and dimensions of the keyhole directly determine the heat deposition along the thickness direction of the test plates, the penetration depth and the weld bead quality. Based on analysis of the forces acting on the weld pool, a keyhole model is established according to the force-balance condition on the keyhole wall. The shape and dimensions of quasi-steady state keyhole are numerically predicted. The keyhole shape and size are used to calibrate some distribution parameters of the combined volumetric heat source which takes into consideration the geometrical feature of welds with larger ratio of penetration depth to width and volumetric distribution characteristic of the plasma heat intensity along the plate thickness direction. The temperature fields on stainless steel plates are numerically simulated. The calculated fusion line at the transverse cross-section of PAW welds are compared with the experimental measurements. It is found that the predicted results are in agreement with the experimental data.     

气流清扫的超音速喷管气动设计及其性能的对比分析

目的 提出使用拉瓦尔喷管产生高速气流清扫固体表面附着的水膜。方法 设计中心轴对称锥形喷管(Taper-A)、中心轴对称Sivell法喷管(Sivell-A)、中心轴对称短化喷管(MLN-A)和二维锥形型线喷管(Taper-2D),建立包括外流场的LES数值仿真模型,并进行仿真,分析研究外流场结构,并基于韦伯数判据,分析超音速喷管的清扫性能。结果 喷管短化设计方法可以将喷管长度缩短50%。外流场速度呈波动衰减趋势,特征线法喷管的气流膨胀更充分。缩短喷管长度会减小内流场的附面层厚度,因此MLN-A在速度波动中的能量耗散较少;喷管过长也会降低清扫性能,MLN-A和Taper-2D在xL>2区域的最大等效水膜厚度小于0.2 μm,但MLN-A有效清扫面积比Taper-A的喷管提高15%以上,清扫性能最优。结论 喷管短化设计方法可以有效缩短喷管。喷管结构对清扫性能影响较大。MLN-A喷管的清扫性能最优。     

某油田采出水用杀菌剂急性毒性研究与职业病防护建议

目的:对某油田采出水用杀菌剂毒性进行评价,为员工安全操作及职业病防护提供依据。方法:采用动物试验方法,对某油田采出水用杀菌剂进行急性毒性实验研究。结果:该油田采出水用杀菌剂对SD大鼠的急性经口半数致死剂量(LD 50)为3160 mg/(kg·bw),属实际无毒级;对普通级成年新西兰白兔皮肤为中等刺激性,对眼睛为严重眼损伤/对眼造成不可逆影响;对普通级白化豚鼠皮肤为低致敏性。结论:该油田采出水用杀菌剂对皮肤、眼睛可能存在较大损伤,作业人员进行相关作业时应做好防护。     

中国稻田土壤镉污染及务农性暴露概率风险

为了解中国稻田土壤镉污染时空变异特征及其务农性接触的健康风险,对1991~2017年发表的205篇有关稻田土壤镉调查文献进行系统回顾,并采用USEPA推荐的健康风险评估概率模型对健康风险进行评估.结果表明,全国稻田土壤镉平均浓度[（0.54±1.38）mg/kg]显著高于全国表层土壤镉背景值（0.097mg/kg）.虽未见显著的时间变异（β=-0.002,95%置信区间：-0.025~0.022）,但不同地区和不同人为扰动下的稻田土壤镉浓度存在较大异质性：华南[（0.88±1.59）mg/kg]>西南[（0.46±0.85）mg/kg]>华东[（0.44±1.45）mg/kg]>华北[（0.36±1.05）mg/kg]>东北[（0.35±0.83）mg/kg]>西北[（0.01±0.05）mg/kg]和矿冶[（1.77±2.18）mg/kg]>其他工业活动[（0.64±1.22）mg/kg]>电子垃圾拆解[（0.59±0.87）mg/kg]>污灌[（0.57±1.26）mg/kg]>交通[（0.56±0.86）mg/kg]>常规稻田[（0.25±0.34）mg/kg].除西北地区外,各地区稻田土壤镉浓度均出现不同程度的超标现象,尤其华南地区34%条土壤镉浓度数据超过农用地土壤镉污染风险管制值（1.5mg/kg）.土壤镉务农性接触的非致癌风险（HQ<<1）处于可接受水平,其中皮肤接触是主要途径,女性是务农性土壤镉暴露的高风险人群,华南和西南地区是务农性土壤镉暴露的高风险地区.     

富炭硅肥对水稻土铁还原菌群落特征的影响

为了探究富炭硅肥施加处理对稻田土壤铁还原菌相对丰度、多样性及群落结构的影响,以福州平原稻田为研究对象,分别设置对照组及3种不同剂量（300,600和900kg/hm²）富炭硅肥施加处理组.研究结果表明：施加富炭硅肥有助于土壤铁还原菌的生长和繁殖,其中600kg/hm²施加处理对铁还原菌的生长影响最为显著（P<0.05）.由Shannon指数可知,3种施加处理均使晚稻拔节期土壤铁还原菌多样性有所下降,以300kg/hm²施加处理组多样性指数降低最为明显,较对照组降低了29.4%.在早、晚稻拔节期土壤中共鉴定出5个菌门,其中变形菌门（Proteobacteria）、拟杆菌门（Bacteroidetes）和厚壁菌门（Firmicutes）的占比之和平均高达95%以上,是稻田土壤中的优势菌门.施加富炭硅肥后,早稻拔节期土壤中拟杆菌属（Bacteroides）的相对丰度显著提高（P<0.05）,而厌氧粘细菌属（Anaeromyxobacter）的相对丰度则有所降低.此外,环境因子与稻田土壤铁还原菌的相对丰度具有相关性,Desulfovibrio的相对丰度与土壤pH值呈显著正相关（P<0.05）,Anaeromyxobacter的相对丰度与土壤温度（ST）呈显著正相关（P<0.05）.     

基于摩擦纳米发电机的微塑料实时检测实验研究

采用基于自供电的摩擦纳米发电机(TENG)技术,设计开发了一种利用间断液柱检测水样内微塑料颗粒尺寸和丰度的实时快速检测方法和装置,并通过实验测试完成了对微塑料的尺寸形貌表征和化学元素组成的实时高效检测.研究发现,去离子水中加入微塑料颗粒时,溶液中zeta电位降低,改变了管壁表面的极化电场方向;随着水溶液中微塑料颗粒直径或丰度的增加,开路电压呈现减小趋势,50μm时减小了43.1%,0.250%浓度时减小了79.6%;微塑料颗粒对自来水的开路电压影响显著,以10μm微塑料颗粒为例,开路电压减小了20%,证明了TENG技术对海洋微塑料检测的可行性.     

水下枪炮发射问题研究综述

首先介绍了水下枪炮类武器发射问题的研究意义,并对其军事需求进行了分析。之后对常见的水下枪炮发射方式进行了介绍,并简述了各自的发展历程。总结了目前对水下发射问题内弹道的研究进展,结合水下枪炮发射问题自身特点,阐述了燃气射流的形成机理以及相关研究的发展过程,比较性地总结了空气中枪炮发射膛口流场与水下枪炮发射膛口流场的研究进展及对应典型波系结构。最后,对水下枪炮发射领域仍存在的科学问题以及未来发展趋势作出了展望。